Posts by CCcam

I'm using Meoboot and are running BH 2.0.2 from Universe. But how come I have so little space left here?

root@bm750:~# df

Filesystem 1K-blocks Used Available Use% Mounted on
ubi0:rootfs 104708 101948 2760 97% /
/dev/sda1 156218896 104904524 51314372 67% /media/hdd
tmpfs 69244 356 68888 1% /var/volatile
udev 2048 96 1952 5% /dev
/dev/mtdblock2 2048 388 1660 19% /boot
tmpfs 69244 0 69244 0% /dev/shm
/dev/sdb1 4032044 43628 3988416 1% /universe
/dev/sdb2 3662772 395432 3267340 11% /media/usb
/dev/sdb1 4032044 43628 3988416 1% /etc
/dev/sdb1 4032044 43628 3988416 1% /var/lib/opkg
none 4032044 43628 3988416 1% /usr
root@bm750:~#

I need gsub in xxx.tgz2 compression for manual install. It won't accept my gsub.tar file. Do you know where to find? Google can't help me...

Is this based on a GP image or Nabilo?

Hi,
My friend has a server with small problems. He lives to far from me fora visit, so my question is: Can I remotely connect to his CCcam server with MY CCcamphpinfo, using his dns-addy? Any ports to be open in his router. I know I can reach his CCcam webif if he opens ports...

You're right, I hav'nt. I'll give it a go...Thx mate!

Sorry, not working with above settings on my Vu+ Duo BH 2.0.2 rev.A, running it from "Universe".

Quote from Ten Below

You need to flash this before the new image buddy.
duo cfe Rev 3.0

Done it.
Thx. To much soccer lately, no time for upgrading image yet....

Quote from andy ray

Try using an omnikey reader in your duo this should lower your ecm times have you also looked into using oscam dvapi only this should also lower your ecm times

Not an option...I just bought a Smargo....Using dvbapi does'nt change anything. Strange thing: my bedroom box (CCcam 2.14), shared from Vu+,opens at the same speed, zapping mayby even faster.

I just checked. Right now I have BH 1.6.6 version Oct 12 2011-vuplud_experimental in flash. Just to be sure. Can I install any BH 2.0.o-2.0.2 images without drivers issue?

I have ECM times around 0.345-0.395 on my Via 093E card, sitting in Smargo connectinhg via a hub, to my Vu+ Duo. Is this normal ECM times when using a hub? Can another image or some other settings lower the answering times on my card?

Oscam as a cardreader and newcamd/ CCcam as client.

Thx

Thx m8. What about smargo drivers, are the new ones incl. in the latest images? I'm using a smargo for my 093E card.

Hi all,
I've been abroad for more then a year. I have on old 1.7.? BH backup image. Can I flash the latest BH 2.0.2 image without any hazzles?:ops:Thx,

fogonero!
I tried your suggestion and I'm getting ok answers:

/usr/sbin/hald
/usr/sbin/pcscd

Still bad ecm times though...strange is that it does'nt matter how I set the reader settings, 357, 500 or 600 mgz. Thx for helping

Quote from cazuela

another option with BH is green-yellow and you´ll see the addons manager.. ;)

My first thought also, but NO. The skin that I manually installed via tmp, did'nt show up under addons manager "remove" option.

Quote from daniel2005

Why are you using ccam with oscamon the same machine, just activate the dvbapi in oscam conf and remove cccam on this machine. update of you card will most likely bettter happen with oscam alone

I'm new to Oscam and trying different combos to get the fastest ecm time. I have an Nds card, using a Smargo in a D-link hub, and getting "slow" ecm times. Between 350-400. I have a Conax card in my DM600 in my bedroom, sharing between them, and the Conax card open up a lot faster (on Vu+) even though it "travels through" Homeplugs etc, to my Vu+ in the livingroom. I think I should be able to get around 150-200 on my NDS card. It does'nt matter if I set 357, 500 or 600mhz in Oscam config.
I tried Oscam dvdapi, Camd 3.57 and CCcam. Any other ideas?
The hub is a few years old, but power supplied and using usb-2.0.

Quote from Ten Below

Use DCC, click tools then ipkg packages & you will see all that are installed.

Ten Below!
You're always fast on helping people. Thx a lot m8. I first checked DCC as you said. Did'nt find it. Then i noticed that there are two options, opkg (default) & ipkg. So.., you're answer is correct as usual. Thanks a million. This skin, HD glass 16 did'nt go well with latest Black Hole 1.6.6 image.
Another question...is there a danger of removing systemplugins that i don't use? Some people say that you should'nt add/remove to many things from the image, it makes it unstable....

I manually downloaded a skin that did'nt "fit" my new Black Hole image. It gives me "gsod" to often. I want to remove it. I know there's something with ipkg list and the remove specific ipkg addon. Can someone give me more clear instructions?

Thx,

Sorry, English is not my native.....

master G

You're so right. I can't have double cardreaders......Thx

Yes I have..thx. Working find now. Card is a bit slow in opening. Maybe I shall change the reader settings...?

Thx for your reply. My mistake...:ops: I had the card upside down. REMEBER: CHIP UP!!!

My working settings:

CCcam config.

N:127.0.0.1 10000 localuser oscamserver10000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000

Oscam:

[global]
serverip = 127.0.0.1
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cwlogdir = /var/log/oscam/cw.log
cachedelay = 120
nice = -1
maxlogsize = 500
preferlocalcards = 1
saveinithistory = 1

#[monitor]
port = 988
monlevel = 4
nocrypt = 127.0.0.1

[newcamd]
port = 10000@093E:000000
key = 0102030405060708091011121314

[cccam]
port = 15500
reshare = 1
forward_origin_card = 1
version = 2.1.3
updateinterval = 240
keepconnected = 1

[webif]
httpport = 3001
httpuser = root
httppwd = xxxxxxxxxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.150
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[reader]
label = Smargo
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
ident = 093E:000000
boxid = xxxxxxxx
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

[account]
user = localuser
pwd = oscamserver10000
group = 1
monlevel = 4
au = Smargo
caid = 093E
ident = 093E:000000

This is working settings for 093E card in Vu+ Duo with Black hole 1.6.6 image. Oscam 1.20 unstable 5985/ CCcam 2.13.

when I run dmesg I get this:

drivers/usb/serial/ftdi_sio.c: ftdi_tiocmget Could not get modem status of device - err: -19
drivers/usb/serial/ftdi_sio.c: ftdi_set_termios FAILED to set databits/stopbits/parity
drivers/usb/serial/ftdi_sio.c: ftdi_set_termios urb failed to set baudrate
drivers/usb/serial/ftdi_sio.c: urb failed to clear flow control
drivers/usb/serial/ftdi_sio.c: ftdi_tiocmget Could not get modem status of device - err: -19
drivers/usb/serial/ftdi_sio.c: error from flowcontrol urb
drive
rs/usb/serial/ftdi_sio.c: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
usb 1-2.2: USB disconnect, address 5
ftdi_sio 1-2.2:1.0: device disconnected
drivers/usb/serial/ftdi_sio.c: error from flowcontrol urb
drivers/usb/serial/ftdi_sio.c: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1

Smargo not working?