Ncam Emu compiled and patched by RAED
-
- NCam RAED
- fairbird
- Thread is marked as Resolved.
-
-
I have zgemma H9twin ncam 10.9 works fine just problem CCcam.cfg not working with ncam. Please share any solution
-
Update your config from latest update you can download it from first post.
And If the issue .. Please share ncam.log from /tmp
-
ncam 10.9 x86-64 work in Ubuntu (only need to update ssl and curl)
-
Give me full log as like this see under my ubuntu 19.10
Code
Display Moreraed@fairbird:~$ ./ncam.x86_64 17:21:31 00000000 s >> NCam << cardserver log switched, version 10.9, revision r1 build 08-05-2020 (x86_64-linux-gnu-ssl) 17:21:31 00000000 s (main) System name = Linux 17:21:31 00000000 s (main) Host name = fairbird 17:21:31 00000000 s (main) Release = 5.3.0-51-generic 17:21:31 00000000 s (main) Version = #44-Ubuntu SMP Wed Apr 22 21:09:44 UTC 2020 17:21:31 00000000 s (main) Machine = x86_64 17:21:31 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 31617 17:21:31 00000000 s (emu) NCam-emu version 798 17:21:31 00000000 s (main) signal handling initialized 17:21:31 00000000 s (config) ERROR: Cannot create file "/var/tuxbox/config/ncam.srvid2.tmp" (errno=2 No such file or directory) 17:21:31 00000000 s (reader) emulator [emu] creating thread for device emulator 17:21:31 00000000 s (main) waiting for local card init 17:21:31 6ED83AA1 r (emu) Stream key delayer initialized 17:21:31 6ED83AA1 r (emu) Stream relay server initialized 17:21:31 6ED83AA1 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357) 17:21:31 00000000 (emu) INFO: FFDecsa parallel mode = 128 17:21:31 434E9846 h (webif) webif: decompressed 204252 bytes back into 466456 bytes 17:21:31 434E9846 h (webif) HTTP Server running. ip=0.0.0.0 port=8181 17:21:32 6ED83AA1 r (reader) emulator [emu] card detected 17:21:33 6ED83AA1 r (reader) emulator [emu] found card system emu 17:21:33 6ED83AA1 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 17:21:33 6ED83AA1 r (emu) Cannot open key file path: /var/tuxbox/config 17:21:33 6ED83AA1 r (emu) Cannot open key file path: /var/keys 17:21:33 6ED83AA1 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0 17:21:34 00000000 s (main) init for all local cards done 17:21:34 00000000 s (emmcache) loading emmcache disabled since no reader is using it! 17:21:34 00000000 s (emmcache) loading emmstats disabled since no reader is using it! 17:21:34 00000000 s (anticasc) anti cascading disabled 17:21:34 576135FD c (client) plain dvbapi-client granted (anonymous, au=off) 17:21:34 576135FD c (dvbapi) ERROR: Could not detect DVBAPI version.
and also please you have a look the repaly
-
my ubuntu-14.04.1
worked by ssl and curl
worked great
Code>> OSCam << cardserver log switched at Fri May 8 20:53:26 2020 ------------------------------------------------------------------------------- 2020/05/08 20:53:26 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11578-798 (x86_64-linux-gnu) 2020/05/08 20:53:26 00000000 s (main) System name = Linux 2020/05/08 20:53:26 00000000 s (main) Host name = cccam.Local.Card-System-Product-Name 2020/05/08 20:53:26 00000000 s (main) Release = 3.13.0-32-generic 2020/05/08 20:53:26 00000000 s (main) Version = #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 2020/05/08 20:53:26 00000000 s (main) Machine = x86_64 2020/05/08 20:53:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6430
-
ubuntu 14 or 15 or 19 (all same path same method)
-
The problem for sure from config files ..
Check your config files ..
Put config file in same path what I mentioned here
Ncam 10.9 compiled and patched by READ
Also WHERE is ncam.log ?!!! I have asked you to post it here ?!!
-
-
Very clear ... You need to update your openssl to 1.1
https://askubuntu.com/question…-1-1-and-libcrypto-so-1-1
Why you are still using old version of ubuntu-14.04.1 ?!!
Now Ubuntu released 20.04 ...
-
it very clear ... You need to update your openssl to 1.1
https://askubuntu.com/question…-1-1-and-libcrypto-so-1-1
Why you are still using old version of ubuntu-14.04.1 ?!!
Now Ubuntu released 20.04 ...
workss good
-
armv7 = cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
Why not read the Tivusat gold card ???
It's true @fairbird! Ncam 10.9 does not read both Tivusat and Mediaset cards.
-
with version 10.8 does it works ?!!!
And also do this config ... then test it if does not work send the log of ncam from tmp
-
with version 10.8 does it works ?!!!
And also do this config ... then test it if does not work send the log of ncam from tmp
Hi @fairbird!
Regarding Ncam 10.8 everything was fine.
As for Ncam 10.9 I did the changes you asked me to do in ncam.config (I set netprio to "0") and nothing happen. Still the same problem with Tivusat card.
Furthermore, on the contrary with what happens with Ncam 10.8, when I try to see the multistream channels (the Italian ones in satellites 9.0 E and 5.0 W) with the Ncam 10.9 it is impossible.
Attached by you can find log files for both 10.8 and 10.9, as well as respective photos shooted in a multisteram channel, as mentioned above.
ncam (10.8).log ncam (10.9).log 065894d75b4256765.jpg843240c22bda5a6a892e2.jpg
-
Ok... in attach compress file after extract it you will find two files ...
Please test and send logo also ...
-
Ok... in attach compress file after extract it you will find two files ...
Please test and send logo also ...
Sorry @fairbird! How to test them, since I use a Zgemma H9.2h box?
-
oh, I'm sorry I have sent to you pc file ...
Zgemma H9.2h I think 4k Armv7 ?!
In attach Test it please ...
-
oh, I'm sorry I have sent to you pc file ...
Zgemma H9.2h I think 4k Armv7 ?!
In attach Test it please ...
Yes 4k Armv7.
ncam.cortexa9hf-vfp-neon-Openssl-1.1-static file doesn't even start. No log file.
-
-
Display More
openssl - 1.1.1g-r0 - Secure socket Layer
I can't open the links above.
NCam Support Forum
Configs, discussion, downloads and guides for NCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!