Quote from ITACHI Habibe

good evening I have had a receiver for years it is still blocked on this image I have found someone to help me can you offer me a solution

for example a hardset or something to unlock it

I tried with WinSCP but I don't know its host or password so I can't choose this option as long as it doesn't start at all

Thank you very much and good evening

First, the your topic is in the wrong place. Your device is carrying the 7111 processor, not the 7162

See your device here

Thread

FULAN - Hardware : Spark STi 7111

FULAN - Hardware : Spark STi 7111

Hardware:Spark








Technische Spezifikationen dieser Baureihe:

• Main Processor: STi7111 @ 450MHz
• Nor flash: 1x 8MB
• Nand flash: 1x 512MB
• RAM: 2x 128MB DDR
• Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch Spark:U-Boot
• Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend
• Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A
• DiSEqC: 1.0, 1.1 1.2,

…

ahmed gazye

Apr 7th 2019

Error installing the wrong enigma version on your device, you should go back to the spark system on your device and erase the wrong version of the enigma and re-install the correct version

This is done via the following

Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on the channel buttons next to it until the word spark appears on the Ok wait a little while Boot appears and the device will run.

Then go to my forum topic on the following link to complete the steps

Thread

Explain Installing raw image Enigma2 or delete it or make a backup on the internal flash of Spark devices​

explain Installing raw image Enigma2 or delete it or make a backup on the internal flash of Spark devices




in Spark System

The most important plugin for the service of Enigma2 are installed
On Spark to erase Enigma2 & installed it & make a backup is.

WLToolv02 / plugin_e2upgrade.s

First /is WLToolv02
To clear the Enigma2 while you are on the spark System

The second / plugin_e2upgrade.s
To installed Enigma2 in internal flash or make a backup for it while you are on the spark System


If you do not have this…

ahmed gazye

Mar 23rd 2020

New openvision-e2-extralanguage-py2-7.7-r380-spark _usb.zip & tar.gz 09/09/2022

In the first post

New openvision-e2-extralanguage-py2-7.7-r380-spark 7162 _usb.zip & tar.gz 09/09/2022

In the first post

Quote from aa7590

Quote from ahmed gazye

Quote from aa7590

i need latest plugin for spark 2020 hd plus 7162 inclused latest oscam Gcam like that for spark mode and how to run Gcam in spark instep wise method thanks

Thread

Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017

Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017



This is an old version, but it contains a full & important plugins The most important of which is plugin_upgradeuboot.s Not available for many



use kingston or sandisk usb 4 or 8 GB



Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.




After unzip the attached file, transfer the file named plugin to the usb and place it in the device.


It will come to you with a message. Do…

ahmed gazye

Feb 27th 2020

give me the latest one 2022 plugin your given plugin i installed have n o Gcam try to post quick if possible

this the latest plugin

Spark System support has been discontinued since 2016

Thread

Latest Gcam Emu for sh4 spark

New version Gcam 2.0 r0 emu -SH4
Updates for PowerVu Crypto-System

-fix lockup on multidecode

-Fixes detecte reader and file-keys of constant.cw

-Fixed potential deadlock in powervu emm handling

-[powervu] Added support for various hash modes

-Fixes some bugs (Drecrypt ) and fix TNT







linuxsat-support.com/cms/attachment/115568/


gcam.conf.rar

ahmed gazye

Mar 6th 2019

Quote from aa7590

i need latest plugin for spark 2020 hd plus 7162 inclused latest oscam Gcam like that for spark mode and how to run Gcam in spark instep wise method thanks

Thread

Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017

Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017



This is an old version, but it contains a full & important plugins The most important of which is plugin_upgradeuboot.s Not available for many



use kingston or sandisk usb 4 or 8 GB



Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.




After unzip the attached file, transfer the file named plugin to the usb and place it in the device.


It will come to you with a message. Do…

ahmed gazye

Feb 27th 2020

Quote from gsarwar55

Anybody give in detail a tutorial that how too install an image having extension tar.gz with multiboot in spark 7162.

Thread

Explained how to install Enigma2 Image on the external flash by Plugin Image Manager in Devices Spark

Explained how to install Enigma2 Image on the external flash by Plugin Image Manager in Devices Spark




Firstly You Must be split the USB with the program CreateMini or others (To convert it to an external flash, Containing the 8 or more Partition to install 7 Copy or more in it )

You can split the USB 8GB to 8 Partition by program CreateMini into equal Partition as explained in the topic So that the Partition to install the Image is 1 GB (It is better that the size of the Partition is not less…

ahmed gazye

Jun 2nd 2019

Quote from ard925

please emu to add or remove server line

Post

RE: OSCam 11936 EMU 802 & icam & gx & sh4 & Linux-x86_64 & oscam-emu.patch

Thanks professor /MOHAMED_OS
oscam-svn11712-emu-r798

Changeset 11712

Code
(Code, 3 lines)






Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only




But modern versions must Installing through ipk extension
This has provided us with the extension ipk for our devices spark

Thanks professor /MOHAMED_OS


This version is suitable for Spark devices










Enjoy & Good luck

ahmed gazye

Sep 4th 2022

BPanther's Neutrino - v3.xx for spark 7111 02/09/2022

In the first post

Quote from aa7590

experts help how i connect my box to pc to tranfer new plugin to my box give the pc software and in stepwise method (NOTE IN SPARK MODE NOT FOR ENIGMA MODE OK)

IN SPARK MODE

use kingston or sandisk usb 4 or 8 GB

Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.

After unzip the plugin file, transfer the file named plugin to the usb and place it in the device.

It will come to you with a message. Do you want to update the plugins ? Press OK, and the device will upload it and then it will re start

Thanks professor /MOHAMED_OS

oscam-svn11712-emu-r798

Changeset 11712

Code

Author:    bust3d
Message:
    Correction for ICAM ECMs for NDS    Thanks @Miese.Ratte for the patch :)    https://board.streamboard.tv/forum/thread/48087-der-kleinste-patch-aller-zeiten-korrektur-f%C3%BCr-icam-ecms-f%C3%BCr-nds/

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

This has provided us with the extension ipk for our devices spark

Thanks professor /MOHAMED_OS

This version is suitable for Spark devices

Enjoy & Good luck

Quote from kraimov

Hi brother

I need your help my usb wifi Fritz AC 860 could not detected by the reciever , could you please give the right driver.

Waiting your answsers

Many thanks

True logic says it must be bought usb wifi

It is compatible & tested with your device and has definitions from the teams that support your device

Refer to my topic in the forum on the following link that may help you to know about the data of your usb Wireless

Thread

Most​ Drivers Wireless & kernel-module​ enigma2 system in Spark devices extension​ ipk​

ChipGenius_v4_19_0319 to definitions data of usb Wireless lan card & Most Drivers Wireless & kernel-module enigma2 system in Spark devices extension ipk





First of all, most important information you should be aware of is your data of usb Wireless lan card

I offer you a wonderful program that is easy and simple to identify this data

ChipGenius_v4_19_0319
All you do is connect usb Wireless lan card to the computer, open the program, and it shows you all the required dat








After you know the data of usb…

ahmed gazye

May 1st 2020

Quote from kraimov

Hi brother

I need your help my usb wifi Fritz AC 860 could not detected by the reciever , could you please give me the right driver.

Waiting your answsers

Many thanks

Display More

True logic says it must be bought usb wifi

It is compatible & tested with your device and has definitions from the teams that support your device Refer to my topic in the forum on the following link that may help you to know about the data of your usb Wireless

Thread

Most​ Drivers Wireless & kernel-module​ enigma2 system in Spark devices extension​ ipk​

ChipGenius_v4_19_0319 to definitions data of usb Wireless lan card & Most Drivers Wireless & kernel-module enigma2 system in Spark devices extension ipk





First of all, most important information you should be aware of is your data of usb Wireless lan card

I offer you a wonderful program that is easy and simple to identify this data

ChipGenius_v4_19_0319
All you do is connect usb Wireless lan card to the computer, open the program, and it shows you all the required dat








After you know the data of usb…

ahmed gazye

May 1st 2020

BPanther's Neutrino - v3.xx for spark 7111 28/8/2022

In the first post

New openvision-e2-extralanguage-py2-7.7-r377-spark _usb.zip & tar.gz 30/08/2022

In the first post

New openvision-e2-extralanguage-py2-7.7-r377-spark 7162 _usb.zip & tar.gz 30/08/2022

In the first post

Quote from ahmed gazye

Quote from mNet12

Mr Ahmed

I dont know how to modfide files by easy python dismiler .Would you like explean to me how to modfide by this easy bython.واكون لك من الشاكرين .

Wait for my topic but it needs steps supported by pictures as long as you did not understand it from the topic of the brother angel_heart

Although you asked me to explain the method of modification On the public and private forum, I promised & agree you and prepare the

subject with pictures to be clear to you and others, but you could not wait for me to complete the subject for you, And when I prepared the subject I found you wrote to my dear brother isah2, so he gave you the modification made Because he has the same your device.

In this way, you did not learn how to do the things you love or make the way easier for you.

In the end, this is your choice

Thread

Multiboot plugin for zgemma h9 twin & zgemma h9 combo (Py2&3)

My best multiboot plugin is NFR4XBoot
simple , fast and stable.
You can install 10 images
But if you do my trick you will install more than that without modifying anything.
First send the attached to their folders by DCC and restart.
Install the plugin on USB or SD card . And send all your images to /media/nfr4xboot/NFR4XBootUpload/
then begin to install images.
After installing 9 images like this

linuxsat-support.com/cms/attachment/166705/
Stop here and never make exit and choose options like this
…

isah2

Mar 5th 2021

Quote from mNet12

Mr Ahmed

I dont know how to modfide files by easy python dismiler .Would you like explean to me how to modfide by this easy bython.واكون لك من الشاكرين .

Wait for my topic but it needs steps supported by pictures as long as you did not understand it from the topic of the brother angel_heart

Quote from mNet12

Is it possobel to give me files sir

I do not own your device zegmmah , my device is Spark 7162. If you want to try the modification of Spark devices on your device under your responsibility, it is available in the topic referred to.

Thread

Modification for nfr4xboot 1.00 to install more than 10 images

Dear brothers and friends


This is the first topic I will do in this gigantic forum, which taught me a lot, especially older brother Ahmed Ghazi.


After working on great image NFR version 5.1 on the internal flash, which allows me to run more than one image on the external flash without installing problems, like the rest of versions 4.3, 5.3, 6.4 or 6.5 for my old device (Top Box 2 Toner 7162)
- note that version 5.1 does not have Wi-Fi I couldn't make the drivers to it
, but I prefer to use it…

angel_heart

Dec 26th 2020

Quote from mNet12

ok .How i can open easy python desmiler .i dont have linux could pleade explaine to me

pasted-from-clipboard.png

open easy python desmiler through windows

Take care of this modification for installation on usb

If you want to install on Micro-SD-Card Go back to the next topic in the forum

Thread

Script to partitionate the "micro-SD Card (sda)" and the NVMe Hard drive (sdd) for octagon sf8008 Supreme

New
For "Octagon sf8008 supreme and octagon Sf8008"

* Here is a relevant script for creating 50 slots on the sdd NVMe hard drive



First format your sdd NVMe hard drive with Multiboot FlashOnline V.7.1


then, execute first script to partitionate your sdd NVMe hard drive.


* Here is a relevant script for creating 50 slots on the usb3.0 - sdc NVMe hard drive

And if you use usb3.0 adapter to connect your sdc NVMe hard drive to SF8008 or SF8008 supreme



First format your sdc NVMe drive with Multiboot…

najdine

Aug 18th 2022

Quote from mNet12

My Dear Ahned

I am useing zgemmah h9combo.I tried several times its give me error

The same modification works on Spark devices without problems, see the steps in the topic again

openvision-e2-extralanguage-py2-7.6-r375-spark _usb.zip & tar.gz 22/08/2022

In the first post