Working Oscam PowerVu Biss Config

There are 115 replies in this Thread which was already clicked 68,446 times. The last Post () by tvline.

    Hi every one I have a problem that I try hard to resolve but I cant.


    I do have a DM800SE (Clone sim 2.1) with this image openpli-9.3-sim2.1-dm800se_20200524 and this Oscam enigma2-softcams-oscam-all-images_11.579-emu-r798-arm+mips_all,


    I do open some Powervu Channels with emu but can open the Disc***** Networks on the Astra 4 (4,8 E) all the others on the same satellite on Powervu no problem.


    I do have the same Oscam on the DM900 4K enigma2 image and works ok


    what am i doing wrong on the DM800HD SE :unhappy:


    The config file,






    Can any one give me an help to resolve this,


    Best Regards

    :thumbup:

    Hi guys fixed wrong Softcam.Key


    Thanks

    should i replace all the files in the folder or is it just one file to enable powervu . I have android k2 pro and have to find where i have to replace...

    If any one knows please advice

    I have problems with PowerVU Discovery channels

    When I have in oscam.conf this settings Sky DE is working, but PowerVU doesn't:


    [global]

    logfile = stdout;/tmp/oscam.log

    nice = -5

    maxlogsize = 128

    waitforcards = 0

    preferlocalcards = 1

    disablecrccws_only_for = 0500:030B00;1819:00006D;09C4:000000;098C:000000;1884:000000;1811:003311,003315;1883:003311;1819:00006D


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 0

    request_mode = 1

    user = Receiver

    read_sdt = 2

    boxtype = dreambox


    [cache]


    [webif]

    httpport = 4115

    httphelplang = de

    httprefresh = 10

    httppollrefresh = 20

    httpshowmeminfo = 1

    httpshowuserinfo = 1

    httpshowecminfo = 1

    httpshowloadinfo = 1

    httpallowed = 0.0.0.0-255.255.255.255

    httposcamlabel = OSCam-Trunk

    http_status_log = 1


    and with this settings it is reverse, PowerVU working and Sky DE is freezeing every few seconds:


    [global]

    disablelog = 1

    logfile = /dev/tty

    clienttimeout = 5000

    clientmaxidle = 180

    netprio = 1

    nice = -1

    maxlogsize = 1000

    waitforcards = 0

    preferlocalcards = 1

    dropdups = 1


    [cache]


    [newcamd]

    port = 10001@

    key = 0102030405060708091011121314


    [cccam]

    port = 12000

    nodeid = 4736728B103213F0

    version = 2.1.4

    stealth = 1


    [streamrelay]

    stream_relay_enabled = 0


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 0

    request_mode = 1

    delayer = 60

    user = dvbapiau

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 1

    boxtype = vuplus


    [webif]

    httpport = 8888

    httpuser =

    httpshowmeminfo = 1

    httpshowuserinfo = 1

    httpshowcacheexinfo = 1

    httpshowecminfo = 1

    httpshowloadinfo = 1

    httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255


    What would be the solution for this?

    2x VU+ Zero 4K

    BlackHole 3.1.0

    LNB 19.2E 16E 13E 1.9E 0.8W

    Samsung 65" and 55"

    Edited once, last by maurer ().

    Like 2

    I do have this config and it work well


    [global]

    logfile = /tmp/oscam.log

    #logfile = stdout

    nice = -1

    maxlogsize = 1024

    waitforcards_extra_delay = 100

    preferlocalcards = 1

    readerrestartseconds = 3

    block_same_ip = 0

    block_same_name = 0

    ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j

    disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000

    disablecrccws = 1


    [cs378x]

    port = 13001

    suppresscmd08 = 1


    [newcamd]

    port = 12121@0000

    key = 0102030405060708091011121314

    mgclient = 1


    [cccam]

    port = 12000

    nodeid = 24D5EF28108C14E0

    version = 2.3.0

    reshare = 0

    #reshare_mode = 0

    #stealth = 1


    [streamrelay]

    stream_relay_enabled = 0


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 0

    delayer = 60

    ecminfo_type = 1

    user = dreamosat

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] here 2 for OE2.0 and 1 for OE2.2/2.5

    boxtype = dreambox


    [webif]

    httpport = 8888

    httprefresh = 10

    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


    Try may work for you

    • Official Post

    Oscam and oscam emu both have logs, the logs are there to help.

    The configs are also specific to the user and the users requirements.

    It is not rocket science, like i said look at the log to see what the problem is, then configure your own configs


    There is even an oscam wiki to help with this


    https://wiki.streamboard.tv/wiki/OSCam/en


    the emu patch also has help


    https://github.com/oscam-emu/o…tched/wiki/PowerVU-config


    I could easily upload my configs, but what works for my requirement may not work for yours.

    That one mess everything. Ahh ok, I will use Ncam and OScam...

    2x VU+ Zero 4K

    BlackHole 3.1.0

    LNB 19.2E 16E 13E 1.9E 0.8W

    Samsung 65" and 55"

    Like 1

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login