Ncam Emu compiled and patched by RAED

mehrdad1370 · May 6th 2020

Code

Hi, I use stapi receivers. And I don't know in which part of the plugin and which folder to copy the tuxbox folder. etc or keys or on the main page of the plugin.
Thank you for your help

bhageshmeena · May 7th 2020

I have zgemma H9twin ncam 10.9 works fine just problem CCcam.cfg not working with ncam. Please share any solution

**fairbird** · May 7th 2020

Update your config from latest update you can download it from first post.

And If the issue .. Please share ncam.log from /tmp

Youchie · May 8th 2020

ncam 10.9 x86-64 work in Ubuntu (only need to update ssl and curl)

**fairbird** · May 8th 2020

Give me full log as like this see under my ubuntu 19.10

Code

raed@fairbird:~$ ./ncam.x86_64
17:21:31 00000000 s >> NCam <<  cardserver log switched, version 10.9, revision r1 build 08-05-2020 (x86_64-linux-gnu-ssl)
17:21:31 00000000 s     (main) System name    = Linux
17:21:31 00000000 s     (main) Host name      = fairbird
17:21:31 00000000 s     (main) Release        = 5.3.0-51-generic
17:21:31 00000000 s     (main) Version        = #44-Ubuntu SMP Wed Apr 22 21:09:44 UTC 2020
17:21:31 00000000 s     (main) Machine        = x86_64
17:21:31 00000000 s     (main) creating pidfile /tmp/.ncam/ncam.pid with pid 31617
17:21:31 00000000 s      (emu) NCam-emu version 798
17:21:31 00000000 s     (main) signal handling initialized
17:21:31 00000000 s   (config) ERROR: Cannot create file "/var/tuxbox/config/ncam.srvid2.tmp" (errno=2 No such file or directory)
17:21:31 00000000 s   (reader) emulator [emu] creating thread for device emulator
17:21:31 00000000 s     (main) waiting for local card init
17:21:31 6ED83AA1 r      (emu) Stream key delayer initialized
17:21:31 6ED83AA1 r      (emu) Stream relay server initialized
17:21:31 6ED83AA1 r   (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
17:21:31 00000000        (emu) INFO: FFDecsa parallel mode = 128
17:21:31 434E9846 h    (webif) webif: decompressed 204252 bytes back into 466456 bytes
17:21:31 434E9846 h    (webif) HTTP Server running. ip=0.0.0.0 port=8181
17:21:32 6ED83AA1 r   (reader) emulator [emu] card detected
17:21:33 6ED83AA1 r   (reader) emulator [emu] found card system emu
17:21:33 6ED83AA1 r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
17:21:33 6ED83AA1 r      (emu) Cannot open key file path: /var/tuxbox/config
17:21:33 6ED83AA1 r      (emu) Cannot open key file path: /var/keys
17:21:33 6ED83AA1 r      (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
17:21:34 00000000 s     (main) init for all local cards done
17:21:34 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
17:21:34 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
17:21:34 00000000 s (anticasc) anti cascading disabled
17:21:34 576135FD c   (client) plain dvbapi-client granted (anonymous, au=off)
17:21:34 576135FD c   (dvbapi) ERROR: Could not detect DVBAPI version.

Display More

and also please you have a look the repaly

Ncam 10.9 compiled and patched by READ

Youchie · May 8th 2020

my ubuntu-14.04.1

worked by ssl and curl

worked great

Code

>> OSCam <<  cardserver log switched at Fri May  8 20:53:26 2020
-------------------------------------------------------------------------------
2020/05/08 20:53:26 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11578-798 (x86_64-linux-gnu)
2020/05/08 20:53:26 00000000 s     (main) System name    = Linux
2020/05/08 20:53:26 00000000 s     (main) Host name      = cccam.Local.Card-System-Product-Name
2020/05/08 20:53:26 00000000 s     (main) Release        = 3.13.0-32-generic
2020/05/08 20:53:26 00000000 s     (main) Version        = #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014
2020/05/08 20:53:26 00000000 s     (main) Machine        = x86_64
2020/05/08 20:53:26 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6430

**fairbird** · May 8th 2020

ubuntu 14 or 15 or 19 (all same path same method)

**fairbird** · May 8th 2020

The problem for sure from config files ..

Check your config files ..

Put config file in same path what I mentioned here

Ncam 10.9 compiled and patched by READ

Also WHERE is ncam.log ?!!! I have asked you to post it here ?!!

**fairbird** · May 8th 2020

Put the ncam file in home directory and give command run

Code

./ncam.x86_64

Then send the log from terminal

**fairbird** · May 8th 2020

Very clear ... You need to update your openssl to 1.1

https://askubuntu.com/question…-1-1-and-libcrypto-so-1-1

Why you are still using old version of ubuntu-14.04.1 ?!!

Now Ubuntu released 20.04 ...

Youchie · May 8th 2020

Quote from fairbird

it very clear ... You need to update your openssl to 1.1
https://askubuntu.com/question…-1-1-and-libcrypto-so-1-1

Why you are still using old version of ubuntu-14.04.1 ?!!

Now Ubuntu released 20.04 ...

Display More

workss good

drini73 · May 9th 2020

Quote from Azzurra

Quote from fairbird

armv7 = cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

Why not read the Tivusat gold card ???

It's true @fairbird! Ncam 10.9 does not read both Tivusat and Mediaset cards.

**fairbird** · May 9th 2020

with version 10.8 does it works ?!!!

And also do this config ... then test it if does not work send the log of ncam from tmp

3a901.png

5e00be5.png

drini73 · May 10th 2020

Quote from fairbird

with version 10.8 does it works ?!!!

And also do this config ... then test it if does not work send the log of ncam from tmp

Hi @fairbird!

Regarding Ncam 10.8 everything was fine.

As for Ncam 10.9 I did the changes you asked me to do in ncam.config (I set netprio to "0") and nothing happen. Still the same problem with Tivusat card.

Furthermore, on the contrary with what happens with Ncam 10.8, when I try to see the multistream channels (the Italian ones in satellites 9.0 E and 5.0 W) with the Ncam 10.9 it is impossible.

Attached by you can find log files for both 10.8 and 10.9, as well as respective photos shooted in a multisteram channel, as mentioned above.

ncam (10.8).log ncam (10.9).log 065894d75b4256765.jpg 843240c22bda5a6a892e2.jpg

**fairbird** · May 10th 2020

Ok... in attach compress file after extract it you will find two files ...

Please test and send logo also ...

drini73 · May 10th 2020

Quote from fairbird

Ok... in attach compress file after extract it you will find two files ...
Please test and send logo also ...

Sorry @fairbird! How to test them, since I use a Zgemma H9.2h box?

**fairbird** · May 10th 2020

oh, I'm sorry I have sent to you pc file ...

Zgemma H9.2h I think 4k Armv7 ?!

In attach Test it please ...

drini73 · May 10th 2020

Quote from fairbird

oh, I'm sorry I have sent to you pc file ...
Zgemma H9.2h I think 4k Armv7 ?!

In attach Test it please ...

Yes 4k Armv7.

ncam.cortexa9hf-vfp-neon-Openssl-1.1-static file doesn't even start. No log file.

**fairbird** · May 10th 2020

Give the out put of this command

Code

opkg list openssl

Also try this option with ncam 10.9

drini73 · May 10th 2020

Quote from fairbird
Give the out put of this command
Code
opkg list openssl
Also try this option with ncam 10.9
Display More

openssl - 1.1.1g-r0 - Secure socket Layer

I can't open the links above.

Ncam Emu compiled and patched by RAED

NCam Support Forum

Participate now!

Share

Similar Threads

Ncam latest version for dreambox 800 hd se

enigma2-plugin-softcams-ncam-mips_V10.5-r2_all.ipk

Ncam with hash mode 34

AU is not going to ACTIVE modes

Ncam 10.0 compiled and patched by marouan & READ

Ncam 10.1 compiled and patched by READ

Tags

Users Viewing This Thread