OpenATV 7.3 Python 3.11 Images

**madhouse** · Apr 5th 2023

I'm checking AIT on those channels, I don't want something malformed to arrive causing a segfault.

**madhouse** · Apr 5th 2023

I just discovered that with Smargo (smartreader) the problem doesn't occur, I don't want it to be a common problem for all boxes, could it be a sci drivers problem?

Captain

Octa8on · Apr 15th 2023

Installation went just fine but when I zap to a channel, the box freezes. tried different builds of openATV 7.2 and encountered the same problem.

box: octagon sf8008

installation on USB drive Kingston 8G

**giopet** · Apr 15th 2023

Have you install a clean Image without older settings?Have you this problem with the Metrix Skin?

Octa8on · Apr 16th 2023

Quote from giopet

Have you install a clean Image without older settings?Have you this problem with the Metrix Skin?

Yes clean installation without older settings.

It happens with the default skin which is Metrix. Do you suggest I change the skin?

**giopet** · Apr 16th 2023

Strange, because this problem I can't confirm this with all my Receivers, but if you have don't change the Skin, your problem is another one. What for channels are this, satellite channels?

Octa8on · Apr 18th 2023

Quote from giopet

Strange, because this problem I can't confirm this with all my Receivers, but if you have don't change the Skin, your problem is another one. What for channels are this, satellite channels?

Yes satellite channels, both fresh scan and ready channel lists.

**giopet** · Apr 19th 2023

Are you shure, thayou don't have a satellite reception problem? Have you this problem only with ATV 7.2?

Bcelik · Apr 19th 2023

x poster no save location

Octa8on · Apr 19th 2023

Quote from giopet

Are you shure, thayou don't have a satellite reception problem? Have you this problem only with ATV 7.2?

Yes I am sure. the problem happens only when I zap to a channel. Scan works just fine. I face this issue with OpenATV 7.2 only. Other images work very well.

samh54 · May 14th 2023

Quote from SpartacusTed

In the first 7.2 release for the Sf8008, the firmware update worked fine, so they broke something in the second release

I need some help to update firmware on my set,can you please give me some indication how you go about update python firmware from 2.7 to 3.09 and so on.Your will be great.

**abu baniaz** · May 14th 2023

Use "flash online" to flash/install ATV 7.2/7.3. Press the blue button and you should be able to see Flash online. When flashing, choose the upgrade option.

Bcelik · May 21st 2023

No save for xtraEvent v5.2 in slm openatv 7.3 for posters

luke7680 · Sep 12th 2023

Buonasera a tutti gli utenti, chi mi può seguire nell'aggiornamneto dell'immagine del decoder zgemma h11s da openatv6.2 o 6.4 devo controllare a all'ultima immagine OpenATV 7.3 Python 3.1, nel iinlk che eseguo non me la fa scaricare, poi si può fare direttamente senza cavo eternet o con pen drive nell'unità di lettura facendo reset e spegimento... da quello che spero di capire ci sono due metodi.

Volevo innanzitutto partire dall'immagine aggiornata... ma immagine e firmware sono lA stessa cosa? Scusate la poca conoscenza

**Lululla** · Sep 23rd 2023

Quote from luke7680

Buonasera a tutti gli utenti, chi mi può seguire nell'aggiornamneto dell'immagine del decoder zgemma h11s da openatv6.2 o 6.4 devo controllare a all'ultima immagine OpenATV 7.3 Python 3.1, nel iinlk che eseguo non me la fa scaricare, poi si può fare direttamente senza cavo eternet o con pen drive nell'unità di lettura facendo reset e spegimento... da quello che spero di capire ci sono due metodi.
Volevo innanzitutto partire dall'immagine aggiornata... ma immagine e firmware sono lA stessa cosa? Scusate la poca conoscenza

Hi, first of all write in English in this forum.

Let's say that in this case image is equal to firmware

I recommend a clean flash, installing ATV 7.3 from scratch and if you then want to switch to Devel, give the command via telnet

luke7680 · Sep 23rd 2023

Grazie del consiglio Lululla scriverò in iglese al prossimo post

**Lululla** · Sep 23rd 2023

Quote from luke7680

Grazie del consiglio Lululla scriverò in iglese al prossimo post

I guess you haven't learned yet... you don't have to write in Italian.

**Lululla** · Sep 24th 2023

this morning I updated my dinobot 4k mini, from the settings/software update menu

Upon reboot it went into a loop, a continuous crash

Code

root@dinobot4kmini:~# cat /etc/image-version
box_type=dinobot4kmini
build_type=
machine_brand=Vivant
machine_name=DINOBOT 4K mini
version=7.3
build=20230923
date=20230923
comment=openATV
target=9
creator=openATV
url=http://www.opena.tv
catalog=http://www.opena.tv
oever=OE-Alliance 5.3
distro=openatv
brandoem=dinobot
machinemake=dinobot4kmini
imageversion=7.3
imagebuild=20230923
imagedevbuild=001
imagetype=release
feedsurl=https://feeds2.mynonpublic.com/7.3/u53
imagedir=dinobot/u53
imagefs= dinobotemmc
mtdrootfs=mmcblk0p13
mtdkernel=mmcblk0p10
rootfile=rootfs.tar.bz2
kernelfile=kernel.bin
mkubifs=
ubinize=
driverdate=
arch=cortexa15hf-neon-vfpv4
display-type=7segment
hdmi=True
yuv=False
rca=False
av-jack=False
scart=False
scart-yuv=False
dvi=False
minitv=False
hdmi-in-hd=False
hdmi-in-fhd=False
wol=False
wwol=False
ci=False
transcoding=multitranscoding
compile-date=20230923
compile-datetime=20230923200526

Display More

crashlog

openATV Enigma2 crash log

crashdate=dom set 24 10:49:38 2023

compiledate=Sep 23 2023

skin=oZeta-FHD/skin.xml

sourcedate=2023-09-23

branch=master

rev=32634+8330064

component=Enigma2

model=u53

machinebuild=dinobot4kmini

imageversion=7.4-devel

imagebuild=20230923

kernelcmdline=console=ttyAMA0,115200 root=/dev/mmcblk0p13 rootfstype=ext4 rootwait blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),20M(recovery),2M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(fastplay),8M(ekernel),32M(loader),2950M(other1),1200M(rootfs),-(other2) coherent_pool=2M mem=1993M mmz=ddr,0,0,56M vmalloc=500M

nimsockets:

NIM Socket 0:

Type: DVB-S2

Name: DVB-S2 NIM

Frontend_Device: 0

I2C_Device: 1

NIM Socket 1:

Type: DVB-T2

Name: DVB-C,T/T2 NIM

Frontend_Device: 1

I2C_Device: 2

10:49:25.9715 [Enigma] Python path is '/usr/lib/enigma2/python'.

10:49:25.9718 [Enigma] DVB API version 5, DVB API version minor 11.

10:49:25.9718 [Enigma] Enigma debug level 3.

10:49:34.3058 File "/usr/lib/enigma2/python/StartEnigma.py", line 943, in <module>

runScreenTest() # Start running the first screen.

10:49:34.3059 File "/usr/lib/enigma2/python/StartEnigma.py", line 385, in runScreenTest

plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

10:49:34.3059 File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 60, in readPluginList

10:49:34.3060 File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import

10:49:34.3060 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:34.3060 File "<frozen importlib._bootstrap>", line 1128, in _find_and_load_unlocked

10:49:34.3061 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:34.3061 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:34.3061 File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked

10:49:34.3062 File "<frozen importlib._bootstrap>", line 690, in _load_unlocked

10:49:34.3062 File "<frozen importlib._bootstrap_external>", line 940, in exec_module

10:49:34.3062 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:34.3063 File "/usr/lib/enigma2/python/Plugins/Extensions/oZsetup/__init__.py", line 35, in <module>

language.addCallback(localeInit())

10:49:34.3063 File "/usr/lib/enigma2/python/Components/Language.py", line 34, in addCallback

10:49:34.4766 File "/usr/lib/enigma2/python/StartEnigma.py", line 943, in <module>

runScreenTest() # Start running the first screen.

10:49:34.4767 File "/usr/lib/enigma2/python/StartEnigma.py", line 385, in runScreenTest

plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

10:49:34.4768 File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 60, in readPluginList

10:49:34.4768 File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import

10:49:34.4768 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:34.4769 File "<frozen importlib._bootstrap>", line 1128, in _find_and_load_unlocked

10:49:34.4769 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:34.4769 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:34.4770 File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked

10:49:34.4770 File "<frozen importlib._bootstrap>", line 690, in _load_unlocked

10:49:34.4770 File "<frozen importlib._bootstrap_external>", line 940, in exec_module

10:49:34.4771 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:34.4771 File "/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/__init__.py", line 54, in <module>

language.addCallback(localeInit())

10:49:34.4772 File "/usr/lib/enigma2/python/Components/Language.py", line 34, in addCallback

10:49:35.6342 File "/usr/lib/enigma2/python/StartEnigma.py", line 943, in <module>

runScreenTest() # Start running the first screen.

10:49:35.6343 File "/usr/lib/enigma2/python/StartEnigma.py", line 385, in runScreenTest

plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

10:49:35.6343 File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 60, in readPluginList

10:49:35.6344 File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import

10:49:35.6344 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.6344 File "<frozen importlib._bootstrap>", line 1128, in _find_and_load_unlocked

10:49:35.6345 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.6345 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.6345 File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked

10:49:35.6346 File "<frozen importlib._bootstrap>", line 690, in _load_unlocked

10:49:35.6346 File "<frozen importlib._bootstrap_external>", line 940, in exec_module

10:49:35.6346 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.6347 File "/usr/lib/enigma2/python/Plugins/Extensions/WeatherPlugin/__init__.py", line 20, in <module>

language.addCallback(localeInit())

10:49:35.6347 File "/usr/lib/enigma2/python/Components/Language.py", line 34, in addCallback

10:49:35.7015 File "/usr/lib/enigma2/python/StartEnigma.py", line 943, in <module>

runScreenTest() # Start running the first screen.

10:49:35.7016 File "/usr/lib/enigma2/python/StartEnigma.py", line 385, in runScreenTest

plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

10:49:35.7016 File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 60, in readPluginList

10:49:35.7017 File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import

10:49:35.7017 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.7017 File "<frozen importlib._bootstrap>", line 1128, in _find_and_load_unlocked

10:49:35.7018 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.7018 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.7018 File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked

10:49:35.7019 File "<frozen importlib._bootstrap>", line 690, in _load_unlocked

10:49:35.7019 File "<frozen importlib._bootstrap_external>", line 940, in exec_module

10:49:35.7019 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.7020 File "/usr/lib/enigma2/python/Plugins/Extensions/RakutenTV/__init__.py", line 48, in <module>

language.addCallback(localeInit())

10:49:35.7020 File "/usr/lib/enigma2/python/Components/Language.py", line 34, in addCallback

10:49:35.7666 File "/usr/lib/enigma2/python/StartEnigma.py", line 943, in <module>

runScreenTest() # Start running the first screen.

10:49:35.7667 File "/usr/lib/enigma2/python/StartEnigma.py", line 385, in runScreenTest

plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))

10:49:35.7667 File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 60, in readPluginList

10:49:35.7667 File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import

10:49:35.7668 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.7668 File "<frozen importlib._bootstrap>", line 1128, in _find_and_load_unlocked

10:49:35.7668 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.7669 File "<frozen importlib._bootstrap>", line 1178, in _find_and_load

10:49:35.7669 File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked

10:49:35.7669 File "<frozen importlib._bootstrap>", line 690, in _load_unlocked

10:49:35.7670 File "<frozen importlib._bootstrap_external>", line 940, in exec_module

10:49:35.7670 File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed

10:49:35.7670 File "/usr/lib/enigma2/python/Plugins/Extensions/PlutoTV/__init__.py", line 54, in <module>

language.addCallback(localeInit())

10:49:35.7671 File "/usr/lib/enigma2/python/Components/Language.py", line 34, in addCallback

dmesg

<4>hdmi_cec_release

<6>usb 5-1: USB disconnect, device number 4

<6>usb 5-1: new high-speed USB device number 5 using xhci-hcd

<4>videomode-->720p

<4>hisi com_size 100

<4>mmap is called now and the start is 0xaecfc000 the size is 0x801000, offset is 0x0

<4>videomode_preferred setting

<4>yyyyyyyyyyyyyyyyy

<4>-->video start

<4>RTW: module init start

<4>RTW: rtl88x2bu v5.1.7_19806.20161025_BTCOEX20161024-3333

<4>RTW: build time: Jul 2 2019 11:59:13

<4>RTW: rtl88x2bu BT-Coex version = BTCOEX20161024-3333

<4>------------[ cut here ]------------

<6>Bluetooth: hci0: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822

<6>Bluetooth: rtl: assuming no firmware upload needed.

<4>WARNING: CPU: 1 PID: 3843 at /home/oe1/www/atv7.3/build-enviroment/builds/openatv/release/u53/tmp/work-shared/u53/kernel-source/fs/proc/generic.c:344 proc_register.part.0+0x100/0x154()

<4>proc_dir_entry 'net/rtl88x2bu' already registered

<4>Modules linked in: rtl8822bu(+) 88x2bu(O) rtk_8822btusb firedtv(O) hidemux(PO) dvb_core(O) tntfs(PO) hi_pmoc hi_vi hi_sci hi_keyled(O) hi_aenc hi_venc hi_advca hi_png hi_jpge hi_jpeg hi_ir hi_dbe mali_kbase hi_fb hi_tuner(O) hi_mce hi_sync(O) hi_aiao hi_adsp hi_vdec hi_vpss hi_vfmw hi_adec hi_demux hi_otp hi_tde hi_i2c hi_gpio_i2c hi_gpio ftdi_sio usbserial hi_vou hi_hdmi hi_cipher hi_pq hi_pdm hi_common hi_mmz hi_media xhci_plat_hcd xfs libcrc32c ohci_platform ehci_platform cfg80211

<4>CPU: 1 PID: 3843 Comm: modprobe Tainted: P W O 4.4.35 #1

<4>Hardware name: bigfish

<4>[<c0020958>] (unwind_backtrace) from [<c001aca0>] (show_stack+0x20/0x24)

<4>[<c001aca0>] (show_stack) from [<c03c2974>] (dump_stack+0x88/0x9c)

<4>[<c03c2974>] (dump_stack) from [<c002e600>] (warn_slowpath_common+0x94/0xc4)

<4>[<c002e600>] (warn_slowpath_common) from [<c002e670>] (warn_slowpath_fmt+0x40/0x48)

<4>[<c002e670>] (warn_slowpath_fmt) from [<c01a454c>] (proc_register.part.0+0x100/0x154)

<4>[<c01a454c>] (proc_register.part.0) from [<c01a4808>] (proc_mkdir_data+0x9c/0xbc)

<4>[<c01a4808>] (proc_mkdir_data) from [<bf89b188>] (rtw_drv_proc_init+0x54/0x128 [rtl8822bu])

<4>[<bf89b188>] (rtw_drv_proc_init [rtl8822bu]) from [<be800094>] (rtw_drv_entry+0x94/0x118 [rtl8822bu])

<4>[<be800094>] (rtw_drv_entry [rtl8822bu]) from [<c00097d8>] (do_one_initcall+0xd0/0x224)

<4>[<c00097d8>] (do_one_initcall) from [<c00ac618>] (do_init_module+0x74/0x220)

<4>[<c00ac618>] (do_init_module) from [<c00ae67c>] (load_module+0x1e48/0x25d8)

<4>[<c00ae67c>] (load_module) from [<c00af048>] (SyS_finit_module+0xa4/0xdc)

<4>[<c00af048>] (SyS_finit_module) from [<c0015d80>] (ret_fast_syscall+0x0/0x3c)

<4>---[ end trace 4a08f85a7a696b7e ]---

<4>------------[ cut here ]------------

<4>WARNING: CPU: 1 PID: 3843 at /home/debian_usr/src/HiSTBLinuxV100R005C00SPC060/source/kernel/linux-4.4.y/drivers/wifi/usb_rtl8822bu/rtl88x2BU_WiFi_linux_v5.1.7_19806.20161025_BTCOEX20161024-3333/os_dep/linux/rtw_proc.c:254 rtw_drv_proc_init+0x70/0x128 [rtl8822bu]()

<4>Modules linked in: rtl8822bu(+) 88x2bu(O) rtk_8822btusb firedtv(O) hidemux(PO) dvb_core(O) tntfs(PO) hi_pmoc hi_vi hi_sci hi_keyled(O) hi_aenc hi_venc hi_advca hi_png hi_jpge hi_jpeg hi_ir hi_dbe mali_kbase hi_fb hi_tuner(O) hi_mce hi_sync(O) hi_aiao hi_adsp hi_vdec hi_vpss hi_vfmw hi_adec hi_demux hi_otp hi_tde hi_i2c hi_gpio_i2c hi_gpio ftdi_sio usbserial hi_vou hi_hdmi hi_cipher hi_pq hi_pdm hi_common hi_mmz hi_media xhci_plat_hcd xfs libcrc32c ohci_platform ehci_platform cfg80211

<4>CPU: 1 PID: 3843 Comm: modprobe Tainted: P W O 4.4.35 #1

<4>Hardware name: bigfish

<4>[<c0020958>] (unwind_backtrace) from [<c001aca0>] (show_stack+0x20/0x24)

<4>[<c001aca0>] (show_stack) from [<c03c2974>] (dump_stack+0x88/0x9c)

<4>[<c03c2974>] (dump_stack) from [<c002e600>] (warn_slowpath_common+0x94/0xc4)

<4>[<c002e600>] (warn_slowpath_common) from [<c002e6ec>] (warn_slowpath_null+0x2c/0x34)

<4>[<c002e6ec>] (warn_slowpath_null) from [<bf89b1a4>] (rtw_drv_proc_init+0x70/0x128 [rtl8822bu])

<4>[<bf89b1a4>] (rtw_drv_proc_init [rtl8822bu]) from [<be800094>] (rtw_drv_entry+0x94/0x118 [rtl8822bu])

<4>[<be800094>] (rtw_drv_entry [rtl8822bu]) from [<c00097d8>] (do_one_initcall+0xd0/0x224)

<4>[<c00097d8>] (do_one_initcall) from [<c00ac618>] (do_init_module+0x74/0x220)

<4>[<c00ac618>] (do_init_module) from [<c00ae67c>] (load_module+0x1e48/0x25d8)

<4>[<c00ae67c>] (load_module) from [<c00af048>] (SyS_finit_module+0xa4/0xdc)

<4>[<c00af048>] (SyS_finit_module) from [<c0015d80>] (ret_fast_syscall+0x0/0x3c)

<4>---[ end trace 4a08f85a7a696b7f ]---

<3>Error: Driver 'rtl88x2bu' is already registered, aborting...

<4>hdmi_cec_open 0

<4>RTW: module init ret=-16

<7>(NULL device *): dvb_frontend_open:

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 5, V3 type: 0

<7>(NULL device *): dvb_frontend_release:

<7>(NULL device *): dvb_frontend_open:

<7>(NULL device *): dvb_frontend_start:

<7>(NULL device *): dvb_frontend_ioctl: (83)

<7>(NULL device *): dvb_frontend_thread:

<7>(NULL device *): dvb_frontend_init: initialising adapter 0 frontend 0 (DVB-S2 NIM)...

<4>dvbs: init chip 0xdee6b004 tunerid:0

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 1

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef5d8

<7>(NULL device *): dtv_property_dump: tvp.cmd = 0x00000023 (DTV_API_VERSION)

<7>(NULL device *): dtv_property_dump: tvp.u.data = 0x0000050a

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 5, V3 type: 0

<7>(NULL device *): dvb_frontend_ioctl: (83)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 1

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef5d8

<7>(NULL device *): dtv_property_dump: tvp.cmd = 0x0000002c (DTV_ENUM_DELSYS)

<7>(NULL device *): dtv_property_dump: tvp.u.data = 0x00000605

<7>(NULL device *): dvb_frontend_ioctl: (82)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 2

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef500

<7>(NULL device *): dvb_frontend_clear_cache: Clearing cache for delivery system 5

<7>(NULL device *): dvbv5_set_delivery_system: Changing delivery system to 6

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 6, V3 type: 0

<7>(NULL device *): dvb_frontend_ioctl: (82)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 2

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef500

<7>(NULL device *): dvb_frontend_clear_cache: Clearing cache for delivery system 6

<7>(NULL device *): dvbv5_set_delivery_system: Changing delivery system to 5

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 5, V3 type: 0

<7>(NULL device *): dvb_frontend_ioctl: (66)

<4>dvbs_set_tone 1

<7>(NULL device *): dvb_frontend_ioctl: (68)

<7>(NULL device *): dvb_frontend_ioctl: (67)

<4>dvbs_set_voltage: 2

<7>(NULL device *): dvb_frontend_ioctl: (66)

<4>dvbs_set_tone 1

<7>(NULL device *): dvb_frontend_ioctl: (68)

<7>(NULL device *): dvb_frontend_ioctl: (67)

<4>dvbs_set_voltage: 2

<7>(NULL device *): dvb_frontend_release:

<4>dvbs_set_voltage: 2

<7>(NULL device *): dvb_frontend_open:

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 3, V3 type: 2

<7>(NULL device *): dvb_frontend_release:

<7>(NULL device *): dvb_frontend_open:

<7>(NULL device *): dvb_frontend_start:

<7>(NULL device *): dvb_frontend_ioctl: (83)

<7>(NULL device *): dvb_frontend_thread:

<7>(NULL device *): dvb_frontend_init: initialising adapter 0 frontend 1 (DVB-C,T/T2 NIM)...

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 1

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef5d8

<7>(NULL device *): dtv_property_dump: tvp.cmd = 0x00000023 (DTV_API_VERSION)

<7>(NULL device *): dtv_property_dump: tvp.u.data = 0x0000050a

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 3, V3 type: 2

<7>(NULL device *): dvb_frontend_ioctl: (83)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 1

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef5d8

<7>(NULL device *): dtv_property_dump: tvp.cmd = 0x0000002c (DTV_ENUM_DELSYS)

<7>(NULL device *): dtv_property_dump: tvp.u.data = 0x00011003

<7>(NULL device *): dvb_frontend_ioctl: (82)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 2

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef500

<7>(NULL device *): dvb_frontend_clear_cache: Clearing cache for delivery system 3

<7>(NULL device *): dvbv5_set_delivery_system: Changing delivery system to 1

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 1, V3 type: 2

<7>(NULL device *): dvb_frontend_ioctl: (82)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 2

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef500

<7>(NULL device *): dvb_frontend_clear_cache: Clearing cache for delivery system 1

<7>(NULL device *): dvbv5_set_delivery_system: Changing delivery system to 16

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 16, V3 type: 2

<7>(NULL device *): dvb_frontend_ioctl: (82)

<7>(NULL device *): dvb_frontend_ioctl_properties:

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.num = 2

<7>(NULL device *): dvb_frontend_ioctl_properties: properties.props = be3ef500

<7>(NULL device *): dvb_frontend_clear_cache: Clearing cache for delivery system 16

<7>(NULL device *): dvbv5_set_delivery_system: Changing delivery system to 3

<7>(NULL device *): dvb_frontend_ioctl: (61)

<7>(NULL device *): dvb_frontend_ioctl_legacy: current delivery system on cache: 3, V3 type: 2

<7>(NULL device *): dvb_frontend_ioctl: (68)

<7>(NULL device *): dvb_frontend_ioctl: (67)

<4>[12:30:52:006 ERROR-HI_TUNER]:AVL68XX_AntennaPower[647]:Avl68xx::Antennapower{0,1}

<7>(NULL device *): dvb_frontend_ioctl: (68)

<7>(NULL device *): dvb_frontend_ioctl: (67)

<4>[12:30:52:015 ERROR-HI_TUNER]:AVL68XX_AntennaPower[647]:Avl68xx::Antennapower{0,1}

<7>(NULL device *): dvb_frontend_release:

<4>[12:30:52:029 ERROR-HI_TUNER]:AVL68XX_AntennaPower[647]:Avl68xx::Antennapower{0,1}

<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)

<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"

<7>yaffs: yaffs: MTD device 1 either not valid or unavailable

<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"

<7>yaffs: yaffs: MTD device 1 either not valid or unavailable

<6>tntfs info (device mmcblk0p1, pid 3866): ntfs_fill_super(): fail_safe is enabled.

<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)

<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"

<7>yaffs: yaffs: MTD device 3 either not valid or unavailable

<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"

<7>yaffs: yaffs: MTD device 3 either not valid or unavailable

<6>tntfs info (device mmcblk0p3, pid 3905): ntfs_fill_super(): fail_safe is enabled.

<4>UDF-fs: warning (device mmcblk0p4): udf_fill_super: No partition found (2)

<6>yaffs: dev is 187695108 name is "mmcblk0p4" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.4,"mmcblk0p4"

<7>yaffs: yaffs: MTD device 4 either not valid or unavailable

<6>yaffs: dev is 187695108 name is "mmcblk0p4" rw

<6>yaffs: passed flags ""

<7>yaffs: yaffs: Attempting MTD mount of 179.4,"mmcblk0p4"

<7>yaffs: yaffs: MTD device 4 either not valid or unavailable

<6>tntfs info (device mmcblk0p4, pid 3944): ntfs_fill_super(): fail_safe is enabled.

<4>policy in setting-->panscan

<4>policy2 in setting-->letterbox

<4>power_status :on

<4>write_proc_show_symbols -->1

<4>[12:31:01:282 FATAL-HI_TDE]:TdeOsiListSubmitJob[759]:handle:1078 interrupt!

have idea??

Captain

**acypaczom** · Sep 24th 2023

Lululla it looks like skin compatibility problem. 7.4 dev has something i saw few days ago.

So for some time You have to rename oZeta-FHD folder to oZeta-FHD.org

Schpountz · Sep 24th 2023

I have install openatv 7.3 on my dm920

When i enter to plugin list i have only red button... No green or yellow button to install new extension from feed

Any help..

Thanks

OpenATV 7.3 Python 3.11 Images

OpenATV Team Images Support Forum ~ based on OE-Alliance

Participate now!

Share

Similar Threads

περι SatDreamGr

E2m3u2bouquet - discussion & support

Tags