Posts by esuo2

  • Difference between CCcam(All versions) and CCcam for (specific images)

    Hi mates,
    Will like to ask...under CCcam Files session in the forum has
    <<CCcam - All Versions Download Here>>
    Version History CCcam 1.0.0 - CCcam 2.3.0 (present)
    I presume will work with all boxes by placing /bin files and CCcam.cfg in right dir with right permissions


    However..there is also a session for CCcam versions for specific images blackhole/openpli/Germini etc :36_002:
    Once again whats the difference???

  • Difference between OSCAM/CCCAM COMBO and Oscam,CCcam on Enigma box

    Quote from master G

    No, as a combo the softcam start/stop script has been modified to start both oscam then CCcam a few seconds apart.. If installing both separately you would need to start each individually.. Starting CCcam before oscam will cause problems as oscam is the card reader and CCcam will take over the device, stopping oscam from reading the card.. Thus the need for a start script that starts oscam, waits a few seconds then starts CCcam..


    Good explanation masterG
    So the deduction from the post is simple
    1.The type of script will tell if its combo..bcos it has to start oscam before CCcam
    2.It has nothing to do with any SPECIAL softcam called combo


    Please can we see the two scripts just to compare and learn
    Thanks


    :shake:

  • Difference between OSCAM/CCCAM COMBO and Oscam,CCcam on Enigma box

    Quote from dreamuser

    people use oscam to read their card and use cccam to send the info from card to their clients, so most people have oscam and cccam installed when they using box as a server, if u have a c line from someone u can just use cccam and put that line in the .cfg file or u can just have oscam installed and put the line i that, u just add a new reader and make sure you set the Protocol as cccam, to install in a box you need to say what type of box, but their are loads of backup images for enigma 1 & 2 boxes that already have oscam and cccam setup
    dreamuser


    Thanks dreamuser for the insightful post
    i know about the functions of the two
    but i wanted to know if there is a difference between the combo and installing oscam and cccam on ur box
    or let me put it this way,is it installing oscam seperately,and cccam seperately on the same box that we call combo?
    Thanks

  • modify image before loading to box

    Quote from cazuela

    This has made me think a little, why would anyone want to do this really ?? curiosity?
    so I checked out the net a little and found that russellhearn69 has got a bit of a history of renting/purchasing this cannot be denied...


    so why not a possible reseller ???
    Can you please respond to this post please ???
    Please take the time to read the rules again before you answer...


    @ cazuela
    I dont think it has something to do with resharing.....i beg to differ
    He just wants to learn to backup images,write his own skin,do more tweaking to source code...than just being spoonfed with already backuped image
    sometimes asking such questions are very hard...bcos one doent know where to start and end,it involves a lot
    anyway....:very-drunk:

  • bad reception in rain

    Quote from deltec1

    got a 1.2 meter prime focus dish and having bad reception on some satllites if I cover the lmb up will that make a difrense ie plastic pop botel


    please lets have a pix of the lnb...then i can advice something...bcos most pf lnbs come with plastic small covering to prevents inserts making their home
    in the lnb hole


    :thumbsup:

  • Prob with Barry Allen

    Dont think its installed properly
    *anyway its been long since i tried....google and there are step by step processes to help
    *also format flash drive from image,its very important
    *some images are also not barry allen friendly....
    Try out again and lets know the outcome
    :very-drunk:

  • modify image before loading to box

    Quote from russellhearn69

    Just wondering if it is possible to decompile an image so that i can add a few things to it such as oscam files etc rather than have to add it to the box after it has been loaded in, that way i can modify what i want then load it into the box and not have to ftp anything.


    any info on this would be great (i.e how its done if posssible)


    Thanks


    hi buddy,
    Please explain in detail what you want to achieve.....bcos you mentioned oscam files,in my opinion,installing oscam in ur receiver wont take more than 2mins....
    Am thinking may be you want to learn to create backup images and add important stuffs,many of us are here 24/7...wishing we could learn also..or there is something more i dont know...just spill it
    Great guys are here to help..lol
    :caz3::very-drunk:

  • help needed signal on hotbird and astra 19.2 and 28.2 if possible

    Hi mate,
    I don't really understand ur question
    but don't assume u will get signal by just raising from same position from the ground
    nail dish firmly and start all over again with the tracking
    also make some distance from dish to building to compensate for obstruction
    let's get things clearly, so I can help out very well
    thanks

  • Dreambox/Enigma1/2 Iimportant file paths

    Hi mates...
    Good evening to you all..Please I need the file paths for important files on enigma1/2
    eg. .oscam is in var/bin
    CCcam.cfg in var/etc
    sometimes knowing some file paths helps to work easily with enigma1/2 images
    If any one has/knows most of them could post here so we all can learn..
    Thanks..

  • how to check if alignment for motorised dish is correct

    Quote from andrewg1

    getting signal on 28.2e and 19.2e only. please help.//


    Hi mate,
    to properly check if you are on the clarke belt you need to track more sat in the east position....and make sure you get the maximum signal
    then also try west sats as well,at lease 3 or 4
    If you are able to get all the sats in 1line from east-west without altering the azimuth,then you are on the clarkebelt,try doing a fine tuning to optimise the signal quality

  • All about fringe satellite reception

    hi all
    i managed to pick h*tbird @13e here In Ghana using my 2.4M solid Prime focus Eurostar dish with my modified Lnb...
    these are the tps I managed to get


    How to track Hotbird in West Africa
    first track Eutelsat 16A @ 16e
    2a0a785e6.jpg


    which can be tracked with a minimum of 60cm in south saharan africa....


    4a56ceed226ecee8afc0.jpg

    pls make sure you hit the highest signal @ 98% on the famous SRT Strong reciever which is common here in sub-saharan africa,tweaking lnb also is very vital here....then you can track hotbird with the frequency

    Quote

    11138 H 27500 @ 68% on my 2.4M


    309140a50db.jpg


    with the reb ballon indicating my location....
    I must confess that my modified LNB has also been a vital signal boaster....increasing 6% signal compared to normal LNBs on the market
    will update the house soon on my modified LNB which works better than most of this known brands in Europe
    Always remember.....Never Say never

  • All about fringe satellite reception

    staddos
    please can you post all the working transponders on hotbird mate,I will like to do some tweaking and tracking this weekend....indicating the highest and most stable tp
    also with the lauch of 3D satellite,i think you should pull dowm nore tps than you have....just scan :rasta2bigsmoke0gf:

  • All about fringe satellite reception

    hi mate,
    very happy to hear you are around
    i think your dish needs a little tweaking to get very well aligned on the clack belt arc
    just do a little optimization on the dish...if I may ask do you get any fringe reception?
    the easiest one is zap angola Zap on Eutelsat 36B at 35.9°E - LyngSat,there is no FTA but at least it tells
    you u have a hand on fringe reception
    you can try that and lets see the output of your dish......

  • Dm 800se hungs with cline but stable with fta

    Quote from Mee®kat

    Open pli in my opinion is the best image for dreamboxes but have you thought about upgrading to 3.0 as it is available for your model.


    Do you remember what image was on the box b4 you used open pli or was this its first flash..also is the box official or clone


    I would also use an older version or at least try an older version of cccam as a test.


    I have tried a thousand and one images but problem still persist,its a clone.....when am watching fta box is stable and fine...could stay on for hours but i soon as i use CCcam/cline/internet box
    freezes in about 5 mins,and nothing could be done..remote will not respond,the only option is to put box off and on