is this for dm500 clone thanks
Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup
-
- DM500 Images
- master G
- Closed
- Thread is marked as Resolved.
-
-
-
one quick question i use pli image and share with other servers to receive there cards like *** italy and *** germany do i just add this image and keep the same details that i have already in my cfg file and transfer them to the new image or must i do something with the oscam files thank-you
-
Keep your current cccam.cfg adding the nline from this one to it, also disable any lines in your own cfg relating to the card reader ( dev/sci0 )
-
ok got the part about about keep cfg file ok and disabling the dev/scoi so do i make an n-line in the cfg file to connect to the oscam do you have an example thankz for the help
-
ok got the part about about keep cfg file ok and disabling the dev/scoi so do i make an n-line in the cfg file to connect to the oscam do you have an example thankz for the help
Just add this to your cccam.cfg and you should be running.
-
ok mate thankz for your help my port in the cfg file is 18000 so i make my n-line like this is this correct N: 127.0.0.1 18000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
-
No the newcamdd port is set to 10001 in the configs so enter
N: 127.0.0.1 10001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 -
With this image has anyone overclocked white sly uk card safe enough? If so wot speed is used?
-
Which version of Oscam does this image run?
-
Which version of Oscam does this image run?
Oscam 4863 -
If I was to change to a later version do I use the new or the old PPC file?
-
-
Hi all another noob here, installed fine but when im setting the ip of the box it keeps failing the test. Nameserver and Gateway are green, ip and netmask are red? Also what is the default Web Interface Port.
-
Hi all another noob here, installed fine but when im setting the ip of the box it keeps failing the test. Nameserver and Gateway are green, ip and netmask are red? Also what is the default Web Interface Port.
mine did the same mate but works fine
-
Hi all another noob here, installed fine but when im setting the ip of the box it keeps failing the test. Nameserver and Gateway are green, ip and netmask are red? Also what is the default Web Interface Port.
when just flashed
Oscam 8888
CCcam 16001If you are having network problems try enabling dhcp it should auto assign the required values.
-
Just installed this image but when i go into var/etc I dont have a cccam file.
Am I going in the wrong place?
Thanks.
-
Just installed this image but when i go into var/etc I dont have a cccam file.
Am I going in the wrong place?
Thanks.
Your looking in the right place maybe just not looking hard enough, it definatley is there.
-
I reflashed it and it found it.
Think it must have corrupted as it was flashing across.
Thanks anyhow!
-
i flashed the dreambox with this image i then copied what fhat clines and flines i had saved from my cccam and put them into the new cfg file in this image i then added this n-line to the cfg file N: 127.0.0.1 10001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 and put the card in and restarted i then went to the web log in page of oscam it see,s the card ok but no servers or friends what am i doing wrong do i need to open another port on the router or do i need to do anything in the oscam files to be able to see my friends any help is much appreciated
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!