The dtv player is no longer responding to the adb tool, when I put I.P in it no longer says this is dangerous it says "adb is not reconized as an internal or external command,operable program or batch file" and if I enter 6 it says done but repeats the above phrase and the same when I enter 5 then 4 and nothing happens. Box does not reboot or responds to adb.
mars dtv has stopped
- hrhbig
- Thread is marked as Resolved.
-
-
make sure double click "database.bat" file in adb tool .
then enter box ip in it.
before doing this make sure box is connected to internet. -
hi, thanks for the pm but before we go down that route;
By deleting adb then re downloading, adb is back to normal but after doing the 6,5,4 it reboots but doesn't clear the dvplayer not working so can I check that I'm using the right upgrade? Thanks for your help Melv. -
I know you have also checked IP of the box but have you got dhcp working on it ??
It just might be changing ip, hence not connecting and fulfilling the command -
it seems that adb tool is not resetting this file /sdcard/dtv_tmp" .
can you right click on database.bat file then click edit file will open in notepad , copy all data and paste it here. -
echo off
ECHO.
SET /p var=please input the box ip:
ECHO.
ECHO connecting...
ECHO.
adb kill-server
adb connect %var%
ECHO.
adb remount:Start
ECHO -------------------------------------------------------------------------------
ECHO -
ECHO - Warning The following is dangerous, please use caution, bear the consequences of their own!
ECHO -
ECHO - 1. get database from box to pc.
ECHO -
ECHO - 2. send database from pc to box.
ECHO -
ECHO - 3. Exit.
ECHO -
ECHO - 4. Reboot the box.
ECHO -
ECHO - 5. Reset dtv setting.
ECHO -
ECHO - 6. Clean ts on sdcard.
ECHO -
ECHO - 7. push neodroid
ECHO -------------------------------------------------------------------------------
ECHO.
SET /p op=Please enter the number required for the operation (type commands followed by enter.):
ECHO.
IF "%op%"=="1" GOTO GetOperater
IF "%op%"=="2" GOTO PutOperater
IF "%op%"=="4" GOTO REBOOT
IF "%op%"=="3" GOTO Exit
IF "%op%"=="5" GOTO RESET
IF "%op%"=="6" GOTO CleanTsOnSdcard
IF "%op%"=="7" GOTO Pushneodroid
GOTO End:REBOOT
adb shell reboot
GOTO End:GetOperater
adb pull /sdcard/dtv/dtv_setting.ini database
adb pull /sdcard/dtv/pm.db databaseGOTO End
:PutOperater
adb push database/dtv_setting.ini /sdcard/dtv
adb push database/pm.db /sdcard/dtvGOTO End
:Reset
adb shell "rm -rf /sdcard/dtv"
adb shell "rm -rf /sdcard/dtv_tmp"GOTO End
:CleanTsOnSdcard
adb shell "rm -rf /sdcard/*.ts"
adb shell "rm -rf /sdcard/*.ts.idx"
GOTO End:Pushneodroid
adb push neodroid /sdcard/neodroid/roms
GOTO End:End
ECHO.
ECHO - Has completed the number for %op% operation.
ECHO.
PAUSE
CLS
GOTO Start:Exit
EXIT -
replace data with this and try.
echo off
ECHO.
SET /p var=please input the box ip:
ECHO.
ECHO connecting...
ECHO.
adb kill-server
adb connect %var%
ECHO.
adb remount:Start
ECHO -------------------------------------------------------------------------------
ECHO -
ECHO - Warning The following is dangerous, please use caution, bear the consequences of their own!
ECHO -
ECHO - 1. get database from box to pc.
ECHO -
ECHO - 2. send database from pc to box.
ECHO -
ECHO - 3. Exit.
ECHO -
ECHO - 4. Reboot the box.
ECHO -
ECHO - 5. Reset dtv setting.
ECHO -
ECHO - 6. Clean ts on sdcard.
ECHO -
ECHO - 7. push neodroid
ECHO -------------------------------------------------------------------------------
ECHO.
SET /p op=Please enter the number required for the operation (type commands followed by enter.):
ECHO.
IF "%op%"=="1" GOTO GetOperater
IF "%op%"=="2" GOTO PutOperater
IF "%op%"=="4" GOTO REBOOT
IF "%op%"=="3" GOTO Exit
IF "%op%"=="5" GOTO RESET
IF "%op%"=="6" GOTO CleanTsOnSdcard
IF "%op%"=="7" GOTO Pushneodroid
GOTO End:REBOOT
adb shell reboot
GOTO End:GetOperater
adb pull /sdcard/dtv/dtv_setting.ini database
adb pull /sdcard/dtv/pm.db databaseGOTO End
:PutOperater
adb push database/dtv_setting.ini /sdcard/dtv
adb push database/pm.db /sdcard/dtvGOTO End
:Reset
adb shell "rm -rf /sdcard/dtv"
GOTO End:CleanTsOnSdcard
adb shell "rm -rf /sdcard/*.ts"
adb shell "rm -rf /sdcard/*.ts.idx"
GOTO End:Pushneodroid
adb push neodroid /sdcard/neodroid/roms
GOTO End:End
ECHO.
ECHO - Has completed the number for %op% operation.
ECHO.
PAUSE
CLS
GOTO Start:Exit
EXIT -
Hi, I have done as you suggested but it has made no difference. It doesn't seem to allow to update?
-
what do you mean by it "It doesn't seem to allow to update? ". what message you are receiving ?
did you swaped the old data inside database.bat file and saved it ?
i attached 2 database file one of them should work for you. -
Yes I did that.
In the tut it said make sure you have the latest upgrade so I tried to update but it never seems to fully do this and boots half way through.
What to I do with database file do I add to adb tool? -
Yes I did that.
In the tut it said make sure you have the latest upgrade so I tried to update but it never seems to fully do this and boots half way through.
What to I do with database file do I add to adb tool?Ok, let's start from begining. Now we are going to upgarde box software
1: Delete all update.zip files from your computer's download folder.
2: Download latest Mars DVBs2 software here and upload it into box. http://linuxsat-support.com/re…ware-downloads/update.zip
Follow how to upgrade guide : http://linuxsat-support.com/showthread.php?t=81179
After successfully uploaded software to box . come back here with the outcome.
Important : update.zip and update(1).zip is not equal. Box recognised update.zip -
a8c31c4e686cdba16ba4.jpg
I have done that and I get this, when I stop the flashing it finishes loading the rest of icon (kodi etc) then I reconnect wi fi then on p.c click adb tool,d/b batchfile enter 6,5,4 and it reboots and goes back to pic.
Thanks again for you patient help.- - - Updated - - -
81157a111e3.jpg
When I use databases that you added I get this. -
Can you confirm that (update.zip) "software upgraded successfully" ?
Did you checked that you are entering correct wifi ip address . If wifi ip not works then use a ethernet cable .
Which windows version you are using?-----update-------
if windows installed version is 10 then try it with older windows . -
No to "software upgraded successfully" That seems to be the problem it reboots a fraction before the end of loading.
I've tried switching on while holding menu button and via settings upgrade.
I am using windows 10 but abd worked before.
cheers melv. -
I experienced this "software upgrading" issue with windows 10 .
Try to download latest software in older version of windows like win7 then try to upgrade box software. -
Sorry no luck yet- I've tried with Vista and w7, I tried both ways in both usb ports and I've tried using different usb sticks in case stick was corrupt but still unable to achieve "software upgraded successfully".
Cheers melv -
i can't guess why adb tool not working for you but works for others users.
their is one more option to reset box. android settings => backup and reset=>factory data reset=>reset tablet
still i have a doubt that their is a step missing in upgrading software and resetting box via adb tool.
if you want teamviewer support to figure it out pm me. -
hi, I download update I don't unzip just send it usb stick I upgrade box but it doesn't get to "software upgraded successfully", I redo wi fi enter i.p 6 enter,5 enter,4 enter it reboots but doesn't solve poblem. I've tried fatory reset but no improvement. I think I need to find a way to get the update to fully load?
Can I take you up on the teamviewer option next week as I will now be away or a week?
Thanks for all your help.
Cheers Melv. -
anytime you are welcome on forum.
-
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!