Ncam Emu compiled and patched by RAED

There are 1,703 replies in this Thread which was already clicked 415,991 times. The last Post () by Linesman.

    any new about afn

    i use ncam on openatv 7.0 and it not open -- just blackscreen


    Code
    2022-08-26 22:52:36 4956CB41 r (emu) Find and download keys: https://www.linuxsat-support.com/thread/152939/?pageNo=4
2022-08-26 22:52:37 4956CB41 r (emu) Key loaded: P 00 736993C810C575 ### Thanks to kalkan99 ###
2022-08-26 22:52:37 4956CB41 r (emu) Key loaded: P 01 CD2DE68A9A120D ### Thanks to kalkan99 ###
2022-08-26 22:52:37 4956CB41 r (emu) ECM failed: Key not found
2022-08-26 22:52:37 4956CB41 r (emu) Key not found or invalid: P ****006D 00 (channel hash: 9798A8F2)
2022-08-26 22:52:37 4956CB41 r (emu) Key not found or invalid: P 0009FFFF 00
2022-08-26 22:52:37 4956CB41 r (emu) ECM failed: Key not found

    same on oscam !!

    • Official Post

    Our regular key poster's must be offline. The last update to the keys was 6 hours ago. They generally last about 2 hours. So as in the log key is not valid...... New key's are required

    Quote from jenseneverest

    Our regular key poster's must be offline. The last update to the keys was 6 hours ago. They generally last about 2 hours. So as in the log key is not valid...... New key's are required

    ...and the posters who are people like us, have their own life & need to eat, sleep, etc, like any other person. What they are doing for us, is by their own will.

    • Official Post
    Quote from biko

    Key now changed every seconds

    No way to open without auto roll !!

    thats not true, all you have there is a server using there own CS.

    PowerVU still works


    Code
    2022/08/27 22:42:53 664F32DC r      (emu) Key not found or invalid: P ****0068 01 (channel hash: 9798A8F2)
2022/08/27 22:42:53 664F32DC r      (emu) Key not found or invalid: P 0009FFFF 01
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0C02 PROVID: 000000 
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 17BA PROVID: 000000 
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2022/08/27 22:42:54 664F32DC r      (emu) Find and download keys: https://www.linuxsat-support.com/thread/152939/?pageNo=4
2022/08/27 22:42:54 664F32DC r      (emu) Key loaded: P 00 38B3E41A242950 ### Thanks to W@Rp ###
2022/08/27 22:42:54 664F32DC r      (emu) Key loaded: P 01 CF85F29E944828 ### Thanks to jenseneverest ###
    Quote from jenseneverest

    thats not true, all you have there is a server using there own CS.

    PowerVU still works


    Code
    2022/08/27 22:42:53 664F32DC r      (emu) Key not found or invalid: P ****0068 01 (channel hash: 9798A8F2)
2022/08/27 22:42:53 664F32DC r      (emu) Key not found or invalid: P 0009FFFF 01
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0C02 PROVID: 000000 
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 17BA PROVID: 000000 
2022/08/27 22:42:53 08193254 c   (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2022/08/27 22:42:54 664F32DC r      (emu) Find and download keys: https://www.linuxsat-support.com/thread/152939/?pageNo=4
2022/08/27 22:42:54 664F32DC r      (emu) Key loaded: P 00 38B3E41A242950 ### Thanks to W@Rp ###
2022/08/27 22:42:54 664F32DC r      (emu) Key loaded: P 01 CF85F29E944828 ### Thanks to jenseneverest ###

    Now i stopped all my paid CcCAM, have keys from ncam

    attached pic which still have different cs every several seconds !

    afn-6.jpg afn-7.jpg


    afn-8.jpg afn-9.jpg

    there is something wrong with your configs somehow.... i cant say exactly what, and TBH i use oscam emu not ncam.

    Literally i add the key to the forum and within 10 seconds afn will open...... but the problem is those that post keys also have lives....

    and keys are not as regular as we would like for watching TV, a server that opens the package is handy..... is that a free test via ncam or other ??




    222222222222222222222222.jpg

    there gonna be big changes over 121w and 133w even 125w, it seems warnerdiscovery corporation can't afford digicypher 2 and nagravision anymore that forcing them to switch into alternative encryption ...right now its open temporary until encryption adopted for their networks or they restore their access again of 133w...either-way what is happening week ago its working that gonna force warnerdiscovery networks with 50/50 chances they revert back to powervu or use newer powervu update that is harder on us to break in and cost nothing for them when replacing entire racks with powervu+ encryption that seems unreachable but we can try

    • Official Post
    Quote from Monlo

    My AFN packages not opening again with NCam and Oscar emu as I type now. Can anyone prefer solution for me. They use to open before now until few days ago....

    as in the other forum where you asked the same question.


    Quote


    You don't need to enter any keys or info for afn in sofcam.key file.

    it's useless as the ecm keys are changing every 2 hrs or so.

    you need to install this oscam "enigma2-plugin-softcams-oscam_11.711-emu-r798_IPK", or "enigma2-plugin-softcams-ncam_V13.0-r0", witch are modified to read the key posted by few nice people on the web. it's like the iks era, but is not working 24hrs, cause these persons need to sleep and/or have their personal life to manage.

    Quote from DRIVN_NeGA iX

    there gonna be big changes over 121w and 133w even 125w, it seems warnerdiscovery corporation can't afford digicypher 2 and nagravision anymore that forcing them to switch into alternative encryption ...right now its open temporary until encryption adopted for their networks or they restore their access again of 133w...either-way what is happening week ago its working that gonna force warnerdiscovery networks with 50/50 chances they revert back to powervu or use newer powervu update that is harder on us to break in and cost nothing for them when replacing entire racks with powervu+ encryption that seems unreachable but we can try

    Apparently 133w will be diched as it suffered a big blow from the sun.

    121w is also past due: was lunched in 2003 with a life span of 12 years.

    NIHIL SINE DEO !

    Edited once, last by lme ().

    thumbs up 1

    hello i have question : does ncam work on 1.9 east polaris and neosat also maybe im missing something in my configs i have original dreambox 800hd se

    30 west 0.8 west and some others work without any problem....


    Edit : Found good server and yes its working 1.9 east with NCAM.

    Also i can say that ncam is better then cccam and oscam for me now alll thing said ncam is 10000 times better for now and stable no freezein then oscam or ccccam or mgcamd for me.

    I cannot say things for other pepole but as i tested ncam is the no1 for now

    Edited once, last by DemoUser ().

    found problem with ncam maybe someone will help me...

    got another 3 vu zero original recivers

    1 of them have 8.1 openpli version i installed ncam without problem on it with the ipk file sayin installed 3 packages without anyproblem

    on seconds does not want to install saying 1 package installed and it does not show it in the softcam menu

    on the third zero he have 8.0 version openpli also does not like to install same error .

    Installed on 1 of them 8.2 version latest openpli available for vu zero does not want to install it again same error.

    its clean image.

    on the 8.2 version i installed back oscam without any problems...


    can someone help me whats the problem why ncam does not want to install....


    on my old original dreambox 800 hd se i reinstalled openpli 4 latest original 15 times on it because i was testing something and i had no problems installing the NCAM over and over again :)

    Edited once, last by DemoUser ().

NCam Support Forum

Configs, discussion, downloads and guides for NCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login