Hello, I recently received my Smargo Card Reader. I originally used my DM500 as my card reader for my server. Yesterday I followed Tutorial to setup smargo:
http://linuxsat-support.com/li…l-smargo-smartreader.html
As of today I am in a right mess because I dont know what lines to remove from my config files and what lines to put in. I urgently need some help with this to get my server back up and running. From the Tutorial above, I got through it, my smargo is version 1.3 and is being recognised by the system when I run lsusb:
Quote
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
My problem is that I have a load of redundant garbage in my cccam.cfg and also in my Oscam files from using my DM500S as my card reader
Can someone please tell me how to do a clean setup so I can get my system back online asap.
Also, a lot of the Smargo & Ubuntu tutorials dont mention CCcam, is cccam not needed with Smargo/Ubuntu Setup? Any help will be greatly appreciated. Also I am using White SlyUK card..
Here is my config files:
<<<<cccam.cfg>>>>
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = myportnumber
httpuser = username
httppwd = password
httpallowed = 192.168.1.1-192.168.1.254
#httprefresh = 3
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@****:000000;
<<<<oscam.server>>>>
[reader]
label = SlyUK
protocol = smartreader/mouse
#device = /dev/ttyUSB0 smartreader+
device = 002:002
#if you use smartreader and device with a bus id, hash out detect as its not needed.
#detect = cd
cardmhz = 600
mhz = 600
#boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
#SERIAL READER : /dev/ttyUSB0 smartreader+
<<<<oscam.user>>>>
[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
<<<<cccam.cfg>>>>
SERVER LISTEN PORT : myportnumber
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY:
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
SERIAL READER : /dev/ttyUSB0 smartreader+
#N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#N: 192.168.1.?? 10001 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
##########INTERNAL LINES############
F: user password 3 0 0 { 0:0:2 } #Knock yourself out
##########EXTERNAL LINES############
F: user password
My OSCam Webif:
9f34905e5f54947.png
My OSCam Webif Errors:
B75C66C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5369 (i686-pc-linux)
B75C66C0 s version=1.00-unstable_svn, build #5369, system=i686-pc-linux, nice=-1
B75C66C0 s client max. idle=120 sec, debug level=0
B75C66C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
B75C66C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
B75C66C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
B75C66C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
B75C66C0 s signal handling initialized (type=sysv)
B75C66C0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
B75C66C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
B75C66C0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
B75C66C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
B75C66C0 s monitor: disabled
B75C66C0 s camd33: disabled
B75C66C0 s camd35: disabled
B75C66C0 s cs378x: disabled
B75C66C0 s newcamd: initialized (fd=6, port=10000, crypted)
B75C66C0 s CAID: 1F1F
B75C66C0 s provid #0: 000000
B75C66C0 s radegast: disabled
B75C66C0 s http thread started
B75C66C0 s creating thread for device 002:002
B7578B70 h HTTP Server listening on port myportnumber
B75C66C0 s loadbalancer: can't read from file /tmp/.oscam/stat
B75C66C0 s waiting for local card init
B756CB70 r reader thread started (thread=B756CB70, label=***uk, device=002:002, detect=cd, mhz=600, cardmhz=600)
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
B756CB70 r ERROR opening device 002:002
B756CB70 r Cannot open device: 002:002
Thanks guys