Hi,
can i use dreamup to load this image..
The method above does not work fo me . I must be doing something wrong..
I get to the point where it says telnet and copy and paste command.. All looks ok but pressing run does not do anything. the image file is ftp ed into /temp where i have this backup.img plus 7 other files... boot.g, camd.socket, ecm.info, ecm0.info, hotplug.socket, iplog.lo and mmi.socket.....
Am i in the right place
Hi there,
Great work mate. well done..
Is there a way to rearange via control the order of the favorittes say move sport to position 1 ,movies to 2 etc
Thanks for testing on s11. I will add this as soon as sort my fav list and save first..
My wish list for this reciever would be to make it dreamboxedit compatible so editing via pc was simple
Untill someone makes a better editor/loader..
It would be good if drembox edit could be altered in one of the revisions to use this box..
Sorry if this is a stupid question but can this be used on s11...
A lot of posts indicate s9,s10 and s11 are the same or am i reading this wrong.
Currently i have C2HS2-11-10-10:0579CMT with no issues.
It looks like you have set the installation antenna sattelite quick seetings to ... set motor to diseq1.2 on all sattelites... Even though i have no diseq
in satellite list select or add sats u want
in anttena setup turn motor type to diseq.. im not sure about the diseq 1.0 options or diseq 1.1 options
as long as motor type is set to diseq1.2
than go to motor settings and than postion settings....
This now brings up the west east options and i assume the dish can be moved via remote..
I will not bother with this reiever as the main box connected to sat but leave in spare room..
At the moment i can use dm500s connected to satellite and for me this has advantage because at noight i can use laptop to login via web interface and move dish without going downstairs.. I cannot do this on the s11.. if there is a way please let me know...
I will have to stick with sd channels on main box for now ..
well done mate. i gave up with the editors that are supposed to be used with these boxes. They are useless..
So editing channels lists for me seems like sitting infront of the box using the remote to edit. Takes a bloody long time..
If you can use drembox edit to edit that would be great..
Thanks mate,
will take a look.
Anyone
Does this work with.. actuator type motorised dish
An update..
The lnb arrived today and now all channels work fine.
The s11 box shows figures around 73-74 % ie 3 red lights plus 3 yellow lights but picture is not breaking.
Does anyone get into the 3 greens on this box..
I hope it stays like this when it starts raining.
Hi,
I have an openbox s11 and would like to know if i can be use this to drive a motorise dish with an actuator setup..Not diseq
Currently i have vbox positioner, motorised dish with 36v 18inch posioner..
antenna setup has diseqc 1.0 and 1.1 and motor is off
any simple setup guide
ok deleted list and set box to factory default settings.. strangely this does not delete any config files. both c line and n line still there..
Added the same fav list from this forum as lfc4ever but some channels still low or no signal.. *** arts 1 freezing/not working but *** arts 2 is fine
I have ordered a quad inverto ultra so hopefully this fixes the problem . If not it must be the box
I have just tried at a friends house so different lnb and dish..
i rescanned but did not delete my orignal list....
More of the channels were clearing but still had a prblem with some but these may be the ones tuned at my house with my setup
I should have deleted all channels and done a complete rescan..
but for now i will delete and try a list form the forum
I have not loaded any channel list but manually scanned (blind scan) all the channels.. I could understand if channel has no signal at all but some channels are gliching so they are there but do not lock on completely.... This also applies to fta channels so c line does not seem to be a problem.. My lnb is very old quad..
What about the frequency setup. Where should it be ?
Strange thing is when i woke this morning and moved my dish to 28.2 east i have noticed my lnb frequency is set to universal(9750-10600).....
But i left it on 5750-5150 last night on 13 east..
Does this alter automatically depending on what sat you are pointing at or should it stay on what it is set at...?
I cannot see a way to save once set. I asume it sets as you exit the antenna setup menu
Hi,
I have just got an openbox s11..
Some channels on all sats are freezing but seem ok on the dm500s
I noticed the antenna setup shows frequency as 5750-5150 should this not be universal (9750-10600)
I have tried all the frequencies but only get signal on 5150 and 5750-5150
signal intensity 87 and quality 75
I get no signal on any other frequencies...
This is on 13 east.. I will have a go on 28.2 tommorrow
Is my lnb faulty...
Hi,
Thanks for replying
1. which image has preinstalled picons.. for *** uk only would be ok
2.where can i download 71x53 picons for manual installation
i had same problem. This is what worked for me
menu/network setup/MGCamd plug setup/mage config files/newcamd.list/add/..... add you info here
single account and fill in all details..
reeboot box
thanks to hooley and others on forum
Do the picons work on dm500s with these settings or does this only apply to enigma 2 boxes
Ok thanks.. we wait and see but looking at options in the menu i cant find it. No problem
At hooley
Mate thanks for your reply..
What i was trying to find out was wherether i can set a seperate password for the adult channels and a seperate one for the menu access..
The reason i asked was because i was given the box by a friend to fix. i tried to access the cccam information but the box was blocked via password.
The person that had sold him the box did not want him to know the password...
I cannt remember if adult channels were locked but i asume the pin is different to access menu and cccam information...And the pin for adult channel is seperate.
