Posts by big kid

In that case open up Winrar and add them yourself mate, tbh this is the easiest part if your struggling with this you may have major problems with the rest of it.......

Highlight all the files in the picture then right click, add to archive select .zip then open the zip in SeteditDream.

I edited the locals in DreamboxEdit before I converted, Here's my tut on how to do it.......

http://linuxsat-support.com/op…ts-openbox.html#post43183

which file are you loading mate?

Both work fine here......

Here's a full guide I made on how to convert Enigma 2 channel lists for Openbox with all the tools needed.

Cheers.

just 28.2e at the moment when I get chance i'll do the multi.

I'm fine with that mate.

After a lot of faffin about I managed to convert SGTFlipFlops enigma 2 channel list for the openbox as it is what im used to using on my Dreamboxes so I thought i'd share it with you guy's.

Here's the full flash which is the hacked firmware by Anonymous if you flash that all you need to do is add your c-line and all the fav groups will be named for you if you use the TP_PROG.dbs you may need to name them yourself with the remote.

25 fav groups setup

Entertainment
Lifestyle & Culture
Movies
Sport
News
Documentries
Kids
Music
Shopping
Religious
International
Gaming & Dating
Specialist
Adult
Regional
FTA channels
*** anytime
*** hd channels
Sports Interactive
BBC interactive
*** information
Bonus channels
*** box office
Irish variations
Testing EPG

Just to add if you do the full flash it will lose your c-line so back it up first!

Enjoy.

UPDATED! includes *** sports F1 hd

Not working for me getting sintax errors all over the place......

Whats the username and password for using this?

Top man, tried both and they work perfect faster than pissing about with your browser and full screen too!! deffo best way to get linuxsat on the go! Cheers mate.:80:

Quote from master G

What ports do you have open ?

just the server listening ports

I do connect to friends servers over the internet but these are people i personally know and not peers i have found on forums etc.

I understand that and the image is very good, but as I say this is the only way I can see them getting in.

They totally changed my CCcam.cfg and put in 3 c lines and one f line that says f:END CONFIG to connect me to their server with hundreds of cards on which didn't even clear my channels, lucky I always backup my configs.

I do connect to servers over the internet but with people I know locally.

Is there anything in this image that could let people in to your box to steal your c lines? because I have had this happen to me today and I dont share with anyone over the internet so there is no way someone could get into my server and this is the only way I can think it has happend??

I'm looking for a uk cable x1 image for a dbox2 x1, with CCcam already installed, looking to try a cable card share out on the old thing.

Anyone know where I could get one, looked everywhere but all the image are either set up for *** or have the wrong emu's on eg mgmcam or evocam etc???

If not im gonna be looking to get my hands on a dm500c if anyone has an old one knocking about.:83:

Hi, is there anyway to hide the connected clients ip address in the Oscam webif or stop the status page showing connected clients all together?

running ubuntu 10.4 and putty to ssh into server, wont let me in at all and has been fine for over a month now?

Also using winscp for ftp but that wont connect now either but if i check cccam webif and oscam both still running fine, server working ok but cant log in to it.

for some reason my server will not let me log in remotley anymore? help!

I have installed oscam on my cccam server and edited the crontab accordingly to restart when ccccam does every night a t 4am but now it's not working at all??

Heres what my crontab file looks like.

sudo nano /etc/crontab
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.




SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin




# m h dom mon dow user  command
17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
#







17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --repo$
#







m h dom mon dow user  command
56 03 * * * root killall CCcam.x86
56 03 * * * root killall oscam
57 03 * * * root /var/script/configupdate.sh >> /var/cccamlog/configupdate.log
58 03 * * * root /var/script/keyupdater.sh
59 03 * * * root /usr/local/bin/CCcam.x86
59 03 * * * root /usr/local/bin/oscam -b
*/5 * * * * root /var/script/CCcamCheck.sh
*/5 * * * * root /var/script/OscamCheck.sh
03 04 * * 6 root /var/script/LogCleanUp.sh >> /var/cccamlog/CleanUp.log