Posts by Mee®kat

Quote from Beefybawz

meerkat when did you crawl back out your hole? iv seen your username before.last time i seen it was when the admin was giving you your last warning because of the way you treat people on here.If i remember correctly you lost the head and were abusing another member for no reason.

Are you talking about the thread concerning stevejo..no idea what you mean by the way i treat people on here?

Quote from Beefybawz

Iv had alot of people tell me your hated on this forum,got to agree.your an utter idiot as far as im concerned.Comment on anything i say all you want,no one could care less what you had to say

When did i crawl out of my hole,i am hated,i am an utter idiot and nobody cares what i say on this site according to you ! Now whos being abusive here?

And why dont you get your chums to sign your wee petition then and submit it to admin for them to make a decision regarding your claim.

I would happily ask for my account to be blocked if that was true and to be ohnest i am not sure i should waste my time on here with members like yourself anyway.

MK

Quote from Beefybawz

meerkat go moan elsewhere.im sure i speak for everyone here when i say im sick of your arrogant "im better than you" snide remarks.Dont comment on anything i say.We have all seen you getting pulled off the mods for the way you speak to people on here.No one on here has a good word to say about you.butt out

Dont talk even more rubbish than you already have tonight..this is the first time i remember seeing your username anyway...these comments are even more chidish than your last one regarding your mate who is going to take even more money off people who have already been stung on ebay..2 wrongs make a right in your head does it.

And i will reply and butt in where i like even more now to everything you say on every thread i find you have posted on so you butt out while you can.

Quote from Beefybawz

haha amazing.My m8 does serious doxing.If you dont know what doxing is,its finding out peoples real identity online through really advanced methods.Hes seeing a big amount of people who have purchased these boxes with gifts coming to him already and thats only with some hd channels gone.Looking to find out the real identity of people on ebay and forums etc.wait till the full thing goes.hes waiting in the wings to go onto all these satellite forums and offer his service to anyone who bought one and the seller dissapeared.hes just gonna charge a couple of quid each and will make a fortune.If someone on ebay or that think they used a fake name etc and will be ok then think again.When you visit a site you leave a footprint and his job is tracing that footprint back to you and getting your real details.All i can say is i hope you kept the money you made haha

Sorry, your mate is going to do what..charge people who were scammed a couple of quid to trace payservers on ebay..and then what..send the heavy team round or something because they certainly cant use the information to call the cops can they. Your mate could also face charges for identity theft and bring you in on it..did you think of that?

You and your mate are just as bad as these scumbags on ebay anyway bragging that he will make a fortune and you are also a bit late mumping your gums now regarding people being scammed for these boxes dont you think.

Quote from anniman

that's the way I would normally do it but it wouldn't start the last time. in the config folder I have the folder name the same as the oscam binary and usually its in the config folder without being foldered again

I have not used blackhole in a while but i never had a problem to be ohnest.

Try deleting everything you have done so far and choose an ipk from the softcam packs that masterG has linked you to...so for instance if you chose the ipk oscam8639 and mgcamd then after install and reset look in your directory @ usr/bin...delete the oscam bin that is in there taking a note of what it is named as/then copy the version i have attached to the same directory and rename it exactly as the older version was and reboot your box.

Attached version 9705 for you to try.

MK

Quote from anniman

where is the binary located to swap with a newer file?

Is it not in usr/bin?

Dont think it matters whos in the wrong now does it..dude has been been stung and let that be a lesson to others..do some research before you cry about your spilled milk...buying a heap of junk from a tramp on fleebay only has one outcome!

Check and see if its 2.0.9.1 you are on as it should be available via software update in your menu..as for vix cams..i have used cams for vix images that are posted on here and they worked ok for me, vix also have a link on the website to download what cams you need but better still all cams are now available via the vix addon server anyway.

Quote from SatelliteJunkie

I'm not an engineer and I have no wish to attempt connecting the wires from the dish to the box myself. I was going to hire someone to do it.

Surely someone here with a big dish can confirm if you get regular picture breakup or not for a split second on some recordings?

You were going to hire someone to disconnect a couple of fplugs from a box? Its pretty much the same as turning a tap on and off !

I had problems with older bh images with random freezes on recordings...either update whatever image you are using to the latest or back up your settings and give another image a try.

Quote from reziel84

i ask the seller and he answer me:
the THOMSON DSI-DH310 use to do a cs,but he need a "patch". he don't have a 999x and the HD channel work....
some one can explain me?

Sounds like italian coders have somehow found a way past the security on this box making it possible to cs an italia card including HD and also without the dreaded card errore..

3000 euros is crazy tho and only people who run commercial servers would entertain that.

Quote from hacked

my conax card needs no unique emm.
The card is updated only with shared emm.

setting emmcache = 1,3, -1, I have not tried. Have always used emmcache = 1,3.2 for Viasat and Canal Digital, and can of course try your example.
My main problem is really that ecm time varies widely, even on a local user on my network. ecm time may vary from 200ms to 1500ms. But maybe it should be so in oscam?

emmcache is really only for updating emms so thats just a suggestion for future updating of your conax cards entitlements... varying ecm times with conax cards does happen..i seen mine go up and down like a barmaids knickers but it is never a problem freezing wise...i am not sure if canal are upto something mind you....

Viasat is ofcourse nds...in an earlier post i spotted you were not blocking global..not an immediate issue but are you experiencing high ecm times with this card too?

As a test run your problem card/s in a linux box to determine whether you have server issues or not.

Quote from pheonix

Build 011 failed at about 95 percent through the build process, as was posted on WoS which could account for your issue, but it was not a corrupted bootloader no matter what you claim.

Strange why a reflash of my bootloader sorted the issue is it not tho..in any case it makes no difference as i ended up flashing open pli back to my receiver anyway as i did not like what i seen.

Btw i did not create this thread header..an admin or moderator has done that..i simply posted my issue in your helios update thread...bad me.

Quote from neolxs

Did you consider it may have just been a bad flash?

Dont think so considering this was just an online update from version 010 to 011

Dont care what anyone says including yourself mr pheonix...i updated my vu duo1 to helios 011 and the bootloader on my box became corrupted...constant reboot even in standby which i realized when my timers were constantly trying to record and fail!...i actually thought my box had popped a cap but luckily it was just a case of a bootloader reflash..back to open pli again fook dat crap.

Quote from snappy

Looking at WOS on the Vu+ I noticed the solo was 1080i, not 1080p. Looking elsewhere it seems that on a 1080p 32" hdtv this is hardly noticeable. Any thoughts?
Also the WOS site offered 4 firmwares. On my Spiderbox and TM I loaded "independently" upgraded firmware. I assume I'd do the same here. But which of the options makes best sense to have at the start? Vix?

solo2 and duo2 are the Awsome choices to make which will make your choice kinda futureproof...However there are no 1080P live so to speak broadcasts at present unless you watched tests on 10east? sly recently tested an english premiership match on a 150" samsumg in ultra hd...or 4k as it is more commonly known as now so its on its way to us but not just yet!

Netflix via virgin media on their tivo box are broadcasted in 1080p tho.

Quote from thatfellow

Cardman 3021 cant be overclocked m8
So this will surfice..

Code

[reader]
label                         = conax
protocol                      = pcsc
device                        = 0
caid                          = 0B00
detect                        = cd
ident                         = 0B00:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
[COLOR='#FF0000']blockemm-u                    = 1[/COLOR]
blockemm-g                    = 1




[reader]
label = nds
protocol = pcsc
device = 1
caid = 093E
boxid = xxxxxxxx
detect = cd
ident = 093E:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1

Display More

Also m8, not familiar with the conax card but you are blocking unique EMMs, is that correct?

Shared is the emm you are after with conax cards so that is correct mate...

hacked as said by thatfellow omnikeys run at 5mz so if anyone is going to set card mhz to anything with omnikeys it should be set at = 500

If you really want to overclock your card to say 6mhz then i would recommend an ftdi reader...tbh tho omnikey readers are great and your omnikey is already overclocking your card so no real need to buy another reader.

Below is my reader for a conax card...the emmcache i am using is required for the particular caid i am sharing so you might want to try that too

[reader]
label = npoland
description = npoland
protocol = mouse
device = /dev/ttyUSB0
pincode = 1234
services = !orf,!***_link,npoland
cacheex_allow_request = 0
caid = 0B01
rsakey = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ecmwhitelist = 0B01:6C,76
detect = cd
mhz = 600
ident = 0B01:000000
group = 3
emmcache = 1,3,-1
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-s = 1
auprovid = 000B01

The majority of primafilla channels were apparantly hacked on older caids like 0919 and possibly 093b...they are obviously taking steps to eradicate that.

Quote from Banny

Im trying to install a new hdd in a vu duo, it has an old image vix image on which has the time shift option built in, as some of you will know its been ages since ive done a lot with the hobby.

I have initialised and formatted the hdd using the menu options, but i still cant get it to work properly. I remember when I did it last time I did it all via telnet, but I can't remember the commands, to list the available devices and then did you have to 'map' or create a link to the hdd\timeshift folder.

I have had a look but cant seem to find what I am looking for, cheers for any help :)

As mckee25 says you will have to update your image as older drivers struggled with permanent timeshift..with later images you will then find the option to choose disable it or enable for the set amount of seconds after a channel change.

Btw i have used PTS on just about every image and i found openpli to be the most stable while using this option.

Quote from colo

This is not true, successful dumps and extraction of boxkeys and rsa keys has been possible since 2009

Yes via stb! nothing via the smart card which i was relating to with my post.

Quote from neolxs

What is strange is that its still only the 5 channels at the moment.

Why havent they switched off more yet?

Not strange really if you take a minute and think about it...a possible theory is that nds do not want to put too much pressure on slys call centers and their service engineers with inundated arrangements to swap out whatever incompatible boxes that are still out there..it could also be the way their system works or it could be a case of lets leave the important sh_it like sports and kids until we swap out enough complaints then whack the important sheet.

While i am here i have seen the usual rumor mill build up of its mpeg change crap...bollocks..if that was the case the developers of linux compatible boxes would have released something..if you stick your card in rqcs you will see it complains that you have a wrong boxkey...in other words it does not have a clue how to read your card due to the new hw pairing key!

MK

Does anyone know if its possible to add the function where the resolution can be changed via the menu button..ie normal/high hd etc as i have just checked itv player and it must be set to low as the picture is cack. Trying to get this sorted for a couple of mates but i can keep them on vix for now if its an issue.

Also in 40d i get an error..something about programme not available on ps3 VOD! Not sure if thats something to do with the flash player problem or what.

Apart from that works well nice job.

MK

Credits to sattv5..scotland non and adult bouquets added

Moved Frequency Channels Updates 30/04/2014

London Live (Channel 1077) added to EPG Channel 117
Buzmusic (Channel 372) removed as as left Astra 28a
CN Too (Channel 602) removed as as left Astra 28a
Cartoon Network +1 ( Channel 602) (NEW Channel) ( 12051 V 27500)
Travel Channel (Channel 251) Changed EPG Position to 252
Travel Channel +1 (Channel 252) Changed EPG Position to 263
Food Network (Channel 262) Changed EPG Position to 251
Food Network +1 (Channel 263) Changed EPG Position to 262
Nick Jr 2 (Channel 620) rebranded to Nick Jr Peppa
Reality Hub (Channel 920) rebranded as Electric Blue
XXX Gay (Channel 930) removed as left astra 28a
CH NINE UK (Channel 834) Change frequency to 11224 V 27500
Chartshow Dance (Channel 382) Changed EPG Position to 372
Fitness Tv (Channel 282) rebranded to FAB TV
Trace Spts (Channel 442) removed as as left Astra 28a
Real Radio (Radio section) Removed as left Astra 28a
The Arrow (NEW) (Radio Section)
*** Box Office HD (Channel 701) Changed Frequency to 10862 H 23000
bid (Channel 645) removed as left Astra 28a
price drop (Channel 654) removed as left Astra 28a
BT Sport 1 HD (Channel 413) Changed Frequency to 11603 V 29500
BT Sport 2 HD (Channel 414) Changed Frequency to 11603 V 29500
ESPN HD (Channel 417) Changed Frequency to 11603 V 29500
Faith World TV Changed Frequency to 11681 V 27500
Cruzr Gay TV Changed Frequency to 11681 V 27500
Xpanded TV Changed Frequency to 11681 V 27500
Lifetime+1 Changed Frequency to 11681 V 27500
BON TV Changed Frequency to 11681 V 27500
Box Nation Changed Frequency to 11681 V 27500
CHSTV Changed Frequency to 11681 V 27500
Ahlebait TV Changed Frequency to 11681 V 27500
PTV Prime Changed Frequency to 11681 V 27500
Samaa Changed Frequency to 11681 V 27500
OHTV Changed Frequency to 11681 V 27500
KICC TV Changed Frequency to 11681 V 27500
Sikh Channel Changed Frequency to 11681 V 27500
The Active Channel Changed Frequency to 11681 V 27500
Xpanded TV 2 Changed Frequency to 11681 V 27500
WRN Europe Changed Frequency to 11681 V 27500
Insight Radio Changed Frequency to 11681 V 27500
Diamond RD Changed Frequency to 11681 V 27500
TWR Changed Frequency to 11681 V 27500
Desi Radio Changed Frequency to 11681 V 27500
Rainbow Changed Frequency to 11681 V 27500
Kanshi Radio Changed Frequency to 11681 V 27500
Liberty Changed Frequency to 11681 V 27500
Absolute Radio 80’s Changed Frequency to 11681 V 27500
Absolute Classic Rock Changed Frequency to 11681 V 27500
Absolute Radio 90’s Changed Frequency to 11681 V 27500
Jazz FM Changed Frequency to 11681 V 27500
Absolute Radio Changed Frequency to 11681 V 27500
Solar Radio Changed Frequency to 11681 V 27500
STV HD (NEW channel) (Channel 1059) (10994 H 22000)
Bliss (Channel 376) rebranded 21st cent Bliss

(*** Arts 1+2 HD,History HD,Crime HD & Nat Geo HD No Longer available unless through official Sub/Box)