Ah - ok - i think i was getting mixed up with question number 1.....
Next question....obviously its working...scheming with my mate who i work with.....if it can service that many connections then if i share a couple out.....mother in law, mate at work....all they need in their cline is my gateway address and i set a route up on that to forward ports into my vu....is it as simple as that??
Yes that's pretty much it mate, open a port in the router and forward to vu and your good to go.
This tool covers everything you will need, it even has cccam line manager built in.
Yup - that works...this keeps getting better all the time - ive managed to get hold of my mates 7025 and upgrade the second stage bootloader and use one of the brand new images through barry allen....great!
I have a couple of general questions now (all regarding the same thing)
1. My vu is running as the ccam server - how much resource does it take to run it (is it heavy on the os or does it handle it without batting an eyelid?)
I know of people running cccam on a duo with 50 peers so resource is not really an issue here.
2. As all of this is happening on my local lan (all hardwired) how many receivers can i run internally? wife, 3 kids etc etc - id give anything not to watch the suite life of zack and cody in my sitting room!!
As many connections as your router allows for, You think zak & cody is bad my mrs insists on watching every single episode of come dine with me grrrrrrrrr.
3. ive read lots of posts with regards to people kind of tuning the settings (is this because most people share out through the router) is that the bottleneck - or is the bottleneck the cpu on the serving receiver??
Not sure what you are asking here,if you are looking for info on how to maximize your servers performance all the info you need is already here in the c/s & cccam sections.
Reilly that post from aamir11 was taken from here, its in the oscam configs for all packages section. That config you pointed out actually blocks all EMMs so you need to use this for updating entitlements HERE. Oscam is the card reader so you will have to add boxkey/boxid to oscam.server and remove it from CCcam. Or if you want to use Mgcamd to get updates use this config HERE.
You are using cccam & oscam together why do you want to give out nlines for the card you are sharing outside your own lan. my advice is if you want to share your card with the outside world stick to cccam there is no point running cccam if you are giving nlines to peers.
Is it premium channels only which wont clear ?
Try this buddy..
Can you give us a bit more info mate, operating system,program you are using foe ssh ect.
Each box has its own cfg, so in your main server box add.
F: DB7000 700pass
Then in the DB7000
C: ipofmainserver port DB7000 700pass
e.g 192.168.1.4
e.g 12000
I think this is what you mean.
lsusbTry creating the folder manually with these commands in putty.
mkdir /home/cccamchown "[COLOR='#FF0000']user-name[/COLOR]" /home/cccam/chmod 777 /home/cccamUsername should be cccam if you used the auto install otherwise use the name you chose during install.
Press blue then yellow to bring up system info, look at the ram in use, remove any unnecessarily plugins & add a swapfile if you dont already use one.
Manually Creating a Swapfile on VU+DUO/SOLO
You will need a seperate cfg file with a separate fline on your main server for every additional box.
F: test test 1 0 0 put in like this but work also like test test i think
I think you have misunderstood the original post here.
Many thanks. Ill post back tomorrow....can I put the command in without adding the card...or will it error...?
To see the card the reader path should be enough, there are others to improve performance, ecm time ect, but thats another thread.
This is my opinion only & bound to upset a few, but i do not think anyone should share a freeview card, this is based on people advertising a certain card to make their servers appear more attractive to potential peers but upon testing you soon discover 95% of ecm from their card is bad.
So my point is if you do share this card please state what it opens when looking for peers & most importantly use
CCcam SID Assign as otherwise a freeview card is bad news to any other who monitors their server.
Glad you got it sorted buddy, thread closed..
You may be in luck then, let us know if it works. Good luck..
Look HERE for the configs, you will need to edit oscam.server and change the protocol and device to match the omnikey.
Here are working configs for Canal Digital conax using Mgcamd + Oscam for updating entitlements.
The attached files have already been editted so FTP to the correct folders.
Oscam files can be found in folder;
/var/tuxbox/config (Enigma1)
/etc/tuxbox/config (Enigma2)
Mgcamd files can be found in folder;
/var/keys/
mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 127.0.0.1 34000 User1Username User1Password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcsoscam.conf
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log
[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 0
monlevel = 1
appendchaninfo = 0
[newcamd]
Port = 0B00:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1
[webif]
httpport = 8181
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0oscam.server
[reader]
label = Canal Digital
Protocol = internal
detect = CD
device = /dev/sci0
Group = 2
EMMCache = 1,3,2
CAID = 0B00
ident = 0B00:000000oscam.user
[account]
user = User1Username
pwd = User1Password
monlevel = 0
group = 2
au = Canal Digital
