That looks like only half the config, scroll down the bottom window of the converter tool to see/copy all of it.
How to connect oscam with cccam?
-
- Article
- master G
- Thread is marked as Resolved.
-
-
sorry - don't have windows pc. so created without your suggested tool
- - - Updated - - -
managed to get a win pc.
got the oscam.server file created.
no content in oscam.user file
transferred to my inbox /var/key folder
activated it in setup
but still no luck.
is there a way to check if the key is being passed on?- - - Updated - - -
sorted.. thanks
-
is this the best configuration to stablish and fine way of work of cccam in oscam ? im trying to adjust as i can.
oscam.conf
[global]
serverip = ip dream
logfile = /var/log/Oscam.log
clienttimeout = 10000
fallbacktimeout = 1500
clientmaxidle = 300
nice = -1
maxlogsize = 950
preferlocalcards = 1
usrfile = /var/log/OscamUser.log
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 3
lb_max_ecmcount = 1000
lb_reopen_seconds = 500
lb_retrylimit = 500
lb_stat_cleanup = 500
lb_auto_betatunnel_mode = 1
lb_savepath = /var/log/OscamLB.log
lb_nbest_percaid = 05:0
resolvegethostbyname = 1[cache]
max_time = 13
max_hit_time = 30
csp_port = 1
csp_serverip = ip
cacheex_cw_check = 01:-1
cwcycle_check_enable = 1
cwcycle_check_caid = 09C4,7A,1B1F,09C4,7A,1B1F,09C4,77,1B09,09C4,6D,1B6 7,0100,68,3B62,0523,093B,2AA8,06B4,39
cwcycle_maxlist = 4000
cwcycle_sensitive = 0
cwcycle_allowbadfromffb = 1
cwcycle_usecwcfromce = 1[cccam]
port = puerto cccam
serverip = ip dream
nodeid = node
version = 2.1.3
reshare = 2
forward_origin_card = 1
minimizecards = 1[streamrelay]
stream_relay_enabled = 0[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = user
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = puerto
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1oscam server:
[reader]
label = cuenta dns de peer
description = cuenta dns de peer
protocol = cccam
device = cuenta dns de peer ,puerto linea c
user = usuario
password = pass
inactivitytimeout = 30
reconnecttimeout = 10
cacheex_maxhop = 2
cacheex_drop_csp = 1
cacheex_block_fakecws = 1
group = 10
emmcache = 1,1,2,1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 300
cccversion = cccam
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
cccreshare = 2oscam.user:
[account]
user = usuario linea F
pwd = pass linea F
uniq = 1
suppresscmd08 = 1
allowedprotocols = cs357x,newcamd,cccam,gbox
group = 10
cacheex_maxhop = 2
cacheex_drop_csp = 1
no_wait_time = 1
cccreshare = 0
cccignorereshare = 0
cccstealth = 1 -
Hi all need help building from scratch using a vps please get in contact I will pay you generous for your time cheers
-
Hi all need help building from scratch using a vps please get in contact I will pay you generous for your time cheers
How many customers do you need this server to be able to handle?????
-
is this the best configuration to stablish and fine way of work of cccam in oscam ? im trying to adjust as i can.
oscam.conf
[global]
serverip = ip dream
logfile = /var/log/Oscam.log
clienttimeout = 10000
fallbacktimeout = 1500
clientmaxidle = 300
nice = -1
maxlogsize = 950
preferlocalcards = 1
usrfile = /var/log/OscamUser.log
lb_mode = 1
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 3
lb_max_ecmcount = 1000
lb_reopen_seconds = 500
lb_retrylimit = 500
lb_stat_cleanup = 500
lb_auto_betatunnel_mode = 1
lb_savepath = /var/log/OscamLB.log
lb_nbest_percaid = 05:0
resolvegethostbyname = 1[cache]
max_time = 13
max_hit_time = 30
csp_port = 1
csp_serverip = ip
cacheex_cw_check = 01:-1
cwcycle_check_enable = 1
cwcycle_check_caid = 09C4,7A,1B1F,09C4,7A,1B1F,09C4,77,1B09,09C4,6D,1B6 7,0100,68,3B62,0523,093B,2AA8,06B4,39
cwcycle_maxlist = 4000
cwcycle_sensitive = 0
cwcycle_allowbadfromffb = 1
cwcycle_usecwcfromce = 1[cccam]
port = puerto cccam
serverip = ip dream
nodeid = node
version = 2.1.3
reshare = 2
forward_origin_card = 1
minimizecards = 1[streamrelay]
stream_relay_enabled = 0[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = user
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = puerto
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1oscam server:
[reader]
label = cuenta dns de peer
description = cuenta dns de peer
protocol = cccam
device = cuenta dns de peer ,puerto linea c
user = usuario
password = pass
inactivitytimeout = 30
reconnecttimeout = 10
cacheex_maxhop = 2
cacheex_drop_csp = 1
cacheex_block_fakecws = 1
group = 10
emmcache = 1,1,2,1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 300
cccversion = cccam
cccmaxhops = 3
cccwantemu = 1
ccckeepalive = 1
cccreshare = 2oscam.user:
[account]
user = usuario linea F
pwd = pass linea F
uniq = 1
suppresscmd08 = 1
allowedprotocols = cs357x,newcamd,cccam,gbox
group = 10
cacheex_maxhop = 2
cacheex_drop_csp = 1
no_wait_time = 1
cccreshare = 0
cccignorereshare = 0
cccstealth = 1anyone has other config optimizated for cccam?
-
how to set up oscam server for softcam key?
Sent from my Mi 4i using Tapatalk
-
coul some boday point me in the right direction please were I can find a oscam /ccam 230 ipk file please and a oscam /138 ipk file please for my black hole image 301f please for my duo 2 regards
-
http://linuxsat-support.com/showthread.php?t=30475
hi install this plugin ipk u find alls u need cams black hole
-
I cant down load them to my blackhole image on my duo2 I'm using the 301f black hole latest image
-
you have to ftp to var tmp volatille change attribut to 755 then green boton,yellow, install local ipk then reboot stb green u find it.
if u need more help let me know
-
Can someone *please* help.
I am loosing the will to live with OScam but it is not the S/W, it is me.
I have VU+ Duo with latest VTi. Installed OSCAM.
I have a C: line as "C: myserver.dyndns.com 10000 user pass"
Tried the converter tool and copied files over to /etc/tuxbox.. but didnt work.
I tried several configs from the net but none worked.
I connected to OSCAM web interface and couldnt see any channels (Sly UK) although OSCAM was running (confirmed with "ps" via telnet)
I know the C: line works, as CCcam client works on OpenVix4 on my dreambox.
Can someone please post a working oscam.conf, oscam.user oscam.server to use on VU+ Duo to connect to a server using details from "C: myserver.dyndns.com 10000 user pass" -
Guys,
I have a wetek play running openelec. Tvheadend is set up and I have oscam installed. How do I add a cccam?
-
@ keratos
1. oscam.conf
[global]
loghistorysize = 1024
logfile = /etc/tuxbox/config/oscam/OScam.log
disableuserfile = 1
nice = -1
maxlogsize = 500
preferlocalcards = 1
dropdups = 1
usrfile = 0[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = user
boxtype = dreambox[webif]
httpport = 12000
httpuser = user
httppwd = password
httprefresh = 10
httphideidleclients = 1
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
hideclient_to = 15
httpemmuclean = 100
httphideidleclients = 12. oscam.dvbapi
YOU have to download file which I upload here
3. oscam.server
[reader]
label = name of C line who gave you 1
protocol = cccam
device = myserver.dyndns.com,10000
user = user
password = pass
inactivitytimeout = 30
reconnecttimeout = 5
group = 1
emmcache = 1,3,2
cccversion = 2.1.3
cccmaxhops = 1
ccckeepalive = 1
cccreshare = 1[reader]
label = name of C line who gave you 2
protocol = cccam
device = myserver.dyndns.com,10000
user = user
password = pass
inactivitytimeout = 30
reconnecttimeout = 5
group = 1
emmcache = 1,3,2
cccversion = 2.1.3
cccmaxhops = 1
ccckeepalive = 1
cccreshare = 14. oscam.user
[account]
user = user
pwd = pass
au = Hayat
group = 1ONLY edit your C lines in file oscam.server. There is a 2 samples for 2 C lines. If you have only one C line, you can ignore another example (leave it like that).
-
Can someone *please* help.
I am loosing the will to live with OScam but it is not the S/W, it is me.
I have VU+ Duo with latest VTi. Installed OSCAM.
I have a C: line as "C: myserver.dyndns.com 10000 user pass"
Tried the converter tool and copied files over to /etc/tuxbox.. but didnt work.
I tried several configs from the net but none worked.
I connected to OSCAM web interface and couldnt see any channels (Sly UK) although OSCAM was running (confirmed with "ps" via telnet)
I know the C: line works, as CCcam client works on OpenVix4 on my dreambox.
Can someone please post a working oscam.conf, oscam.user oscam.server to use on VU+ Duo to connect to a server using details from "C: myserver.dyndns.com 10000 user pass"you need to ftp the files the 3 files.. oscam.conf oscam.server and oscam.user files to etc. tuxbox... config, then restart oscam
oscam.conf
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 15
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1oscam.server
[reader]
label = myserver.dyndns.com
protocol = cccam
device = myserver.dyndns.com,10000
user = user
password = password
inactivitytimeout = 30
group = 1
emmcache = 1,3,2
cccversion = 2.1.3
cccmaxhops = 1
ccckeepalive = 1
cccreshare = 1oscam.user
[account]
user = linuxsatsupport
group = 1
au = myserver.dyndns.com -
i have managed to set up oscam running cccam, i have everything running as it should, the problem i have is trying to reshare, i have created an account in users (cccam account) and forwarded the port, have dns etc etc and got the user account i created to run on my dads box but only by putting oscam on his box too, it wouldnt work in CCcam 2.3.0. i made the c line, put it in CCcam.cfg in etc (vix) started CCcam 2.3.0 (also tried other versions 2.1.2) but the channels wouldnt clear, went home and went to my oscam webif and it showed that he was connected (but not online)
i put oscam 1.0.2 on his box put the configs in and went to his webif and it showed my line but where its supposed to say connected it said needs init. any ideas?? i then went and ran the softcam named just oscam (one of the latest i think) and with all the same configs and the line i gave him showed as connected and online and was clearing channels.
what i want to know is how do i get the user account to run by just using CCcam 2.3.0 on his box??
All the configs i have for oscam are the ones master g put up here. -
...........
what i want to know is how do i get the user account to run by just using CCcam 2.3.0 on his box??it is not clear what you want to do.
What do you want to connect?
box 1 with oscam to box 2 with cccam ? -
yes thats excatly what i want to do, however im just after looking at my oscam webif and it now shows him as connected and online. any ideas why its now online and wasnt before? maybe for the sake of it if you could go threw the steps of how to connect box a with oscam to box b with cccam, just to see if i covered everything? thanks
- - - Updated - - -
to connect oscam to cccam should i be creating an N line (or L line) rather than a C line??
- - - Updated - - -
and is the reason that the user is now showing as online because i created a F line in my cccam.cfg?? so what i gather from my reading is to give a peer a C line i need to create a F line, but i can do without the F line and just create a user and give the peer an N line? I cant put it to the test until tomorrow cuz its a bit late to be running up n down to me das!! also iv just after reading that its also possible to make a L line to give a peer which apparently gives faster ecm as there are no deskeys as in an N line. So could anybody out there advise on which method is best, to give the peer a C, N or L line?? would save me alot of running about tomorrow!!! thanks! or even just tell me if i have it totaly wrong! lol
-
hi if you have fixed ok if not and you accept remote control help via teamvieuwer let me know , tkyou
-
box 2 with cccam
QuoteF: user_oscam user_pswd 3 0 0 { 0:0:1 }
box 1 with oscam
Quote[reader]
label = paddyh
description = OScam to CCcam
protocol = cccam
device = IP-box1,port
user = user_oscam
password = user_pwd
inactivitytimeout = 30
group = 1
emmcache = 1,1,31
cccversion = 2.1.1
ccckeepalive = 1
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!