eeh the 5.0.6 for the wetek is not yet out
[TUTORIAL] Configuring TVHeadend For 28.2e
-
- Article
- jim1985
- Thread is marked as Resolved.
-
-
But the version from Openelec is and I am sure it will be available soon. In the meantime I will remake the sd card install and try again. Does it matter which LNB I use?
-
i wil make a backup version you need only install it and all back thing will works
-
I appreciate your kind offer but if it is not possible to follow a good tutorial like yours or Jims then there is something wrong with the wetek box. Not everyone is having this problem or reporting problems so this is my problem. I will try to do it myself and if not good then I will try with your backup. We have already had a problem with installing tvheadend and then discovered that their servers were down. That is not wetek's problem but they should make allowances for it. Thank you again for your help, wetek also owe you their thanks.
-
you can test if it works and look in tvheadend and so
i bussy with it laters is for other ppl too :)
-
So I did a complete reset and installed everything again. My Satellite box logic tells me to connect my dish to the lowest lnb number (1) and as this is a 2 input tuner it should not make any difference. But it seemed sensible to try so I connected it to Lnb 2 and now everything is working as per Jims tutorial and snifferdsx. So thank you all again. Does this mean that I have a faulty tuner (ie one of the two is not working) or does it mean that Lnb 2 is the default when using only one dish connection?
-
the outside tuner is tuner 2 the other check if you have enable it
-
i take it i have to manually move radio channels to a radio bouquet as not done by tvheadend on 28.2
also on channel tag section does sort index mean bouquet order preference ? -
This is a good guide i was lost for a few steps without this , was just like when I started with e2 a wee bit learning worse in the late 40's ,only issue is ecm time on the wetek seem to go from 100ms to 900 ms at times but ill make it a client and drop the omnikey , Thanks Jim
-
Found this one
-
i take it i have to manually move radio channels to a radio bouquet as not done by tvheadend on 28.2
also on channel tag section does sort index mean bouquet order preference ?To get TVHeadend to map the Radio channels automatically, when you are on the Bouquets screen, put a tick in the 'Map Radio' check box for your selected bouquet region
(Click Image for larger version)
33b62a98d0548407e6e.jpgAs for the sort index. I'm not sure to be honest. I thought the same as you but it doesn't seem to work for me
-
Its Sunday Jim and I am in no hurry. I did as you ask and even though I had already tried to 'Force Scan' before I still could not get and response. I notice also that there is no data (other than 0) showing for the network name.
Look here also buddy between the 2 guides youll make a better understanding of it
-
had trouble myself with tvheadend but i followed jims tutorial and all working great now
well done to jim
good luck time and patience is needed but you will get there in the end -
I had a similar problem, try this: On the TV adapters tab on the left, click on one level HIGHER up in the tree than the lowest level - here there is an "ENABLE" radio box that must be selected.
-
ok guy you got nobhead here how do you access tvheadend web interface
-
ok guy you got nobhead here how do you access tvheadend web interface
via a browser at address: IPADDRESSOFYOURBOX:9981
-
do you need a proggy to log into box tried won't connect 127.0.0.1:9981
thanks.
-
no you need ip of wetek 192.168.whatever.whatever:9981
-
Sorry bit dumb of me figured it out , guess i was rushing similar to dreambox , thanks, was wanting to ask though how to load 1 of the backup files to wetek box tried putting it on usb ,openelec menu then restore backup, it just comes up blank, appreciate some help here, thanks
-
got as far as selecting my bouquets region 14 757 channels.
but then when clicking on channels for sorting under name i'm getting (name-not-set) and under tags by double clicking i get either SDTV or blank.
what am i doing wrong?
regards: canthackit
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!