cant get smartgo to be seen??

  • seamouse
  • Closed
  • Thread is marked as Resolved.

There are 67 replies in this Thread which was already clicked 4,694 times. The last Post () by mrgmx.

    read on 2 sites and here about getting my smartgo to work


    when its in the usb, there is a yellow light, as soon as i stick in the card, light goes out


    i have tried this with and without a usb hub


    i have tried lsusb:


    i get


    Quote

    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    when i go to ip :8888


    i get


    after a reboot i get

    Thats your smargo,


    Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC


    looks like you have smargo is assigned to wrong usb port


    8/08/2012 10:03:56 0 s ***uk [smartreader] creating thread for device 001:002------ you will have to change this.goto part 11.


    In config it should be: device = 001:003

    I presume you have setup your smargo m8?
    Smargo Setup Ubuntu
    Smargo Setup Debian


    Quote

    Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC


    Oopz, missed that..


    I had the problem of the Device port changing all the time using a powered Hub with a smargo smartreader. Make sure you dont attach any more USB Devices & it should stay on the same Device ID




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.



    ok updated, on the 8888 page, when it restarts after 4 mins nothing, i have to reboot the server to get it to update?


    anyways, rebooted the server and:


    on oscam getting still


    8/08/2012 10:52:18 0 s starting thread log_list_thread
    8/08/2012 10:52:18 0 s log_list_thread thread started
    8/08/2012 10:52:18 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7209 (i686-linux-gnu-ssl-libusb-pcsc)
    8/08/2012 10:52:18 0 s version=1.20-unstable_svn, build #7209, system=i686-linux-gnu-ssl-libusb-pcsc, nice=-1
    8/08/2012 10:52:18 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    8/08/2012 10:52:18 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
    8/08/2012 10:52:18 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    8/08/2012 10:52:18 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    8/08/2012 10:52:18 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    8/08/2012 10:52:18 0 s signal handling initialized (type=sysv)
    8/08/2012 10:52:18 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
    8/08/2012 10:52:18 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    8/08/2012 10:52:18 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    8/08/2012 10:52:18 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
    8/08/2012 10:52:18 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    8/08/2012 10:52:18 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s monitor: disabled
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s camd35: disabled
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s cs378x: disabled
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s newcamd: initialized (fd=4, port=10000, crypted)
    8/08/2012 10:52:18 0 s -> CAID: 0963 PROVID: 000000
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s pandora: disabled
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s csp: disabled
    8/08/2012 10:52:18 0 s Starting listener 0
    8/08/2012 10:52:18 0 s radegast: disabled
    8/08/2012 10:52:18 0 s starting thread http
    8/08/2012 10:52:18 0 s http thread started
    8/08/2012 10:52:18 0 s starting thread reader check
    8/08/2012 10:52:18 0 s reader check thread started
    8/08/2012 10:52:18 0 s starting thread check
    8/08/2012 10:52:18 0 s check thread started
    8/08/2012 10:52:18 0 s ***uk [smartreader] creating thread for device 001:003------ you will have to change this.goto part 11.
    8/08/2012 10:52:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    8/08/2012 10:52:18 0 s waiting for local card init
    8/08/2012 10:52:18 915A1E8 r ***uk [smartreader] Using 0x82 as endpoint for smartreader hardware detection
    8/08/2012 10:52:18 915A1E8 r Smartreader device 001:003------ you will have to change this.goto part 11. not found
    8/08/2012 10:52:18 915A1E8 r ***uk [smartreader] Cannot open device: 001:003------ you will have to change this.goto part 11.
    8/08/2012 10:52:18 9160708 h HTTP Server listening on port 8888


    on lsusb , i see moved to 002.002 so updated but still getting errors

    just out of curiosity post you reader file?


    why you are getting this ------ you will have to change this.goto part 11. in the log is strange....could be a typo



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    ok guys getting somewhere, as after another boot got


    8/08/2012 10:58:34 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    8/08/2012 10:58:34 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
    8/08/2012 10:58:34 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    8/08/2012 10:58:34 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s monitor: disabled
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s camd35: disabled
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s cs378x: disabled
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s newcamd: initialized (fd=4, port=10000, crypted)
    8/08/2012 10:58:34 0 s -> CAID: 0963 PROVID: 000000
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s pandora: disabled
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s csp: disabled
    8/08/2012 10:58:34 0 s Starting listener 0
    8/08/2012 10:58:34 0 s radegast: disabled
    8/08/2012 10:58:34 0 s starting thread http
    8/08/2012 10:58:34 0 s http thread started
    8/08/2012 10:58:34 0 s starting thread reader check
    8/08/2012 10:58:34 0 s reader check thread started
    8/08/2012 10:58:34 0 s starting thread check
    8/08/2012 10:58:34 0 s check thread started
    8/08/2012 10:58:34 0 s ***uk [smartreader] creating thread for device 002:002----- you will have to change this.goto part 11.
    8/08/2012 10:58:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    8/08/2012 10:58:34 0 s waiting for local card init
    8/08/2012 10:58:34 92E21E8 r ***uk [smartreader] Using 0x82 as endpoint for smartreader hardware detection
    8/08/2012 10:58:34 92E21E8 r Found smartreader device 002:002----- you will have to change this.goto part 11.
    8/08/2012 10:58:34 92E21E8 r ***uk [smartreader] Reader initialized (device=002:002----- you will have to change this.goto part 11., detect=cd, mhz=600, cardmhz=600)
    8/08/2012 10:58:34 92E8708 h HTTP Server listening on port 8888
    8/08/2012 10:58:35 92E21E8 r ***uk [smartreader] card detected
    8/08/2012 10:58:37 0 ***uk [smartreader] SR: USB bulk read failed with error 5
    8/08/2012 10:58:37 0 ***uk [smartreader] SR: USB bulk read failed with error 5
    8/08/2012 10:58:37 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:37 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:42 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:47 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:47 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:52 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:52 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:57 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:58:57 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:59:02 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:59:02 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:59:07 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:59:12 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 10:59:12 92E21E8 r ***uk [smartreader] usb bulk write failed : ret = -4

    Quote from mrgmx

    just out of curiosity post you reader file?


    why you are getting this ------ you will have to change this.goto part 11. in the log is strange....could be a typo


    that was in the file of the oscam as a pointer i guess

    yeah but is it hashed out! as its a comment!


    May be nothing but never seen this been outputted lol



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    Run lsusb again, I almost guarantee you that your device ID has changed again, when your posting your oscam log, also post current lsusb printout. I had the exact same problems with usb hub.. It changes after reboot.


    Try this:
    Remove all unnecessary USB attachments & reboot
    run lsusb & update oscam configs.


    If that does not work
    Try the smargo without USB Hub and run lsusb & update oscam configs.


    Remember, you have to reboot after the devices are removed to try and get a perminant Device ID. If you attach any other devices the Device ID Might change again




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.


    is from the server,


    from myip:8888 for oscam says


    The device ID should (he says lol) only change when Computer is rebooted?


    Restart Oscam in Oscam webif and see if that picks it up after any changes made to port no!



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    ok mate, thanks for your help


    rebooted server,


    looks to be in same place



    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    looks like the card and reader ok, but still getting


    8/08/2012 11:20:58 0 s starting thread check
    8/08/2012 11:20:58 0 s check thread started
    8/08/2012 11:20:58 0 s ***uk [smartreader] creating thread for device 002:002
    8/08/2012 11:20:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    8/08/2012 11:20:58 0 s waiting for local card init
    8/08/2012 11:20:58 9B111E8 r ***uk [smartreader] Using 0x82 as endpoint for smartreader hardware detection
    8/08/2012 11:20:58 9B111E8 r Found smartreader device 002:002
    8/08/2012 11:20:58 9B15BF0 h HTTP Server listening on port 8888
    8/08/2012 11:20:58 9B111E8 r ***uk [smartreader] Reader initialized (device=002:002, detect=cd, mhz=600, cardmhz=600)
    8/08/2012 11:20:59 9B111E8 r ***uk [smartreader] card detected
    8/08/2012 11:21:01 0 ***uk [smartreader] SR: USB bulk read failed with error 5
    8/08/2012 11:21:01 0 ***uk [smartreader] SR: USB bulk read failed with error 5
    8/08/2012 11:21:01 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:01 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:06 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:11 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:11 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:16 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:16 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:21 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:21 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:26 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:26 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:31 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:36 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:36 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:41 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:42 9B111E8 r ***uk [smartreader] Error activating card.
    8/08/2012 11:21:46 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:46 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:51 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:51 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:56 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:21:56 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:01 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:01 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:06 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:11 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:11 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:16 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:21 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:21 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:26 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:26 9B111E8 r ***uk [smartreader] usb bulk write failed : ret = -4
    8/08/2012 11:22:27 9B111E8 r ***uk [smartreader] Error activating card.

    You could try installing/re-installing USB libs? you on Ubuntu?


    Install:
    sudo apt-get install libusb-dev



    Upgrade:
    sudo bash -c "apt-get update && apt-get upgrade"


    Also check if smargo is a clone


    http://linuxsat-support.com/sm…t-fake-smargo-reader.html


    Are you a 100% sure its 1.4 if not follow steps by Master G this will tell you!


    1: Update your smartreader+ if it has v1.2 or older firmware with v1.3 in your normal PC before puting into Linux server and set it to Autoswitch and select Normal to set it to work in Linux Server.


    2: In Your Linux Server.
    Copy these drivers to linux PC server. FTP 2 files:
    srp_tools_x86
    srp_update_x86
    Set on console to both file chmod 755 !


    3: Run command: ./srp_update_x86
    and you see like so:
    smartreader+ version v1.0, v1.1 or v1.2 then you have time to update.


    taken from post here


    http://linuxsat-support.com/li…ed-setting-up-smargo.html



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    Quote

    The device ID should (he says lol) only change when Computer is rebooted?


    I never said "The device ID should only change when when the computer is rebooted" mrgmx m8, I said it might change when it is rebooted. This identity problem is mainly due to the fact that older version's of the Smargo firmware do not allow a unique internal device ID for Linux to tie it to a port upon restart. This is not a problem unless you are using a Powered USB Hub where addressing the device becomes an issue. I had this problem with my smargo.




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    yes on 1.4 as just checked on windows on the laptop



    would be great if you said where to ftp too?

    Quote

    would be great if you said where to ftp too?


    It would also be great if you used the thanks button to show appreciation of mrgmx helping you out
    FTP them to Root
    or
    FTP them to temp (But then you will have to edit all the commands given to point to temp directory)




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    well i have read that post 3 times and was over my head from last night, so wasnt sure where to put them as even the post didnt say where to ftp them, but thanks has been hit :)


    ok, run the script and got


    root@cardshare:/home/cardshare# /tmp/./srp_update_x86
    COM_ERROR (/dev/ttyUSB0)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login