C lines and f lines

There are 11 replies in this Thread which was already clicked 3,015 times. The last Post () by cazuela.

    Hi,i am sharing my card,this is the C line i give C: ip-address 13000 username password and F line F: username password 2 0 0 { 0:0:2 }. is this ok cos i want to get the best reshare for mine.thanks

    The 2 in the first bit of the line means you give your local card and 2 hops set this to 0 and your peer will get local card only


    In the second part of the Line 2 means your peer gets to use your card an can reshare it on to 1 hop above them


    I use 0 0 0 { 0:0:2 } keeps server fast!

    I use 0 0 0 { 0:0:2 } keeps server fast!
    it certainly does,,,but then if you dont have a strong/popular package or platform,,
    then imagine how many peers you would need to have a "full/all-round" server... imagine to have 37 platforms you would need to find at least 37 peers with "fullcards"..... hard if not impossible,then for those 37 "fullcards" to be on 24/7,356 per anumm...so to back it up ,you´d be looking for more peers... on the other hand ,,the more hops you share the more likely that you will be sharing a "common" peer that the other 2 already have..( don´t know if that makes any sense to you) for example if A shares with B and A+B share with C ,then A will be recieving C´s card from B in hop1 translating into hop2..
    ............ so the norm is to set it at 2 0 0 { 0:0:2 } especially if it is a pc server bacause it can take it....or a "weaker card" .that relies on resharing of others´cards.

    Hi,if i have just friends sharing my card and they have nothing to share back is the F line i set is F: username password 1 0 0 { 0:0:1 }.is this ok only if i share with others i should set it to 2 0 0 { 0:0:2 }.

    Quote from Ten Below

    If they do not share back and watch only your local then make it 0 0 0 { 0:0:1 }
    Why share if you get nothing back though?


    Hello I am new to the drembox 500 and can you explain where I can find to test the saddles C_line drembox

    Hello,these friends will share something back in time,i am just trying to work out the best way to share and understand the C AND F LINES.everbody has different ways of setting these lines just want to know what is best.thank you,any other options would help.

    Quote from cazuela

    I use 0 0 0 { 0:0:2 } keeps server fast!
    it certainly does,,,but then if you dont have a strong/popular package or platform,,
    then imagine how many peers you would need to have a "full/all-round" server... imagine to have 37 platforms you would need to find at least 37 peers with "fullcards"..... hard if not impossible,then for those 37 "fullcards" to be on 24/7,356 per anumm...so to back it up ,you´d be looking for more peers... on the other hand ,,the more hops you share the more likely that you will be sharing a "common" peer that the other 2 already have..( don´t know if that makes any sense to you) for example if A shares with B and A+B share with C ,then A will be recieving C´s card from B in hop1 translating into hop2..



    ............ so the norm is to set it at 2 0 0 { 0:0:2 } especially if it is a pc server bacause it can take it....or a "weaker card" .that relies on resharing of others´cards.


    thanx for explanation, starting to see things a bit clearer

Your support forum for satellite viewing cards and subscriptions.

Get help with activation, troubleshooting, and compatibility for all major TV packages. Official support for satellite TV subscriptions. Find help for viewing cards, package activation, and troubleshooting your pay-TV service.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login