Posts by cazuela

Quote

As the VU duo2 have a way better CPU, would that change anything?

Obviously the quicker the processing the quicker the result..

Quote

I have some freeze with CCCAM, and sometimes I take ages to load a channel,

This depends on your setup ,if its a LOCAL card or how many hops away, number of peers, which CAID, etc...

Quote

Also, I was wondering, is there a better protocol than CCCAM available from one of these box?

Which box as you mention two : Ruby and Duo2...
not sure about the ruby but you can load/set up just about every emulator onto a Duo2 ..
Also depends again on which card Caid you are viewing..

why would you want to do that bud??
why not just try a firmware upgrade or image upgrade...
or reflash with your last backup before you made any changes
Ive searched in vain for the plugin ..

Quote from master G

No issue with the link buddy, but this was posted earlier -> Wetek is offering a chance to win Wetek Core

And the other post/link is in the correct subforum....:good news:

Quote from satfan54

Hello.
DCC passwords do not work. root, vuplus. Is there a solution please.

POST#1 STATES : FTP Password: vuplus
If you are using DCC,,, check the DCC folder and you´ll see DCC.ini, rightmouse it to edit and you can edit it accordingly.
Exit DCC and full reboot the box..
Once restarted try DCC again..

Quote from tempo

hi information:the software stalker you can of clone mag 250?? :welcome:thank you

You mean somebody bothered to clone a rubbish box??? whatever next......
To answer your question , I´m sure it is as possible on the clone as the original..
make a backup of what you have already, if possible and why not just try it and find out...
then come back and let us know..

Prueba esta imagen ,es uno de los primer backups de robijay :[BKP]Black Hole 2.14 Vu+Zero by Robijay [Flash]
¿ estás seguro que es original y no un clone??
Igualmente ,puedes probar con otro USB pendrive, supongo que ya sabes que lo unico metido en el pendrive es la carpeta nombrada vuplus..

glad to hear it bud,,
thread now closed..

Send it back to the seller bud..

try a few different backups : Forum: Vu+ SOLO2 Backup Images
and let us know the outcome bud..
We are presuming this is an original box...

Quote from lareb2012

Did you fix the issue

he has answered at teh end of the line..

Quote

thankyou master G - installed enigma2-plugin-extensions-tspanel_7.5_all.ipk aok.

another experience: if you , at any time while the box was on, disconnected any part of the connection between LNB/motor/tuner hten it will look as a fault.
The usual tell tale sign is if the dish icon on the screen flickers non stop( meaning it hasnt found the sat).
Have you got a single or double cable coming from LNB occupying both tuners?

Sounds like we´re all coming to the same conclusion,,, walled-pole not plumb, motor not setup correctly and/or tuner set up not correctly..

Don´t know where you got your info from as it is clearly stated in CCcam.cfg ; #C, #N, #L, #G and #R lines are accepted:

# syntax for to add newcamd server connection
#
#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# example:
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# syntax for to add radegast server connection
#
#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# R: 127.0.0.1 678 0100 000080
# syntax for to add camd3 connection
#
#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# L: 127.0.0.1 567 dummy dummy 0100 000080
# syntax for add gbox connection
#
#G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>
#
# support optional limits just like C line (ignore shares more than 'uphops' away)
# { caid:id(:uphops), caid:id(:uphops), ... }
#
# example:
#
# G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500

Please read the site RULES ..

it would be a good idea to close the clines :

C: peersdns 12000 username password no { 0:0:2 }

and get rid of the useless or fake cards.
then make sure you have a PRIO list in /etc just under your .cfg
in the PRIO list :

P: good recent caids

I: bad caids

P = priority
I = Ignore
CCcam.prio -09.09.2015
Each scropt has its own job to do so putting a tail on the cline would clutter it up..

Ask your Nline "provider"....

Apart from the obvious and make 2 brand new lines for these 2 peers theres not much else...
BTW- how are ending the lines and spacings ??
C: myhost myport user pass no { 0:0:2 }{}{}peershost
F: user past 2 0 0 { 0:0:2 }# peerhost and/or username
or are you using more filters?

It depends on which card you want to share..
if its a skycard then theres a bit more to it and you need to install oscam is best..
you will also need to get your card paired to an old original sd box..
this is all on the site already bud, use the searchbar top right..

Can´t see how buddy, although saying that I´m using an ultra black quad and works a treat on fringed sats..

How old is the box bud??
is it an original?
the bad side if it´s the tuner which is not plug n play on the solo2 so maybe consider returning it to seller..
or if you're handy with electronics ,check the pins of the tuner to the board..

Knew you´d get there bud,,
will close this thread now ..

Quote from twotabs

hi cazuela im not sure what to do with the web address u sent im running latest vix openvix 3.2.10

- - - Updated - - -

hi cazuela im not sure what to do with the web address u sent im running latest vix openvix 3.2.10

OPen a webpage on your pc,,, type the IP of the duo2... for example : 192.168.0.10/lcd4linux/config/
and the page should open for you as long as you have it turned ON in the plugin