Posts by Mee®kat

  • What To Buy Motorized Dish & Receiver?

    You will get plenty of sats from 42 east to 30w from that location mate(depending on dish size)/installation/.... from one of the pics it looks like your los is fine too...with a 80 or 90 cm and a good inverto black ultra lnb you will get 28.2/19.2/13e/16e/0.8 west and a few others which covers most of the main ones we want including hd ! need more pictures of your home to see whether another location might look less intrusive tho.

  • Difference between CCcam(All versions) and CCcam for (specific images)

    As caz has said it can also be setup dependant !


    When i used cccam as a reader it was any version between 2.0.11 and 2.2.1 on e1/e2 boxes which pretty much done the same thing..on pc however i preferred version 2.0.11 and it was not because of the debate about it stealing cards as i have never done that, it was because i personally found it coped better/ even auto boot scripts worked well with that version and it did seem to be more stable.


    Bin files in e2 boxes usually go to usr/bin and cccam configs in var/etc although some images differ location wise as stated above...pc bin files in var/bin and cccam config in var/etc.


    I have also never had a problem chmod wise either when i stick to 755 for bin files and 644 for configuration files.


    MK

  • TSmedia Plugin Support

    I have just installed version 7.7 and i am still getting the same error with 1channel...proxy appears to be ok so not sure what my issue is..i will try and uninstall then re-install the plugin again:(

  • no channels clearing

    Quote from billy thekid

    hi guys - got a vu+ultimo with cable tuner, got latest blackhole image on there got the cables.xml files and have put them in var/tuxbox, ive got AutoBouquets_C2_UltraLite_201406011500 installed, ive run this from the green button as its shown as a plugin, i get the following see pic showing its created the boquets, but im not getting any channels clearing not even the FTA ones...SNR is showing at around 70%?...my cable tumer is configured correctly i think ?..any help, i have an active line to a vm server if you know what i mean..any advice..



    FTA channels show SNR around 70%, but all the premium paid channels show SNR as 0%...???
    cheersfcaeafe8df.jpg
    cd3c6170.jpg


    Try an automatic scan inputting the correct net id and frequency for your area.

  • sly box key generator


    You can use windows very own scientific calculator to convert your boxid...note that it is not actually a boxkey although the software would suggest it is..also make sure you do not use any online id convertors as it is a surefire way of informing sly that your subscription is being tampered with.

  • Whats the point.

    Quote from bigall123

    I have done some reading up on this but not 1 that iv looked at explained a single thing to me what they can do. never mind i dont think il bother eny more, Il just stick with my f5s box. Thank you all eny way.


    So what was the point in this thread? if you dont understand anything posted about e2 boxes then what can we do for you:58_002:

  • DM7020 HD and oscam

    Quote from rcc_pt

    I do not know about the Webif, I do not use the Webif.


    Why? if you are using oscam to read and serve cards then how do you actually know what is going on !.... or is oscam just reading your cards? either way you should be looking at what the oscam webif actually is :) especially if you use the software.


    Quote from rcc_pt

    My config files, in Dreambox, are located in "etc/tuxbox/config/oscam".


    Sorry my nervousness.


    Its best you post your config files anyway even if they do work in a different receiver...however try location etc/tuxbox/config


    Install all config files to the config folder and restart.

  • DM7020 HD and oscam

    Quote from rcc_pt

    The problems are no ecm info, no picture, no signal of cards detection, nothing at all.


    I can sense you are getting a tad frustrated? you are best to leave that at the door before asking for help because you will be able to explain the issue more calmly with an end result of getting the help you need !


    Webif? you have not mentioned this above?


    Where are your config files located on this dreambox?

  • MGCamd Config for connecting to CCcam and Newcamd

    If you have been issued a newcamd line for slyuk then adapt your nline to look like this and add it to location usr/keys in newcamd.list file


    CWS = dyndns.org port username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserver <---( add this line only editing server details ) also ensure deskey(01=14) is correct


    Edit your mg_cfg file in usr/keys with data added below...your cline goes in cccamd.list...right click all files when edited and chmod to 644 = restart mgcamd


    If you still have issues then try different versions of mgcamd as already advised below..if symptoms persist then it could also be an issue with your cam that has been adapted to suit your image of choice so you would probably have to chance your arm and contact the authors with a cam query...i dont use clines so cant test your issue i,m afraid.


    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 02 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 02 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }


    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 02 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /usr/keys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    # 32 cccamd netclient, card list saved as /tmp/cccamd.info
    # (ECM only, supported server version up to 2.1.1, later not work)
    G: { 33 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 00


    # network ecm timeout in seconds
    K: { 05 }


    # newcamd dead routes connect retry, sec
    Q: { 10 }


    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 00 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 01 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 00 }


    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 04 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    # 08 stapi/kathrein
    # 09 stapi/ipbox
    # 11 stapi/openbox
    B: { 06 }


    # map all 180x nagra caids to 1801
    # default is 01
    F: { 00 }

  • I need some help with my dreambox

    Power supply issues are very common on dm500/800 units although faulty psu units usually mean the tuner wont play ball at all with total loss of signal or failure to power up which you do not appear to have...is there no free to air channels on that satellite which offer video?


    Old pc monitor power supply units are the best ones to use on these boxes..if you have one that fits try it.


    Another thing you should check is whether your newcamd/cline has not given up the ghost..i assume you have a copy of your CCcam.cfg/and or server details before you started flashing the unit?