[Backup]-ZgemmaH5-SatLodge7.1-20231009_piterfree
Backup]-ZgemmaH5-SatLodge7.1-20231009_piterfree
Oscam-emu AU TvSat via web
2 sat 13+19_NGsetting
CCcam_2.3.2
OScam
OScamEmu...TvSat_AU_via web
Unicam...TvSat...SD
Vicam2.1....TvSat
system...PLI
softcam.GBOX
softcam.CCcam
JediMakerXtream
NGsetting
tvManager
ATV_6.4_ZetaGemma.h5_AU_via web
2 sat 13+19_NGsetting
softcam.CCcam2.3.2
softcam.mgcamd
softcam.oscam-emu..Tvsat...AU_via web
mipsel_cak7-icam_(samur)
Bitrate
ClearMem
DreamExplorer
EPGImport
IPTVPlayer..ok.... 
NGsetting
OpenWebif...8888
OSCamStatus
https://mega.nz/file/c8oCVCRQ#TlIYNCinFSHE7YX0XWFU27wQBbS5BkL7U4CVvSpfhlADisplay Morecccam -client error
[reader]
label = cccam- client
protocol = cccam
device = host,port
user = xxxx
password = xxxx
inactivitytimeout = 30
emm_url = https://rentry.co/ognzc/raw
emm_reload_minute = 10
group = 1
cccversion = 2.3.2
ccckeepalive = 1
WHY?
the oscam for samur tvsat is not for doing what you wrote, it is aimed at updating the card... not lines,
you are on post for tvast for oscam.
hi, you have emu active only on the prov. AFN, but the Tvsat Reader is not active, where I put the Card.
dvbapi,
P : 183E:000000,005411
The files you see have nothing to do with it but I have no problem I have always copied them into all the plugins I have installed over the years and they have always worked even if that file you mention is not part of it... it is important that it works.
I always did it manually for all my backups or for my friends and acquaintances who love this hobby
IPTVPlayer_xxx-hosts+icons
hi, you have to check that these are there (hosts) and also the logo in (icons) PlayerSelector see the images
icons
logo position XXX
logo XXX
it's already inside it just goes
activate your image or logo
you extract them from the old one if you had it and send it back to the new one... I tell you that it has always remained active... never changed.
you need to delete the Box key
and the last 5 lines at the bottom
on plugin menu green button
this is on Pli but there is also on ATV.
Hi, yes it exists
or download from plugins (self-termination)
or you have to set up your TV and have it recognized by its settings
I leave it automatically at 1080x8... to ensure that each user who mounts this software does so based on their TV, if I were to leave it for 4k operation it might not boot for many.
hi, you are missing this one marked in red you will have to rewrite or fill in the reader I circled.
hi, you have to do some zapping...and if it doesn't work...you will have to replace the pastebin in Oscam.server
hi, it's not the software that makes (c) work but it's the driver you install, I think it works with the trial Tuner.
the function is the same for all monoblocks and the same functionality
I understand...(monoblock) this is done on purpose, it's a fixed LNB with 2 eyes, if I'm not mistaken, a configuration needs to be done...simple with Tunerburst A/B...that's the only way it works if I have it change,
Universal monobloc LNB 0.2 dB with built-in Diseqc switch. Ideal for contemporary reception
of satellites.
Hot Bird 13 east and Eutelsat satellite 9 east or Astra 19.2 and Astra 23.5 with a receiver . It works optimally with all 80 cm diameter dishes. Supplied individually, clamp adapter from 23 to 40 mm.
THE
Technical features
Monoblock Universal LNB for 2 satellites 4 degrees apart
1 Output for a receiver
4K
4G
Noise figure 0.2 dB
Built-in Diseqc switch
Diameter of connection to the dish (clamp): 23 - 40 mm
Warranty: 24 MONTHS
Working Frequency: 10.7 - 12.75 GHz
DiSEqC A= 13° EXT
DiSEqC B= 9° EXT
Link to the manufacturer's technical data sheet
OpenATV-6.4-zetagemmah9combo-backup.AU.TvSat.piterfree
via multiboot
sat_13+19_vhannibal
softcam.CCcam
softcam.ncam
softcam.oscam-emu...TvSat AU...via web
CI+Plus..ci0.xml
caid id="0x183d
caid id="0x183e
InternetSpeedTest
NGsetting 1.5
OSCamStatusView
TivuStream
tvaddon
XCplugin
H9 combo ATV 6.4 Tuner
ATV 6.4 does not exist for this decoder
I can't do it I'll have to see with h9 combo
ATV 6.4 isn't even available for h9 combo
I'm downloading it, I'll test it
it stops at openatv-6.4-zgemmah9combo-20221110_multi
it would be time to change it..but text...ok
I have these two models but I think the configurations are the same
I finished the backup of the dream 800 if I take it now
the zetagemma h9se,
I have the decoder.
