Posts by master G

Install all the ipk files you have been given, doesnt matter which order. If the epg is set to update to your usb drive, then removing it will wipe your settings. You can save your epg to internal memory, but its best to keep that free for other plugins you may want to use. Best just plug the usb drive into the back of the receiver and forget about it. Setup a swapfile and put some picons on it.

09:08:11: Update v0.5.2
- From now supports the sending of messages from other plugins

Quote from anfieldoreill

Do I do that through the box or through FTP ?

Sorry download the file then ftp it to the box replacing the current one, it should be in /var/ect.
Also add a good multisat channel list such as Catseye E1 Settings File

Quote from Jeffzapp

Hi Ten Below.

I understand where all the files go. I am trying to add cards. I can make them run on there own but when I try to run them all together I can only get 1 to connect. When I look on web info only 1 N line is connecting so it's only seeing 1 card. It's very frustraiting as all the pre set Oscam configs are for D/boxs I assume and not Ubuntu. So configs have to be changed I.E protocol, detect, devise to name a few. I will keep pluging away anyway.

Regards

Did you change the groups as Master G pointed out,

[reader]
label = s*yuk
protocol = smartreader
detect = mouse
device = 002:003
emmcache = 1,3,2
caid = 0963
services = Variety Pack,Knowledge Pack,Style & Culture Pack,News & Event Pack,Children's Pack,Music Pack,Movies Pack,Sports Pack,FreeSAT
boxid = ********
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1

----------------------------------------------------------------------------
JSC Sports

[reader]
label = JSC
Protocol = smartreader
detect = mouse
device = 003:002
force_irdeto = 1
Group = 2
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
caid = 0603
ident = 0603:000000
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000

-----------------------------------------------------------------------------------
Tring

[reader]
label = Tring
Protocol = smartreader
detect = mouse
device = 002:002
Group = 3
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000

Oscam.user

[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1
au = s*yuk
caid = 0963
-------------------------------------------------------------------------
JSC Sports

[account]
user = test3
pwd = test4
group = 2
AU = JSC

----------------------------------------------------------------------------
Tring

[account]
user = test5
pwd = test6
group = 3
au = Tring

Your question has already been asked here

Help installing coolman tv guide on Vu+solo


If you do not have an ftp programme use dcc attached below. Once installed you may be interested in this as it brings up the cool epg guide on a single press of red button. Very wife friendly lol.

Multiquick button modified for D.E blackhole images

Any problems along the way just ask.

It should run ok this way pirate, with oscam only running you should be able to enter the nline into your server as follows.

N: IPOFDM500 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Hi Jeffzapp, the 3 files oscam conf, user & server all go in the same folder.
/usr/local/etc in Ubuntu.

Update your sat.xml file & reboot you should then be able to add the missing sats.
What was the problem with it not turning ?

edit: sorry just read your other post.

Quote from newtolinux

Actually version 2.0.11 is the most stable under linux 64 bit Operating systems . In most/all other versions of cccam the user is plagued with kernel errors in the linux kernel which results in "stack smashing detected" Which basically translates to buffer overflow. You say about payservers scammers fakers but in all essence anyone can fake now with oscam. So i dont think this particular version should be labelled as so . The lastest CCcam after 2.1.3 or all from an unrealeased source so who knows what people are opening themselves up for. Not on the defensive but 2.0.11 for sure the most stable solution with 64bit linux .

regards

New2

Well maybe that is true but nobody mentioned 64 bit servers. a quick Google Search will show exactly why i am against this version. Below is an extract of a post from another board in 2009 explaining why sharing with this version is dangerous.

Quote

such a glum day for CCcam users. i'm not sure if most of you have gotten hold of this file, but i have obtained this file yesterday from a friend who got it from some chinese website. CCcam 2.0.11 was hacked to bypass the limitations of reshares. This could be used or exploited by peers, especially those running payservers wherein they will distribute your cards without your consent.

here's proof of this bypass. configured my first server not to give downhops to my 2nd server. 2 0 0 { 0:0:1 } with minimum downhops: 1 on the 2nd server's config. notice that there's even no card available for viewing normally from that server, take note also of the nodeID. regular config runs on CCcam 2.1.2
and here, take a look at the hacked CCcam 2.0.11 on my 2nd server, showing the first server as sharing my cards. i also noticed that ALL my peers suddenly had reshares, lol
and here's my dreambox, connected to the 2nd server, getting the ECM from the first server. you can see clearly that it is hop2, from a nodeID which is not supposed to give any reshare!

this is really a grave cause for concern. as of the moment, this hack works only for the x86 format of the file (suitable for linux pc boxes) and have not migrated to dreambox sets. but only time will tell and soon it will be migrated to that format too.
in line with this, i might ask all my peers to shift to the latest version of CCcam as released for safety purposes.

Ronman, for the record i do not think you are a payserver or scammer but i would advise against using this version for both the reason above & the fact that you will find it a lot harder to find people willing to exchange using it.

This is only my opinion though, it is of course up to you.

DTS audio does work on the latest BlackHole image, its possible the mkv file you are trying to play that has the problem and not the image itself.

Each card needs a separate group, so yours would be sly group 1, jsc group 2 and tring group 3. Change oscam server and oscam user to match this.
Also in oscam config you can do this;
Oscam.conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1







[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.8-192.168.0.254
# protocols




[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;34000@0603:000000;34001@0BAA:000000

Other than changing the groups for each card your configs look fine. If you need more help let us know buddy..

I`ve not tried the fix myself yet, but when i do i will post here if its working on blackhole Vu+.

I`m not that clued in on these tuners but heres something i found,

TBS Qbox S2 USB DVB-S2 TV Box

http://www.tbsdtv.com/english/product/QBoxS2.html

Depending on whether you have them stored on usb drive or internal use these paths;

/media/usb/picon_oled/

/usr/share/enigma2/picon_oled/

/media/cf/picon_oled/

Dont forget to change the permissions/chmod to 644

Copy skin_user.xml to /etc/enigma2/

Hi, try this instead MyTube fix for BlackHole & VTI images.

Look here for an example of how to configure more than one card.

Help setting up Al Jazeera Sports viaccess + HRT viaccess Oscam

I used this guide for installing an omnikey, worked a treat.

How to install Omnikey readers on Linux PC

Vix images are based on open pli, give this a go.

Cam pack for ViX Image

Have you tuned in your satellites

Setting up a DM800 none usals

Guide for setting up usals for DM800

Quote from insomniac2k

Hi guys, I'm trying to reflash my dm800hd clone, but when clicking flash nothing happens (I've waited over 15 minutes). Got the "Tuner A : (empty) nothing" and "Tuner B: (empty) nothing" in the Tuner configuration so I'm hoping re-flashing will do the trick. Currently got an open pli image, bl76d sim 2.01.

Try using a different browser, i always found internet explorer worked well where some others had problems.

Its not safe to use this card in another receiver at the moment, take a look at this thread Protect your s@y italia card !!!!!!