i already answered clearly that the update takes place when an update is available and you did not notice it because it is something that the programmer knows. It can be By adding a word, sentence, chapter, point, etc. You see the results of the edit, not the edit. which is a line of the servers that carry and as long as it loads if the script works . The modification takes place to reach you the same servers that carry you continuously because addresses and the way download them are constantly changing
Posts by ahmed gazye
-
-
My friend / hooka9999
I want to know some information so that it can be answered
Where you install the copy on the internal or external flash
If the installation is on the external flash, what is the plugin used and the method of installation
How did you find out that the copy was installed in the correct way in order to boot it
Without data on the error or the error message, we cannot access error
Good luck
-
Dear Friend / amrsalah45
My friend, this is a remote control button It is not available on all devices in Truman devices not available
With alternative attachments With an extension ipk You can download it on flash and install it on the copy
or I have unzip the ipk file It can be downloaded to the version cross over to it from any copy on the external flash, add what you like, Choose the easiest one for you It is loaded into SystemPlugins
appears in the list system This will save you an alternative
The name of plugin
enigma2-plugin-systemplugins-setpasswd_2.0_all
-
After permission of our honorable supervisor master G
Go to my topic on the next link in the forum, it has a complete file Config and choose what you like from it
Topic link
A collection of the latest SoftCam & keys & Config_PowerVu for most emu
-
Dear Friend / abdulrois
According to the explanation above, you repeat the change process 3 times in a row For the first options1
Option 1.
Menu > Setup > Network > Password > Choose your password > Green (Save)(1)
(2)
Pressing TEXT will open the full keyboard
(3)
-
The best image you send to your device is raw image
This is the humble opinion of the BACKUP You can work with it if you are satisfied or not. This is your choice
The best image you send to your device is raw image
You can add what you want
depend on BACKUP made by others makes you lazy & Knowledge is limited
Chinese say
If you give me a fish I'll have one meal but if you teach me to fish I'll eat every day
It is best to learn how to make the BACKUP instead of search the BACKUP
if you learn make BACKUP will Benefit others and benefit yourself
and do what you want according to your possibilities of device and your potential for your favorite
You see it difficult because you did not start when you started, you will feel that it is easier than you expected
I am ready to help you if you need
Where do you want to install the raw version on the internal flash of the device or the external flash of the device?
install the raw version on internal flash of the device my topic on the following link
install the raw version on external flash of the device my topic on the following link
Or else You will remain Imprisoned inside cage Backup
-
Dear brothers . I do not own this device I have a Spark 7162 device, but this version is one of the best versions of Spark
devices.I think it should be like this on this device. I don’t know, but I brought the version for you who loves to try
Richter-Thomas> Administrator
One of the team members
Zgemma H7 TIPS, HowTo
7. November 2019
Open the front panel on the right of the box (there is the power button on the top left)
At the back is the ON OFF switch (white switch)
So switch on the power and press the power button at the front until Flash appears on the display
Flashing begins ... and takes about 3 minutes
----------------
Use USB stick for lashen, the folder "zgemma" must be on it and in the zgemma folder a folder "h7"
the image files are then in the h7 folder
---------------
How do you flash image via Telnet?
Start Telnet
Copy image files to tmp and call the command: ofgwrite -m2 / tmp
So number is partition, 2,3 or 4
ofgwrite -m2 / tmp
ofgwrite -m3 / tmp
ofgwrite -m4 / tmp
with neutrino you can also copy image to tmp, select menu serive update, local flashing and specify folder where files are eg tmp or usb stick - media / sda1 / zgemma / h7
-----------------------------------------------
If you have a serial connection, you can use console tool like putty to interrupt the start-up process as an example
Enter CTRL-C enter
Now Receiver stops and you can call up the respective boot partition, which is then only started once - nothing on files is changed
Source code
boot the first partiion:
boot emmcflash0.kernel1 'root = / dev / mmcblk0p3 rw rootwait h7_4.boxmode = 1'
second partition
boot emmcflash0.kernel2 'root = / dev / mmcblk0p5 rw rootwait h7_4.boxmode = 1'
third
boot emmcflash0.kernel3 'root = / dev / mmcblk0p7 rw rootwait h7_4.boxmode = 1'
fourth
boot emmcflash0.kernel4 'root = / dev / mmcblk0p9 rw rootwait h7_4.boxmode = 1'
Show all
Flash instructions:
Disconnect the box from the power supply -> power switch at the back to off
Disconnect all other devices from USB during the process
Plug the update stick into one of the two USB 2.0 ports (rear) (note: the blue USB 3.0 port did not work for me)
Open the front flap, press and hold the power button!
Mains switch at the back on
If the update stick is recognized correctly, the message "FLSH" appears on the display
now release the power button
the box now flashes automatically, takes about 2 minutes
then it reboots itself, the initial setup wizard appears
the update stick can now be removed> done
-
-
My friend / Worldcup
Thank God the problem was solved, bro.did you go back to working on the Spark system again?
Good luck
-
Dear Friends
his is how chang password from team site Clear change is done in 3 stages by options1
-
yes the plugin updates the freeserver script (freeserver.sh) when it start but If there is a change in servers if not, it will remain as is not every day there is a change But if there is a change in plugin issued a new version
restart the emu you uesd after completing the update by plugin the emu after restart will re-read the new servers
-
-
-
My friend / Worldcup
Has the information been reached and the problem has been resolved please reply so that something is unclear awaiting response
Good luck
-
-
My friend / Worldcup
please choose any topic for me with the Spark system and ask the question and I will answer, God willing
-
My friend / Worldcup
do you mean Spark system If so, the question is not located here Not for anything, but to make friends look up When searching
please choose any topic for me with the Spark system and ask the question and I will answer, God willing
-
my friends
a plugin converted the lines to
files Ncam server, OScam server, Gcam server extension etc / configand also you will find Ccam.cfg extension etc & usr / keys by all the servers
And erase the old lines
-
my friend / igius12
as soon as you open the plugin, it automatically updates the main script it is not a plugin it is a file Inside the plugin
-
my friends
The plugin works without problems, and the lines are converted
as soon as you open the plugin, it automatically updates the main script
The picture is from my device today as it shows the date and time
