What about trying to update your channel list?
Maybe the frequences have changed a while now?
Just a wild guess.
What about trying to update your channel list?
Maybe the frequences have changed a while now?
Just a wild guess.
Thanks, that was list :)
Hat jemand schon Siy IT damit geschaut?
i will try and take a screen shot,ow
Regarding the necessary changes to the image and channel list i never knew I had too?
What changes do have to make and how?
I was on the understanding that one has to load the ipk file and it loads the script and all files needed, all i need to do is add in the providers oscam.server file?
Have you read the following thread? If you have not, please read it then ask questions if you still have problems
ThreadEverything you need for ICAM - Sky ITALIA, Sky UK & SKY DE - All Enigma2 Images and ReceiversIts now possible to view Sky Germany, Italia, and UK channels with NCam or OSCam that has an ICam patch along with a custom streamrelay channel list.
First thing you need to do is install either NCam or OSCam. Both are configured exactly the same way.
These files come with everything already pre-configured for ICAM .
No other edits are required, just add your reader to ncam.server or oscam.server. Configs are found in /etc/tuxbox/config
OSCam for All E2 Devices & Images .ipk (OSCam for Sky DE, IT …
I have done the following:
Installed the OSCAM Icam patch with all the preconfigured settings as advised in the original thread . All on the latest image of openvix.
Do I now add the Modified streamrelay bouquets in etc, enigma2 ?
And then add optinal .tv files if I want to kinal keep the originbal sat channel list ?
Is the above all I have to do?
I don't know for definite what you mean by "latest", but let's assume it is 6.4 010.
I would just import the streamrelay_whitelist file, that way you don't need modified bouquets. For the UK I would also run ABM as SD custom region. This will update that file too. There is a stuck thread with the command to fetch it from Biko GitHub
So I should add the files as below looking at the last thread on that post :
whitelist_streamrelay.sh goes in usr/script
whitelist_streamrelay.py goes in etc/enigma2
Then reboot and run ABM as custom region for UK
Dose all the above apply to SLY Germany and Italy too Assuming I would need to apply the custom region in ABM for those countries
tested on uk sky action get blank screen.
The log is showing "Rejected" error on all UK channels, meaning all the servers are rejecting the request.
There is also "login failed, usr/pwd invalid" errors, so you need to pay attention to whether you are using the correct details.
Display MoreI have been going thru all the posts, can someone point me in the right direction of how to install oscam/icam on open vix and files needed?
Use the ipk file from the first post ~ enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk it has all the files needed.
My understandng is that its now a script method which may have been updated?
Is it the same method and files for Open Black Hole as well?Am i right in saying that I need to upload a icam channle list as OSCAM it self will not work on icam?
Stream relay bouquets/channel lists are not needed on the latest builds of all "Open - OE-Alliance" images.
Threadwhitelist_streamrelay: Script to fetch file - BikoHopefully somebody will host a file that is maintained and a script/plugin to fetch it can be made.
Edit:
As I have moved the posts below into a new thread, this is for people using the new function where stream relay bouquets are not needed. See this thread:
linuxsat-support.com/thread/156468/
Applies to OpenPLI Nightly (developer image). The function is not available in OpenPLI 9.0
Also applies to
OpenBlackhole 5.3 009 and newer
OpenViX 5.3.008 and newer
OpenATV 7.3 (7th December 2023 and newer)
Hi Master G.
so from your post above if you are running Open ATV7.4 - all you need to do is FTP the above OSCAM and add your line details to the server file and the sly channels will clear?
if you are running Open ATV7.4 all you need to do is
1. Install oscam icam from the first post.
2. Add the whitelist_streamrelay files to the image.
3. Add your details to oscam.server.
4. Use any regular satellite channel list or AutobouquetsMaker plugin.
Note - this will only work on the latest builds of Open / OE-Alliance images.
If you are using any image that was built before November 2023 then you must follow the regular steps to configure stream relay.
To fetch the whitelist from Biko's github, just paste this command.
[ ! -d "/etc/enigma2/whitelist_streamrelay" ] && wget -O /etc/enigma2/whitelist_streamrelay https://raw.githubusercontent.com/biko-73/OsCam_EMU/main/whitelist_streamrelay
Display Moreif you are running Open ATV7.4 all you need to do is
1. Install oscam icam from the first post.
2. Add the whitelist_streamrelay files to the image.
3. Add your details to oscam.server.
4. Use any regular satellite channel list or AutobouquetsMaker plugin.
Note - this will only work on the latest builds of Open / OE-Alliance images.
If you are using any image that was built before November 2023 then you must follow the regular steps to configure stream relay.
Thanks Friend, How do I see the build date?
Thanks Friend, How do I see the build date?
Manu > Information > About
(might be slightly different on other images)
Applies to OpenPLI Nightly (developer image) since 13 Oct 2023. The function is not available in OpenPLI 9.0
Also applies to
OpenBlackhole 5.3 009 and newer
OpenViX 5.3.008 and newer
OpenATV 7.3 (7th December 2023 and newer)
When using Bikos fetch command dose one still need to this?
Code
When using Bikos fetch command dose one still need to this?
No, i think i was clear that you don`t need to use a stream relay channel list when using the latest image builds.
Display Moreif you are running Open ATV7.4 all you need to do is
1. Install oscam icam from the first post.
2. Add the whitelist_streamrelay files to the image.
3. Add your details to oscam.server.
4. Use any regular satellite channel list or AutobouquetsMaker plugin.
Note - this will only work on the latest builds of Open / OE-Alliance images.
If you are using any image that was built before November 2023 then you must follow the regular steps to configure stream relay.
Worked a treat
Is there a diffrence in quality in picture and sound on sly icam service compared to viewing it on IPTV as they are both streams so would assume both would be simiilar depending on providers server and type of box one would use?
Its quality of life
Don’t have an account yet? Register yourself now and be a part of our community!