Need info on VU+ JTag Broadcom Tools ( Solved )
- rayq333
- Thread is marked as Resolved.
-
-
Thanks arber for this useful post.
May anyone help me how i connect bbs tool to pc with usb (what kind of cable is needed) please attach a pic or item number for this cables.
Can i use a usb to usb connector ? -
Nobody is done jtag of Vu Plus to hlep me ???
-
Seems there´s not much need for jtag except for extreme cases.
Could you please refrain from using such large lettering as there really is no need for that either. -
-
try to identify on your BBS board
this
BBS pinout
1 is 3v3==========you can use a meter !!!!!, or poz 10 inside {near procesor} counted from cuart . THIS IS RED wire- in case of your Board, from photo.
2 is BSC_SCL======pozition 7 from Cuart
3 is BCS_SDA======idem
4 is GND==========this is easy :)))) -
try to identify on your BBS board
this
BBS pinout
1 is 3v3==========you can use a meter !!!!!, or poz 10 inside {near procesor} counted from cuart . THIS IS RED wire- in case of your Board, from photo.
2 is BSC_SCL======pozition 7 from Cuart
3 is BCS_SDA======idem
4 is GND==========this is easy :))))Is usb cable a (usb-usb) cable to Pc ?
-
Is usb cable a (usb-usb) cable to Pc ?
is a cable {4 wires} made by you, from old computer board-- that supply power .
please look on photo,and you will understand: -
salvation
I saw a site that we could get it on EBAY this -
[quote='yinyang','https://linuxsat-support.com/index.php?thread/&postID=81774#post81774']is a cable {4 wires} made by you, from old computer board-- that supply power .
please look on photo,and you will understand:
Please help me what is this cable in this pic. & where is connected ?
6b812f46cc35f525ebe7f4a.jpg -
yes, the black cable- from picture is a USB -USB mini {or Micro} that connect Cypress with PC
6b812f46cc35f525ebe7f4a.jpg[quote='yinyang','https://linuxsat-support.com/index.php?thread/&postID=81774#post81774']is a cable {4 wires} made by you, from old computer board-- that supply power .
please look on photo,and you will understand:
Please help me what is this cable in this pic. & where is connected ? -
alian you have already been warned about using large font size - please heed any warnings given in future.
-
saved
This tutorial will help me I think!
voila, one morning, after a stormy night, I found my VU + DUO with a red LED on the display and "starting", I can no longer flascher with usb + Util + seen there.
with a jtag you think I can get it?
if so, where to find the file: Broadcom Studio 3
I found all the other files, I lack that here.
thank you -
Salut
C'est bon, je l'ai trouvé en décompressant Bcm 97335 , merci au site !!
Je voudrais connaitre quelqu'un qui l'a déjà fait pour lui racheter son jtag.
Avec Ebay il faut presque 1mois pour le recevoir.
Une question aux modérateurs : sur le site faut il écrire en Français ou en Anglais, merci. -
All that you need , you will find here, on this thread, and also {soft } on 4shared.com, if you give a search there.
-
Hi can you tell me, why deleted my post? I wrote then I have problem with status conected. I Connect via manual on this thread, but state is only red no connected. Can you advice me, where is err? On Vu+duo only light red led. Com port and other perifer is death, hyper terminal is nothing write. I use on Windows 7. May I use in Win XP?
Drivery is OK, and connect too. Thanks for your advice and sorry, if mustnt write here. -
For ALL. I have yet one full function peace vu+duo. But if I connected via board, it same problem with no connect in studio 3. Can you tell me, if this procedure is function on full function vu+ duo. Can you anybody test with repair peace and report?
Thank you.
-
hypnos - you read and agreed to the rules - and part of the rules state you have to post an introduction before posting on the open forum
please adhere to this before posting further, thanks
-
Hi, I'm a bit concerned about the license terms of the Broadband Studio, as I can't find any offcial reference from Broadcom. Is it OK to use and/or share it? Can anybody shed some light on this?
Thanks!
-
bonjour
j'ai effectué et respecté la procédure du jtag avec tous les éléments mais quand je connecte la vu+duo au Cypress CY7C68013A EZ-USB FX2LP USB2.0 je n'ai pas de connexion?
comment savoir si c'est un problème d'alimentation, ma vu+duo est resté allumée led rouge et "starting " sur la facade suite à un orage,je n'ai plus de liaison avec la prise usb ainsi que la prise rs232, j'ai remplacé le condensateur 807 .
merci
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!