Need help setting up Ubuntu-oscam-CCcam2.1.3-portforwarding

There are 34 replies in this Thread which was already clicked 4,180 times. The last Post () by master G.

    Great reply.well thats good to know i might bring it all here then.
    Ive done allot of reading today about static ip and do understand now why we have to do this. i just need to get time to have another go.
    Ive installed putty and the other programmes mentioned onto this pc so there ready.
    ive found another way of setting the static ip address that i think i will try which is by using cmd ipconfig/all through control panell and adapter settings in windows.

    sounds messy to say the least, here is a link to someone with a similar problem.


    Id stick with it and address the problem with the router, as it may be nackerd


    Code
    http://www.***user.co.uk/forum/***-router/36027-dg934g-port-forwarding-struggling-utorrent-after-moving-***.html


    Someone suggested post screenshots of the settings, this would be your best way forward.


    Edit *** = s k y


    I am not obligated, or connected to any particular brand, seller or retailer so any opinions given are not biased in anyway.
    Any information given is for hobby and research purposes only, and whilst every effort is made to ensure that all my responses are accurate, - Any action you may take based on my replies is done so at your own risk.
    Viewing Premium Channels or Media, without paying for them is illegal and if you do so, you do so at your own risk!

    BpGgW.jpg



    dont know if i should just go get the lot and set up from home i have vm 20mpbs and relitive has sly with probs much less. meant to ask about the internet speeds and what impact it has on the home network.

    Are you still running the server wired or wireless?


    I am not obligated, or connected to any particular brand, seller or retailer so any opinions given are not biased in anyway.
    Any information given is for hobby and research purposes only, and whilst every effort is made to ensure that all my responses are accurate, - Any action you may take based on my replies is done so at your own risk.
    Viewing Premium Channels or Media, without paying for them is illegal and if you do so, you do so at your own risk!

    BpGgW.jpg



    Quote from birdman99

    its going to be wired


    But isn't right now? I had issues with DHCP Reservation and wireless connections on my VM, to be honest the routers provided by both Virmin and s*y are pants.


    I bought one from second hand shop for a fiver flashed DD-WRT on it and never looked back.


    Anyway your reservations should look like this -


    Files

    6e60a53d1fc7dab45fbd91f.jpg 37.15 kB – 37 Downloads


    I am not obligated, or connected to any particular brand, seller or retailer so any opinions given are not biased in anyway.
    Any information given is for hobby and research purposes only, and whilst every effort is made to ensure that all my responses are accurate, - Any action you may take based on my replies is done so at your own risk.
    Viewing Premium Channels or Media, without paying for them is illegal and if you do so, you do so at your own risk!

    BpGgW.jpg



    Hi guys am new on this please be easy on I done everything according to the tutorial but now where will I go from their how do I make my server visible to my friend the other end am lost since I got everything running without any problem please help thanks

    Ok dudes, ive set the static ip so that seems to be working.
    ive Managed to get quite far
    ive installed the scripts and just need to know how to test to see if i can reach the server as i dont understand the port numbers and if i have to assign some ports.
    Im now trying to set the omnikey up ??
    the tutorial says "And change thise lines by removing # from front and reader_drivers lines u delete one comand too:
    reader_drivers = pcsc, ctapi;
    try_emulation_first = yes;
    lock_login = false;
    provider_library = /lib/libpcsclite.so.1

    cant see #
    and delete one command ????

    Quote

    Hi guys am new on this please be easy on I done everything according to the tutorial but now where will I go from their how do I make my server visible to my friend the other end am lost since I got everything running without any problem please help thanks


    Now you have to configure your Smart Card Reader, wether it is a Smargo, Omnikey or box.
    Then you have to configure your cccam & oscam to your Subscription Setup. I will put links at the bottom of the original tutorial to point you in the right direction...




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.


    You are getting there m8.. But I think you should be starting new threads for support. This tutorial is just to set up ubuntu server with cccam/oscam. There are hundreds of variations of card readers & Satellite subs so I cant cover them all. You are going to have to look for help on the forum and start your own threads if you are still stuck.


    Check links at the bottom of orig tut in about half hour..


    Good luck




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    shall i do that and then you can them links you mentioned to a new post that way other people will come across it easier when going through same things??

    Evening all, with the thanks of this forum i think i am nearly done.still cant see anything on the card. can get into oscam but cant get into cccam using webif.
    think there is something daft wrong somewhere. Any ideas. ???

    • Official Post

    Try using this tool for accessing CCcaminfo HERE - CS Studio by Damirsat ( CCcam Info ).


    Open CS Studio and click the


    Enter the Web ip, username, password and port, then click add and restart CS Studio, this info can be found in CCcam.cfg


    Code
    WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
WEBINFO LISTEN PORT : 16001



    Its possible you need to restart CCcam from terminal/putty, all the commands you need are HERE - Usefull Ubuntu OScam CCcam Commands.

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login