Posts by carrspaints

I have a Zgemma H9S which was running Pure2 version 6.5. I have just updated this to 7.3. All is working fine, but I cannot get the VPN to work. I installed Pure2 before, many times, and had no problems with VPN setup, but nothing I try now works. I have tried installing SurfShark as my VPN using VPN Manager (it won't connect) and then SurfShark Manager (it won't connect). Both were downloaded off the Pure2 feeds.

My Zgemma H9S network settings are via LAN, DHCP is not being used, Name Server settings are 1.1.1.1, 1.0.0.1, 8.8.8.8, 8.8.4.4. The network is connected.

SurfShark Manager (V1.0.9) settings are:

Username & Password are from Surfshark "manual setup" (Open VPN), not the username or password I use to log into SurfShark. So this is correct. My Surfshark account is still valid for until 2025.

OpenVPN Autostart: Yes or No, it makes zero difference in my ability to connect via VPN

IP Tables Activate: No

DNS: 1.1.1.1

Protocol: UDP

All of the country specific VPNs are listed. No matter which one I select, all I get is the wheel of death spinning for around 20 seconds, no connection and the "S" to the right of the country VPN remains red.

VPN Manager (V1.1.7) settings are:

All Config in one folder: Yes

Default DNS 1: 1.1.1.1

Open VPN Auto Start: (Yes or No, it makes no difference in being able to connect)

OpenVPN Resolv: Yes

Set Optional VPN DNS Server: No

Username & Password are the same as per Surfshark VPN. Very long alpha-numeric assigned under "Manual setup" (Open VPN)

All of the country specific VPNs are listed. No matter which one I select, all I get is the wheel of death spinning for around 20 seconds, no connection and the "PLANET/PADLOCK icon" to the right of the country VPN remains red. It doesn't turn green.

I have spent hours on this, I have read threads from Gorski and Dsayers, I have been through their instructions, step by step, many times. I have rebooted the box multiple times, uninstalled and reinstalled, rebooted again, many times.

If anyone can assist me in figuring this one out, I would be grateful. Fortunately I backed up my Pure2 v6.5 image, so if no joy, I will just go back to that. Thanks

This question has been asked many times across many forums, and yet no one seems to have an answer.

Will Pure2 version 7.3 work on a Zgemma H9S box? I cannot find any version for the H9S. I can only see versions for the H9S SE & H9.2H. Would any of these versions work?

I'd really appreciate an answer so owners of the Zgemma H9S can finally put this to bed. Thanks

I have serche the entire web, I can find no reference to Filmxy v3.0. That version doesn't appear in the Plugin downloads either.

You say you installed v3.0, could you cofirm where you got this from? As far as I am aware, Franc hasn't updated these FNC plugins for quite a while now?

Hi. Is anyone else having issues with FNC Plugins working? Vumoo, Yify, Plass & Lookmovie/LookSeries won't work. I have deleted & reinstalled but no joy. Streamlord still work though. Thanks

Thanks KiddaC. I tried following what you suggested, but no change. I eventually deleted what was in Timers -> Crons Timers and re-added the scraper and picker files. It is now working okay. Thanks,

Hi KiddaC. I have installed your Slyk R19, Onyx, Q with Top Picks on many boxes over the past few years. Just installed these on a new Zgemma h9.2h se running OpenATV 6.4 and Top Picks won't work. It shows the same menu screen and never changes. I followed you install instructions to the letter - have done it many time. But the Menu image remains the same. I've checked Timers -> Crons Timers and it seems correct. Autostart: Active. Current: Running. The date and hour scripts you provided are there. Any idea how I can get Top Picks to work from here? Thanks

I am sure others will be asking the same question soon. So to confirm, the Pure2 h9s se image will install on the h9.2h se and it runs perfectly in every way. All tuners are present (Sat/Cable/Terrestrial), FNC plugins work fine, it's all good. The only thing you will notice is when you go into "Information", it has the box I.D. as a H9S se, but all the functionality of this box operate as they should. The 16GB EMMC FLASH that this box comes with is also a bonus and seems a bit smoother than the other h9s box I have.

Thanks but that is where I have been looking. I cannot find any file that states H92H SE. Only H92H exists. So will the latter work on the SE box, or is there some other link for the SE version? Or is there no PURE2 version for the SE model? Thanks

Hi all. Just received a new Zgemma H92H SE. I have looked for the Pure2 build compatible with this vesrion of Zgemma, but the only one I can find on the Pur-E2.club site is for Zgemma H92H. Will that be compatible with the SE version? If not, does Pure2 have a version for the SE box and if so, where can I download that? Thanks

Hi all. I have had PlutoTV running fine on my Zgemma H9S box for some time through a VPN. However, about a week ago, this stopped working. When I go into Plugins and click on PlutoTV, I get this message:

"There is no data, it is possible PlutoTV is not available in your country"

I have tried uninstalling, rebooting, reinstalling (even with the most recent PlutoTV update), but the same message comes up. I have tried connecting to different countries via VPN (UK, USA, Brazil etc.) It will not connect via VPN. However, if I turn off my Surf Shark VPN, it works. Is anyone else having this problem of not being able to connect if using a VPN?

Thanks

Excellent, it works. To be clear for the Zemma H9S. Menu/Setup/System/ServiceApp. Then the change can be made. Thanks for sharing the fix!!

Never mind. After doing the exact same thing for over an hours, it just started flashing. No idea why it wouldn't prior, frustrating as heck.

I've installed Pure2 from scratch several times, but I must be having a brain freeze day. I downloaded the lastest PurE2-6.5-20211209_usb.zip for my ZGemma H92. I unzipped the folder, then copied that to USB. I inserted in the back of box, switched on box but it won't install content, front red light on Zgemma remains on. I tried renaming noforce to force, same problem, will not load new build. I know I've missed something obvious, can anyone point me in right direction? Thanks

I had to do a complete reinstall of Pure2 last night on my H9S. Even with the most up to date image, it will not work. Since the latest Pure2 image seems to allow Pluto TV player to function on other boxes, it seems this is more a Zgemma H9S issue.

Just had to do a fresh install of Pure2 on a Zgemma H9S. I had installed VPN Manager using Surshark on the previous build without issue, but I cannot get it to work now. I have followed all of the instructions provided by gorski, I have been over those instructions and everything there I have done, to the letter.

The problem is that whilst VPN Manager loads up fine, and all of the country VPNs are there, when I click on any, I get the red (not connected) planet/padlock. I have a good Ethernet connection, network shows LAN is connected, I added my surfsharf username/password to plugin.py (the manual settings one), rebooted - I cannot get any VPNs to connect. DNS are as follows: 1.1.1.1; 1.0.0.1; 8.8.8.8; 8.8.4.4.

I am at a loss having spent the past 5 hours trying to get this thing to work. If anyone has any suggestions, I'd welcome them. Thanks

Hi all, I have a Zgemma H9S running Pure2 v 6.5. I uninstalled EPG-Importer, rebooted and reinstalled its, rebooted again. When I click on the Plugins link, I get this message:

"Some plugins are not available:

Extensions/Openwebif (/usr/lib/python2,7/site-packages/cryptography/hazmat/bindings//_openssl.so:undefined symbol: EVP_PBE_scrypt, version OPENSSL_1_1_0"

The same message appears for MediaStream plugin. EPG-Importer is also affected by the same message and whilst I can open EPG, it won't download EPG data. It says importing, but is stuck on 0 events and won't download EPG data at all. Does anyone know how I can restore/repair the missing or corrupt files? I am assuming that this is what the problem is, but my knowledge on such matters is very limited.

I really am trying to avoid a fresh install, it took ages getting the box as I want it and it has worked brilliantly for over a year. It would be time consuming and just sad to have to start all over again. Thanks

I cannot get it to work with VOD. I have no idea what the problem is. I have tried different things, but the VODs will not play. Perhaps this to do with the Pure2 build. The Pluto TV plugin should just work, but ffor us with Zgemma and Pure2, it won't. Maybe someone will post later with some recommendations.

b

Unfortunately, it does not work on our setup. I have tried different regions, I use Surfsharf VPN and have tried different geographies there too, but nothing will play within the plugin itself. Have uninstalled, reinstalled, no difference. My settings are identical to tjose in the screen shot above. Perhaps a compatibility issue with the Pure2 build.

giopet, are you able to get video to play within the plugin? I cannot get any of the movies or anything to play unless the bouquets are saved, and then I can only view via bouquets. If I click on a film, for example "Cummunion", the screen then shows that it is ready to play, but it never does. Did you have to install an additional plugin, or did the installation of the PlutoTV plugin just work? Thanks