Hi Guys
I am running oscam on a debian server at the moment. Also have it running on windows 7. My question is will the card auto update when its in a linux box or PC using smargo? or does it need to be in the sat box. I saw this tut by ten below http://linuxsat-support.com/os…pdating-entitlements.html and my settings are like that but have noticed that this seems to refer to oscam running on the dreambox not on an external server. My entitlements run out tonight midnight so should I have to put the sly card in the original box or should it update on my debian server. Cheers guys
sly card update
-
- Videoguard2 Cards OSCam
- steve67474
- Thread is marked as Resolved.
There are 11 replies in this Thread which was already clicked 2,808 times. The last Post () by steve67474.
-
my card updates ok in pc server using Ubuntu with smargo
-
you need to set an fline (do your own) like this to get updates to your card
F: user pass 2 1 0 { 0:0:2 }
-
Easiest way is set a user account for ur main box as standard,
Add the line into user account
Au=sly_uk
All other accounts add
Au=0
Then just add n-line into your main box (as your config setup is newcamd)
The entitlements will update no probs! - works for me!
If u have 2 cards use 2 separate accounts in 2 boxes , or a person u trust with an n line for the second!
-
hello,
a try to help
in oscam.server on you server running your s** card, you have :
QuoteDisplay More[reader]
label = sly_uk
protocol = mouse
device = /dev/ttyUSB0
caid = 0963
ident = 0963:000000 # not sure but i think its missing in your config
boxid = xxxxxxxx
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101and in oscam.user :
QuoteDisplay More[account]
user = main_dreambox_account
#description = for local mgcamd or DVBAPI
pwd = xxxxxxxxx
disabled = 0
uniq = 1
group = 1
au= sly_uk # has to be exactly the same as the label reader
caid = 0963
ident = 0963:000000 # not sure but i think its missing in your configthen you switch on some channel on s** uk on your main dreambox and see what happens... (maybe you have to watch a specific channel to get the update ?)
you should see if there is an update in oscam webif (in READERS part, EMM written UK / G / S / UQ)
-
steve you accounts look fine , once they are in make sure your boxes are running cccam 2.1.3 (no others work properly) add an n-line to your cccam.cfg file and updates will deffo come through:
Nline would be :
N: ip-address port-no user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Your box will then report hop 0 and your box will be tricked into being a local card
Also the au=sly_uk must match the label=sly_uk in the config file so it knows that that user can update!
Note : add cccam on a different port in config of your debian to share your card to other peers NOT N. Lines! (also needs adding in router port forward)
Eg :
[cccam]
port=10002 # can be anything you choose , edit as required)
version=2.1.4
cccreshare=1This will allow any user you give a c-line to to connect to your debian with 1 reshare
or you can omit cccreshare line and add cccreshare line into each user account to control different users reshare options
FINALLY : i dont have the ident line in my server but my caid is caid = 0963:000000 in reader section
Hope that helps , dont forget card only updates entitlements around same time each month so dont panic too much!
-
master G
Set the Label from UK OSCam to Videoguard2 Cards OSCam
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
