Bouquet Maker Xtream - IPTV Bouquet Maker (new 2023)

There are 1,373 replies in this Thread which was already clicked 441,828 times. The last Post () by tommiedepommie.

    Quote from mondragon84

    why is it a mistake? So far, beside the issue mentioned with jedimaker, i havent identified any other issues. Anything specific you are referring to which it should explicitely check? If i install bouqetmaker, Shall i first delete the still available bouqet previously created with jedi?

    You wont find jedimaker in feeds it is no longer developed, and even openatv team advise not to restore settings from 6 to 7 and I also think jedimaker and BMX bouquets are in different format.

    To answer some questions.

    Series. (again)...

    1) A lot of providers especially the big chinese providers have stopped the get.php call. This is what is used for series.

    Try your get,php full url in a browser, if it doesn't downloaded anything, then you wont get series for that provider.

    If you do get a playlist from the get.php....

    2) Series are very large nowadays. There is a hell of a lot of processing done to make series bouquets. It has to read millions of lines of data, it has to process that data into groups and streams. Its very memory heavy and despite me trying for years trying to get this work without your enimga2 box curling over,dying and running out of memory its a battle I am not going to win.

    3) Don't select all series. Try selecting just a couple of series and then see if it creates bouquets. If it does, then its purely down to a size issue and user error by not selecting a few series to create bouquets for.

    4) Use an iptv player for series instead of a bouquet maker. The iptv players are step by step so have no problem with series data as it only brings back what it has to at each level.


    JediMakerXtream - Can be found on this forum here.

    pasted-from-clipboard.png

    Its no longer in any feeds as its no longer public on my github. (although its still on github for me privately.)
    BouquetMakerXtream is the new version of Jedi. Jedi was too complicated, old code and I killed it off as it was hell to maintain.
    Do I recommend JediMakerXtream - No. Will I offer any support for people that still use it. No.
    If you want to still use it, then it is what it is.

    ** A person who feels appreciated will always do more than what is expected **

    clapping hands 1 thumbs up 3 Thanks 1 Sad 2

    bouquet maker xstream: newest openatv feed version


    hello guys,
    first of all thnx KiddaC for ur hard work to develop this plugin



    i got an strange problem if i refresh some iptv channels and add/remove some, on my playlist'
    then sometimes after update some channels appear which i've never selected.


    does s.o have simiilar issues ?


    regards

    Edited once, last by fsky1 ().

    That is correct if provider adds new categories or channels they are added so you know changes in playlist if you do not want them then just edit again.

    Or if that bothered then use an playlist editor then only categories or channels you want are downloaded to BMX I use one called iptveditor but it is not free but you can try a trial.

    Quote from urie

    That is correct if provider adds new categories or channels they are added so you know changes in playlist if you do not want them then just edit again.

    ah ok, didnt know this , so its not possible with bouquetmaker to exclude these if u update ur playlist.


    Quote from urie

    I use one called iptveditor but it is not free but you can try a trial.

    Nah, i prefer on Board solutions.

    But thnx for the recommendation


    Regards

    Edited 2 times, last by fsky1 ().

    If you read back a few pages this has already been discussed.

    I am getting a problem when trying to do recordings with BMX, previously I had no problem if I was recording on the same channel as I was watching. Now I am getting an error "No tuner is available for recording a timer!" this even happens when the receiver is in standby. Any ideas please?

    Quote from jazzyman

    I am getting a problem when trying to do recordings with BMX, previously I had no problem if I was recording on the same channel as I was watching. Now I am getting an error "No tuner is available for recording a timer!" this even happens when the receiver is in standby. Any ideas please?

    Are you sure it is not your setup if iptv you may need multiroom connection if trying to record and watch same channel also what is streamtype , what device what image.


    Edit : it is working for me on openatv 7.6 , gigablue quad pro with multiroom account while watching channel or when i go to other channel same provider but if i try to record from another provider with single connection not multiroom i can only record if i start recording then go to another channel not one from same provider.

    how do you know you are getting this error if you are in standby :person shrugging:
    No tuner is available for recording a timer!

    But yes - as urie quotes, if you only got 1 line, and not multiroom, you can't watch a channel and record at the same time from the same iptv provider. They are both classed as active connections.

    Stick your box on a satellite channel, before standby - if you got timed iptv recordings.

    ** A person who feels appreciated will always do more than what is expected **

    Hi, I know this may have been asked before but I cannot find anything. I have several images on my vu+solo4k using the built in multi boot and instead of having to set up each ones bouquets (included/excluded) Individually what files would I need to copy manually between images or which files to symlink. Same for setup files files.

    Quote from tbe

    Hi, I know this may have been asked before but I cannot find anything. I have several images on my vu+solo4k using the built in multi boot and instead of having to set up each ones bouquets (included/excluded) Individually what files would I need to copy manually between images or which files to symlink. Same for setup files files.

    your probable just as quick just copying /etc/enigma2/bouquetmakerxtream folder and replacing one made when you have installed BMX .

    same with epgimport

    there is also epgimport.conf in /etc/enigma2/ folder

    and /etc/enigma2/epgimport folder


    as for bouquets you can use openwebif and go to its bouquets editor and export bouquets file and you can copy and import that on each image.


    Capture.PNG



    but there is also bmx and epg import settings in /etc/enigma2/ settings file.

    that is different thing you could copy settings file to laptop and try adding settings to settings file but that requires terminal init 4 then edit file then init 3 to restart enigma2 .


    Personally when working on other images i just copy BMX and xstreamity playlists file and setup again. I keep a folder on laptop with pictures of my used plugins setup screens.

    ABM , BMX, XStreamity , Epgimport, FBC tuners, e.t.c.

    Quote from KiddaC

    how do you know you are getting this error if you are in standby :person shrugging:
    No tuner is available for recording a timer!

    But yes - as urie quotes, if you only got 1 line, and not multiroom, you can't watch a channel and record at the same time from the same iptv provider. They are both classed as active connections.

    Stick your box on a satellite channel, before standby - if you got timed iptv recordings.

    It's not in standby I have the epg screen displaying, select a programme that is currently running and the warning "No tuner is available for recording a timer!"


    If I set the timer for a later iptv programme, nothing records even if the receiver is set on a default satellite terrestrial channel.


    Previously I had no problems and recordings worked with a single line perhaps I will have to have a multi-room connection instead?


    Receiver is a PULSe 4K, OPENATV 7.6, and the default live stream on BMX is IPTV(4097)

    First of all, thank you very much for this handy plugin. Unfortunately, I own a Dreambox DM900, on which the BMX works, but I just can’t seem to get the EPG to work. I’m using DreamOS with GP4.2. I’m actually quite happy with the DM900, but unfortunately it’s no longer being developed. I’ve read through this thread from start to finish but haven’t found a solution. EPG Importer is also installed and imports the BMX EPG data. However, no EPG is displayed in the BMX bouquets.

    Quote from KiddaC

    copy etc/enigma2/bmx folder.adjust your main settings again. And just run bmx again. Not worth the hassle of copying over settings and epgimporter files its quicker to just do above.

    Hi KiddaC, so there is no place where the shown or hidden bouquets information is stored to allow quick access to copy for bmx, xstreamity or estalker as it takes along time, for me anyway, to redo these everytime I install another image using Kexec Multiboot on my vu+solo4k or even to make a backup to just copy back if a re-flash is required. Thanks as usual regardless of the response

    Quote from tbe
    Quote from KiddaC

    copy etc/enigma2/bmx folder.adjust your main settings again. And just run bmx again. Not worth the hassle of copying over settings and epgimporter files its quicker to just do above.

    Hi KiddaC, so there is no place where the shown or hidden bouquets information is stored to allow quick access to copy for bmx, xstreamity or estalker as it takes along time, for me anyway, to redo these everytime I install another image using Kexec Multiboot on my vu+solo4k or even to make a backup to just copy back if a re-flash is required. Thanks as usual regardless of the response

    That is the same for everyone if setting up different images where normal settings can not be restored between them i,e, openvix to openatv but you can copy bmx, xstreamity or estalker folders over. then once setup you must be able to backup settings on each image and also restore them. the settings for them are stored in playlist.json files.

    Quote from Diabollo

    First of all, thank you very much for this handy plugin. Unfortunately, I own a Dreambox DM900, on which the BMX works, but I just can’t seem to get the EPG to work. I’m using DreamOS with GP4.2. I’m actually quite happy with the DM900, but unfortunately it’s no longer being developed. I’ve read through this thread from start to finish but haven’t found a solution. EPG Importer is also installed and imports the BMX EPG data. However, no EPG is displayed in the BMX bouquets.

    in epgimporter make sure you have settings set as in image.

    Capture.PNG


    And do you actually have epg from provider does it work on other devices.

    if not you could try jedi-epg-xtream

Enhance your Enigma2 with KiddaC's creations

Download HD skins, IPTV players (X-Streamity, EStalker), bouquet tools, picon managers, and essential plugins for a complete setup. KiddaC's Enigma2 resources: skins (slyk, v-skin, onyx), IPTV plugins (Xtreamity, Jedi Maker), and utilities (E2Piconizer, ScreenNames) for customization and control.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login