Display MoreIt is **intentionally** disabled by default as it can slow down older boxes or with really big EPG, etc.
One can re enable this via:
MENU-->Setup-->System-->Keyboard/RC-->Button Setup
and change
History button mode to "Show Menu" from default setting (Show Menu with service name only)
Fantastic! Thank you! I figured there was a setting somewhere!!
This is not problem of your image. The channel may not support or not send EPG. Install EPGImport plugin.
No, I have EPG for all channels. Shows fine in the Graphical EPG and Channel list. However, when I press the button to bring up my channel history, I get a list of the last several channels I have watched, but no EPG info for those channels. Other images show the program info, so was just asking if there is a way to have it happen in PurE2?
Is there a way to get the Channel History to show EPG info in PurE2? It just displays the channel name, no program info, which can be problematic if you don't remember which channel you were on! lol
As for Kodi with PurE2 v. 6.3 in Twin/Combo: it works just fine! Something you have done must be wrong, sorry...
Thanks for the info on both boxes. Exciting if there will be an update from Zgemma for the H7. I'll reflash the Combo this weekend with the latest 6.3 and try running Kodi before installing any other plugins. See if that fixes it. Thanks again.
Anybody have a problem with Kodi working on latest Pure2? I have 2 Zgemma’s, an H7S and an H9 Combo, and Kodi won’t load on Pure2 6.3 on either. Have done fresh flashes etc with no luck. It works on 6.2. I have friends running PurE2 6.3 on other boxes...Octagon, Amiko, etc...and Kodi seems to be fine.
Android shouldn't run from mSD, because there is an Android partition on internal flash... ;)
We'll see, I hope soon... :)
Anyone heard anything new about the Android partition and a potential O/S release?
Kodi only works on 6.2 series images
But the question is why? And can it be fixed?
Kodi not work zgemma h7s
vix 5.3, atv 6.3, pure2 6.3...
I'm also having issues with installing Kodi on the H7S. It installs but won't load in any image. Very odd. I can install it and load it on my Zgemma H9 Combo.
Thanks gorski, that’s the info I was looking for!
What is the path to the blue button to activate PiP? I hotkey that button for my Catchup plugin so would like to make the PiP path a long press.
I'd also be interested to know if something like this exists? Seems the hardware should be capable.
FTP timezone.xml to /etc/tuxbox
overwrite existing file
restart
Waiting for your response. If is ok we will update the source.
Perfect. That seems to have corrected the issue.
However, it has caused me to find another one! lol. It would appear that there are 3 different Eastern timezones:
(GMT-05:00) Eastern - IN (most areas) - works fine
(GMT-05:00) Eastern-ON,QC (most areas) - works fine
(GMT-05:00) Eastern Time (Us and Canada) - Is an hour behind, like it didn't update for Daylight Savings Time.
Anyways, that last issue is certainly not a big one. Heck, the existing issue that you just corrected wasn't a big issue! haha. I appreciate the effort though in getting it fixed, thanks!!
Ok, now i have the same problem on reboot, but only with value: (GMT-05:00) Eastern - IN (most areas)
Can you please set timezone to "(GMT-04:00) Santiago", until we investigate this. I think Santiago has the same clock as (GMT-05:00) Eastern - IN (most areas)!?
Alright, glad to see I am not crazy! haha.
I will make that change for now and look forward to the fix. Thank you so much for working through it!
I have confirmed this is happening on many different boxes using PurE2. I have tested now the H7, Octagon SF8008, Zgemma H9S and GigaBlue X2HD. All with the lost timezone after restart.
Can anyone help me figure this out?
Does it have to be USB flash or can Online flash do the trick?
/etc/enigma2/settings
open this file in some editor (ex. Notepad++)
check this config (value):
Codeconfig.timezone.val=(your time zone here)Check if this config exists when everything is ok.
And then recheck again, when you loose timezone.
Sorry, I've been busy and this wasn't bothering me because I had done a restart in a while. I checked the settings and it was set to this:
config.timezone.val=(GMT-05:00) Eastern - IN (most areas)
It was like that both before and after the restart even though the time on the clock, and timezone on the box, had changed to GMT+1 after the restart.
I ha e tried both NTP and transponder.
I use E-Chanelizer for creating custom bouquets, although not sure how it would impact timezones.
The issue isn’t a sync issue. The issue is that the Eastern timezone that I select gets reselected as a GMT+1 timezone upon reboot. I get the same issue with my Octagon SF8008 running latest PurE2 as well.
I have a small issue with PurE2 on my Zgemma H7S. For about a month or so now (I update image regularly), the image won't hold my timezone through a reboot of Enigma or a restart. I am in the Eastern timezone in Canada and don't have a dish or anything hooked up to the box, only IPTV. Whenever I do a reboot of any kind, the timezone automatically goes back to GMT+1 Amsterdam, Berlin, Bern, Rome, Vienna and I have to manually return it to Eastern.
I have other images on the box through Multiboot and this doesn't happen with other images. It started doing it right after I updated around Daylight Savings time here, so early March. If its something that can be remedied with a future update I would appreciate it.
Display MoreRedo PurE2 from scratch.
Do not install anything extra - check the time zones in Settings, then manually, the file...
If this is working - you have your answer. If after installing an extra plugin or a skin you have a problem - that's what not to do...
Cheerio!
Even though adding the missing timezones.xml file to etc/tuxbox has worked I think I will do this very thing to see if its an issue with the image or if some plugin I am installing is deleting that file. Thanks for your help.
