Working Oscam PowerVu Biss Config
-
- OSCam Configs
- Mersad_Maral
- Thread is marked as Resolved.
-
-
Hi every one I have a problem that I try hard to resolve but I cant.
I do have a DM800SE (Clone sim 2.1) with this image openpli-9.3-sim2.1-dm800se_20200524 and this Oscam enigma2-softcams-oscam-all-images_11.579-emu-r798-arm+mips_all,
I do open some Powervu Channels with emu but can open the Disc***** Networks on the Astra 4 (4,8 E) all the others on the same satellite on Powervu no problem.
I do have the same Oscam on the DM900 4K enigma2 image and works ok
what am i doing wrong on the DM800HD SE :unhappy:
The config file,
Code
Display More[global] logfile = /tmp/oscam.log #logfile = stdout nice = -1 maxlogsize = 1024 waitforcards_extra_delay = 100 preferlocalcards = 1 readerrestartseconds = 3 block_same_ip = 0 block_same_name = 0 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 disablecrccws = 1 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 #reshare_mode = 0 #stealth = 1 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dreamosat read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
Can any one give me an help to resolve this,
Best Regards
:thumbup:
-
Hi every one I have a problem that I try hard to resolve but I cant.
I do have a DM800SE (Clone sim 2.1) with this image openpli-9.3-sim2.1-dm800se_20200524 and this Oscam enigma2-softcams-oscam-all-images_11.579-emu-r798-arm+mips_all,
I do open some Powervu Channels with emu but can open the Disc***** Networks on the Astra 4 (4,8 E) all the others on the same satellite on Powervu no problem.
I do have the same Oscam on the DM900 4K enigma2 image and works ok
what am i doing wrong on the DM800HD SE :unhappy:
The config file,
Code
Display More[global] logfile = /tmp/oscam.log #logfile = stdout nice = -1 maxlogsize = 1024 waitforcards_extra_delay = 100 preferlocalcards = 1 readerrestartseconds = 3 block_same_ip = 0 block_same_name = 0 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 disablecrccws = 1 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 #reshare_mode = 0 #stealth = 1 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dreamosat read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
Can any one give me an help to resolve this,
Best Regards
:thumbup:
Hi guys fixed wrong Softcam.Key
Thanks
-
should i replace all the files in the folder or is it just one file to enable powervu . I have android k2 pro and have to find where i have to replace...
If any one knows please advice
-
"Arch64" structure dreambox one only for "streaming relay" yet? No provision for an updated configuration for this architecture? pw and biss without work.
-
-
good sharing thank you on my behalf
-
hi
AFN is working or not??
-
hi
AFN is working or not??
asking the same
-
Got some pv (SKY,HBO..CNN)working on 68east,.. however discovery, and Sony network not showing...any solution?
-
hi
AFN is working or not??
asking the same
NO, unless you are a us army member, or you have a iks sub.
-
hi
AFN is working or not??
asking the same
NO, unless you are a us army member, or you have a iks sub.
Where can i get an iks sub...
-
hi
AFN is working or not??
asking the same
NO, unless you are a us army member, or you have a iks sub.
Where can i get an iks sub...
google can help you....
-
I have problems with PowerVU Discovery channels
When I have in oscam.conf this settings Sky DE is working, but PowerVU doesn't:
[global]
logfile = stdout;/tmp/oscam.log
nice = -5
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
disablecrccws_only_for = 0500:030B00;1819:00006D;09C4:000000;098C:000000;1884:000000;1811:003311,003315;1883:003311;1819:00006D
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
[cache]
[webif]
httpport = 4115
httphelplang = de
httprefresh = 10
httppollrefresh = 20
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httposcamlabel = OSCam-Trunk
http_status_log = 1
and with this settings it is reverse, PowerVU working and Sky DE is freezeing every few seconds:
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 5000
clientmaxidle = 180
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[cache]
[newcamd]
port = 10001@
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.4
stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = vuplus
[webif]
httpport = 8888
httpuser =
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
What would be the solution for this?
-
I have problems with PowerVU Discovery channels
When I have in oscam.conf this settings Sky DE is working, but PowerVU doesn't:
[global]
logfile = stdout;/tmp/oscam.log
nice = -5
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
disablecrccws_only_for = 0500:030B00;1819:00006D;09C4:000000;098C:000000;1884:000000;1811:003311,003315;1883:003311;1819:00006D
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
[cache]
[webif]
httpport = 4115
httphelplang = de
httprefresh = 10
httppollrefresh = 20
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httposcamlabel = OSCam-Trunk
http_status_log = 1
and with this settings it is reverse, PowerVU working and Sky DE is freezeing every few seconds:
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 5000
clientmaxidle = 180
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[cache]
[newcamd]
port = 10001@
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.4
stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = vuplus
[webif]
httpport = 8888
httpuser =
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
What would be the solution for this?
I do have this config and it work well
[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
maxlogsize = 1024
waitforcards_extra_delay = 100
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000
disablecrccws = 1
[cs378x]
port = 13001
suppresscmd08 = 1
[newcamd]
port = 12121@0000
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 12000
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
#reshare_mode = 0
#stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dreamosat
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] here 2 for OE2.0 and 1 for OE2.2/2.5
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
Try may work for you
-
-
Oscam and oscam emu both have logs, the logs are there to help.
The configs are also specific to the user and the users requirements.
It is not rocket science, like i said look at the log to see what the problem is, then configure your own configs
There is even an oscam wiki to help with this
https://wiki.streamboard.tv/wiki/OSCam/en
the emu patch also has help
https://github.com/oscam-emu/o…tched/wiki/PowerVU-config
I could easily upload my configs, but what works for my requirement may not work for yours.
-
Appreciate the information., quite a"ton" notes to read.. will keep reading. Thanks once again!
-
Anyway one more question, won't a well configured powervu, in one box work for all? If so which particular file(s) can be transferred between boxes?
-
I have problems with PowerVU Discovery channels
When I have in oscam.conf this settings Sky DE is working, but PowerVU doesn't:
[global]
logfile = stdout;/tmp/oscam.log
nice = -5
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
disablecrccws_only_for = 0500:030B00;1819:00006D;09C4:000000;098C:000000;1884:000000;1811:003311,003315;1883:003311;1819:00006D
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
[cache]
[webif]
httpport = 4115
httphelplang = de
httprefresh = 10
httppollrefresh = 20
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httposcamlabel = OSCam-Trunk
http_status_log = 1
and with this settings it is reverse, PowerVU working and Sky DE is freezeing every few seconds:
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 5000
clientmaxidle = 180
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[cache]
[newcamd]
port = 10001@
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.4
stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = vuplus
[webif]
httpport = 8888
httpuser =
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
What would be the solution for this?
I do have this config and it work well
[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
maxlogsize = 1024
waitforcards_extra_delay = 100
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000
disablecrccws = 1
[cs378x]
port = 13001
suppresscmd08 = 1
[newcamd]
port = 12121@0000
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 12000
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
#reshare_mode = 0
#stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dreamosat
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] here 2 for OE2.0 and 1 for OE2.2/2.5
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
Try may work for you
That one mess everything. Ahh ok, I will use Ncam and OScam...
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!