How to connect oscam with cccam?

There are 47 replies in this Thread which was already clicked 87,256 times. The last Post () by billy1234.

    sorry - don't have windows pc. so created without your suggested tool


    - - - Updated - - -


    managed to get a win pc.
    got the oscam.server file created.
    no content in oscam.user file
    transferred to my inbox /var/key folder
    activated it in setup
    but still no luck.
    is there a way to check if the key is being passed on?


    - - - Updated - - -


    sorted.. thanks

    is this the best configuration to stablish and fine way of work of cccam in oscam ? im trying to adjust as i can.


    oscam.conf


    [global]
    serverip = ip dream
    logfile = /var/log/Oscam.log
    clienttimeout = 10000
    fallbacktimeout = 1500
    clientmaxidle = 300
    nice = -1
    maxlogsize = 950
    preferlocalcards = 1
    usrfile = /var/log/OscamUser.log
    lb_mode = 1
    lb_save = 100
    lb_nbest_readers = 2
    lb_nfb_readers = 3
    lb_max_ecmcount = 1000
    lb_reopen_seconds = 500
    lb_retrylimit = 500
    lb_stat_cleanup = 500
    lb_auto_betatunnel_mode = 1
    lb_savepath = /var/log/OscamLB.log
    lb_nbest_percaid = 05:0
    resolvegethostbyname = 1


    [cache]
    max_time = 13
    max_hit_time = 30
    csp_port = 1
    csp_serverip = ip
    cacheex_cw_check = 01:-1
    cwcycle_check_enable = 1
    cwcycle_check_caid = 09C4,7A,1B1F,09C4,7A,1B1F,09C4,77,1B09,09C4,6D,1B6 7,0100,68,3B62,0523,093B,2AA8,06B4,39
    cwcycle_maxlist = 4000
    cwcycle_sensitive = 0
    cwcycle_allowbadfromffb = 1
    cwcycle_usecwcfromce = 1


    [cccam]
    port = puerto cccam
    serverip = ip dream
    nodeid = node
    version = 2.1.3
    reshare = 2
    forward_origin_card = 1
    minimizecards = 1


    [streamrelay]
    stream_relay_enabled = 0


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    ecminfo_type = 1
    user = user
    read_sdt = 1
    write_sdt_prov = 1
    extended_cw_api = 2
    boxtype = dreambox


    [webif]
    httpport = puerto
    httptpl = /etc/tuxbox/config/tpl/
    httprefresh = 30
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
    http_status_log = 1



    oscam server:


    [reader]
    label = cuenta dns de peer
    description = cuenta dns de peer
    protocol = cccam
    device = cuenta dns de peer ,puerto linea c
    user = usuario
    password = pass
    inactivitytimeout = 30
    reconnecttimeout = 10
    cacheex_maxhop = 2
    cacheex_drop_csp = 1
    cacheex_block_fakecws = 1
    group = 10
    emmcache = 1,1,2,1
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    lb_weight = 300
    cccversion = cccam
    cccmaxhops = 3
    cccwantemu = 1
    ccckeepalive = 1
    cccreshare = 2


    oscam.user:


    [account]
    user = usuario linea F
    pwd = pass linea F
    uniq = 1
    suppresscmd08 = 1
    allowedprotocols = cs357x,newcamd,cccam,gbox
    group = 10
    cacheex_maxhop = 2
    cacheex_drop_csp = 1
    no_wait_time = 1
    cccreshare = 0
    cccignorereshare = 0
    cccstealth = 1



    anyone has other config optimizated for cccam?

    coul some boday point me in the right direction please were I can find a oscam /ccam 230 ipk file please and a oscam /138 ipk file please for my black hole image 301f please for my duo 2 regards

    live long and prosper

    Can someone *please* help.
    I am loosing the will to live with OScam but it is not the S/W, it is me.
    I have VU+ Duo with latest VTi. Installed OSCAM.
    I have a C: line as "C: myserver.dyndns.com 10000 user pass"
    Tried the converter tool and copied files over to /etc/tuxbox.. but didnt work.
    I tried several configs from the net but none worked.
    I connected to OSCAM web interface and couldnt see any channels (Sly UK) although OSCAM was running (confirmed with "ps" via telnet)
    I know the C: line works, as CCcam client works on OpenVix4 on my dreambox.
    Can someone please post a working oscam.conf, oscam.user oscam.server to use on VU+ Duo to connect to a server using details from "C: myserver.dyndns.com 10000 user pass"

    VU+ Duo. BH 2.0.9. CCcam 2.1.3

    @ keratos




    1. oscam.conf


    [global]
    loghistorysize = 1024
    logfile = /etc/tuxbox/config/oscam/OScam.log
    disableuserfile = 1
    nice = -1
    maxlogsize = 500
    preferlocalcards = 1
    dropdups = 1
    usrfile = 0


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    user = user
    boxtype = dreambox


    [webif]
    httpport = 12000
    httpuser = user
    httppwd = password
    httprefresh = 10
    httphideidleclients = 1
    httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
    hideclient_to = 15
    httpemmuclean = 100
    httphideidleclients = 1



    2. oscam.dvbapi



    YOU have to download file which I upload here




    3. oscam.server



    [reader]
    label = name of C line who gave you 1
    protocol = cccam
    device = myserver.dyndns.com,10000
    user = user
    password = pass
    inactivitytimeout = 30
    reconnecttimeout = 5
    group = 1
    emmcache = 1,3,2
    cccversion = 2.1.3
    cccmaxhops = 1
    ccckeepalive = 1
    cccreshare = 1


    [reader]
    label = name of C line who gave you 2
    protocol = cccam
    device = myserver.dyndns.com,10000
    user = user
    password = pass
    inactivitytimeout = 30
    reconnecttimeout = 5
    group = 1
    emmcache = 1,3,2
    cccversion = 2.1.3
    cccmaxhops = 1
    ccckeepalive = 1
    cccreshare = 1



    4. oscam.user


    [account]
    user = user
    pwd = pass
    au = Hayat
    group = 1


    ONLY edit your C lines in file oscam.server. There is a 2 samples for 2 C lines. If you have only one C line, you can ignore another example (leave it like that).



    you need to ftp the files the 3 files.. oscam.conf oscam.server and oscam.user files to etc. tuxbox... config, then restart oscam


    oscam.conf


    [global]
    nice = -1
    logfile = /var/log/oscam.log
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1



    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    ecminfo_type = 1
    user = linuxsatsupport
    read_sdt = 1
    write_sdt_prov = 1
    extended_cw_api = 2
    boxtype = dreambox


    [webif]
    httpport = 8888
    httptpl = /etc/tuxbox/config/tpl/
    httprefresh = 15
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
    http_status_log = 1


    oscam.server


    [reader]
    label = myserver.dyndns.com
    protocol = cccam
    device = myserver.dyndns.com,10000
    user = user
    password = password
    inactivitytimeout = 30
    group = 1
    emmcache = 1,3,2
    cccversion = 2.1.3
    cccmaxhops = 1
    ccckeepalive = 1
    cccreshare = 1


    oscam.user


    [account]
    user = linuxsatsupport
    group = 1
    au = myserver.dyndns.com

    Edited 2 times, last by neil306 ().

    i have managed to set up oscam running cccam, i have everything running as it should, the problem i have is trying to reshare, i have created an account in users (cccam account) and forwarded the port, have dns etc etc and got the user account i created to run on my dads box but only by putting oscam on his box too, it wouldnt work in CCcam 2.3.0. i made the c line, put it in CCcam.cfg in etc (vix) started CCcam 2.3.0 (also tried other versions 2.1.2) but the channels wouldnt clear, went home and went to my oscam webif and it showed that he was connected (but not online)
    i put oscam 1.0.2 on his box put the configs in and went to his webif and it showed my line but where its supposed to say connected it said needs init. any ideas?? i then went and ran the softcam named just oscam (one of the latest i think) and with all the same configs and the line i gave him showed as connected and online and was clearing channels.
    what i want to know is how do i get the user account to run by just using CCcam 2.3.0 on his box??
    All the configs i have for oscam are the ones master g put up here.

    yes thats excatly what i want to do, however im just after looking at my oscam webif and it now shows him as connected and online. any ideas why its now online and wasnt before? maybe for the sake of it if you could go threw the steps of how to connect box a with oscam to box b with cccam, just to see if i covered everything? thanks


    - - - Updated - - -


    to connect oscam to cccam should i be creating an N line (or L line) rather than a C line??


    - - - Updated - - -


    and is the reason that the user is now showing as online because i created a F line in my cccam.cfg?? so what i gather from my reading is to give a peer a C line i need to create a F line, but i can do without the F line and just create a user and give the peer an N line? I cant put it to the test until tomorrow cuz its a bit late to be running up n down to me das!! also iv just after reading that its also possible to make a L line to give a peer which apparently gives faster ecm as there are no deskeys as in an N line. So could anybody out there advise on which method is best, to give the peer a C, N or L line?? would save me alot of running about tomorrow!!! thanks! or even just tell me if i have it totaly wrong! lol

    box 2 with cccam

    Quote

    F: user_oscam user_pswd 3 0 0 { 0:0:1 }


    box 1 with oscam

    together we grow - ferdi

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login