Posts by cazuela

  • Vu+ solo 2 help

    Tell you what ....
    Try this BlackHole 2.1.7 Vu+ Solo2 Full Backup image by mckee25
    in POST#1...
    Read carefully the contents and the FTP password is vuplus
    Steps to follow are exactly the same as you have flashed before....
    The difference is that most of it will be already set up for you..
    You´ll need to update the channel list ( use the catseye IPK I uploaded before ) All FTA should be available...
    And to watch P.P.V channels you´ll have to set up your own personal configuration for your card....
    let us know how you get on bud...

  • Vu+ solo 2 help

    FTP the catseye channel list for 28º IPK over to folder /var/volatile/tmp
    Then in TELNET write or copy this command:

    Code
    opkg install /tmp/*.ipk


    let it restart the box and then try using the remote onto an FTA channel.
    click on the highlighted titles
    Dummies guide for setting up your VU+
    Step by step tutorial on how to flash your VU+ Duo receiver with a USB stick.
    Dreambox control center
    Networking terms explained
    How to create a dyndns account VIDEO
    Where do i put the files in my box and what are they?
    Getting Started - Flines & Clines For Beginners
    Dreambox Control Center Latest Version For Enigma1 and Enigma2 Receivers
    CS Studio by Damirsat ( CCcam Info )
    and much more bud....you only got to use the searchbar top right corner..
    After trying things out and if still in doubt we are always here to help out somebodyu who wants to help themselves !!

  • Vu+ solo 2 help

    OK bud, this is a fresh image so you need to install or scan a channel list.
    Have you got a fixed dish or motorised?
    Have you got DCC installed on your PC ??
    Try and find the box IP and se if you can FTP or TELNET using DCC...

  • Vu+ solo 2 help

    first of all ,,TSpanel + vix arent so compatible..there are plenty of threads about it....
    When yuou are posting please me more informative...
    Exactly which backup have you tried?? Link to it please...
    a blackscreen can mean just about anything ,,for example no channel list or tuner set up for your personal use...
    If you have a channel list isntalled then put it onto an FTA ( free to air) channel..
    But you mentioned that theres no response from the RCU ( remote control) which is very strange ...
    Are you sure its deffo a SOLO2 image youve installed??
    you see ?? the more info you give the less questions we need to ask so we dont have to try guessing...
    Lastly is it 100% original genuine box?????
    Dont take this as criticism buddy....We are only here to help...

  • Vu+ solo 2 help

    Quote

    this one is corrupt - files are missing


    What made you think this bud??
    is it a genuine original box and not a clone??
    Flash a solo2 backup on and see if any problems persist...( only takes less than 10 minutes to carry this out)

  • Vu+ solo 2 help

    Maybe if you posted in the relevant forum for starters.....
    Recommendations???? Yove been registered since 2012,, surely you have been reading up in the past 3 years buddy!!!
    BH and OPENPLI for me all the way..
    Please take note of where your posts have been moved to :SUPPORT

  • Plug in that reboots system at set time

    Why not set up in Cron manager?
    In BH images -> blue- blue-> BH Cron Manager.
    Setup cron job
    If it´s not a BH image ( nobody but you knows what box,image version, etc you are using as you declined to add this most valuable info)
    Then use the searchbar top right using the keywords:

    Quote

    set up cron reboot systm

    or similar.

  • SWE TEAM v.5 IPTV READY 0E2.0 DM800SE V2 HD

    Quote from sonda303

    Where to find the CCcam.cfg file after instalation Cccam in this image?


    It´s usually found in /etc after you have rebooted the box after installation.
    check down the list and you should see it.
    BTW pressing the thanks button to the original poster would go a long way,
    not to mention this is your first post for over a year registered...
    :40_002:

  • enigma2-plugin-extensions-tspanel_7.5_all.zip

    Unrar the zip file so you are left with an IPK file.
    On blackhole images , using DCC (dreambox control centre) in left side window open var/volatile/tmp folder.
    From the right side window, FTP using the <= arrow the IPK over to the tmp folder.
    now using the remote control unit ( R.C.U ) press GREEN-YELLOW ->manually install IPK packages.
    It should test then install the IPK.
    Restart the box then look in plugins menu and you´ll see it there.

  • which mag iptv box to buy

    I wouldn´t recommend any mag simply as it heavily relies on IPTV portals for which you ultimately have to pay for...
    Yes , it is possible to load your own personal list but I strongly suggest you read previous threads of mag support forum..
    There are many alternatives.
    Read this thread as an example : XBMC

  • Xmbc

    Quote from aj007

    What is the best kit to use for XBMC


    Welcome to the community.
    XBMC doesn´t exist anymore bud..
    It´s now called KODI..
    As for best kit ,, theres no such thing..
    But if you check KODI out you´ll see that its compatible across most platforms; windows,linux,android ,etc...
    But as you have posted in the

    Code
    Which Satellite Receiver Would You Recommend ?


    If you have an Enigma2 sat box then theres a modified version for it called KODIDirekt but this doesn´t even come close to the full version..
    I use a MARS box (android) and a WETEK (android) which both have a sat tuner(wetek has 2) mostly for online streaming/IPTV
    and both work without any major hiccoughs.
    I also use Enigma2 boxes but mostly for SAT+IPTV..
    So I suggest you start reading previous threads about the same...
    Enjoy

  • having trouble in loading my cccam from usb on mars android

    the way I have it as CCcam client is following these steps:

    Code
    How to Mars OSCAM Web Interface Tool




    Find ip address from settings/ethernet
    Write ip address into browser 192.168.x.x:8888
    Default login details below change it after login.
    user: abcd
    passwd: 1234


    Through the oscam webif you can add a reader , save, test , job done..

  • Noob question

    read or bookmark all the threads I linked in post #3.
    They will be very handy for you as you are progressing.
    Good to hear youre making progress bud !!
    you should add your box and image version in your signature
    as we still dont know what you have..

  • Noob question

    Quote from Blackie42

    So I tried the instructions from this thread
    http://linuxsat-support.com/showthread.php?t=69653 but the box crashed.


    So I copied CCcam 2.3.0 & CCcam.cfg(+ addedline details at bottom) from right hand dialogue box in DCC to the etc directory. Is this correct?
    thanks again


    what do you mean by "copied CCcam 2.3.0 to /etc "??
    This is not correct..
    You should have followed master G´s post#8 to the letter.
    I had already given you all the highlighted threads in post#3....
    etc folder-> CCcam.cfg
    usr/bin -> CCcam
    usr/Camscript -> CCcam.sh
    usr/uninstall -> CCcam.del


    However
    best bet for all your needs is to install our Addons plugin enigma2-plugin-extensions-linuxsat-support-addons_1.2_mips32el.ipk
    From there you can download and it will auto install.
    how to : FTP the IPK over to var/volatile/tmp folder
    then on your remote control pressGREEN-YELLOW ->manually install Ipk packages.
    press OK-> you will see the ipk->press OK-> prompt: yes.
    Full restart of the box .
    look in plugins menu and you will see the Addons-> cams-blackhole 2.x.x -> your choice of cams.
    once restarted after downloading/installing the cam you then press BLUE and use the arrows <- or -> to find installed cam
    then OK to autostart the cam.
    you can also install channel lists ,etc from our Addons...

  • How to make a complete backup of my Vu solo ?

    Quote from bodiddly

    I don`t know about the vu solo,I have a Vu+ Duo2 with the Blackhole image and it`s really simple to do.In the main menu there is the option Backup Menu,open it and make sure the path to your usb stick is correct then it will do a complete backup of your box.Then just use an FTP programme to send it to your pc. Works perfect everytime. But as I said I don`t know about the solo,maybe it isn`t an option for your box.
    bo.


    All VU+s follow the same basics.. the only difference is whichever image installed whether it be vix, BH ,,etc.....
    Usually the FULL backup or Personal Backup is made media/HDD and media/USB ..
    it can take between 5-7 mins for the full backup.
    You can then FTP the folder named VUPLUS over to your PC if you wish.