I see you have two of those boxes. if you had them both from the same place i suggest you downgrade the firmware on the working one back to 1.2.58e if i was you.
Nano
I see you have two of those boxes. if you had them both from the same place i suggest you downgrade the firmware on the working one back to 1.2.58e if i was you.
Nano
Hello, i tried to instal e2 image and it stuck on boot.
I can goto spark but when i go to soark menu to update, there is no 1.2.51 e2 update. Can anyone help?
Thanks
Introduce your self first here : Forum Gateway - Powered by DnP Firewall
And wich e2 image are you trying to flash.
go into spark and select menu
choose spark,go to update software
choose spark_1.2.51 E2 Boot Upgrade EU
Hello, introduction done.
I have tried hdmu image pkteam too and have always the same problem.
I have installed e2 image in other receivers, and my problem its ony that in online sark update i dont have the 1.2.51 boot upgrade.
It gos from 1.2.50 to 1.2.52.
This my problem.
Thanks
Hmm strange
When i go to spark upgrade software and i scroll down then i see spark_1.2.51 E2 Boot Upgrade EU.
So it is strange that you can not see that.
Yup i think will send it to seller to exchange. I've already have try everything, dunno what to do now.
But anyway thanks for reply :)
Regards
If you have bricked any box yourself by putting in certain software that did not come with the box in the 1st place, then i
don't think this is the fault of any seller.
You are after all trying to introduce something to the box that wasn't on it when you bought it, so any installing of software
is entirely at your own risk & that goes for any box.
By the way, i am not a seller either.
Yes its very strange but its what happens.
Is there any way to restore completly to factory with no e2 image installed and with no update done?
I think not that there is a way to restore completly to factory with no e2.
Look here : Amiko Alien 2
And have you contact your reseller for this problem
Have you tryed the latest hdmu or a older one.
Please be VERY careful when trying the above because the information is slightly wrong, this problem only tends to occur when you have tried loading or booting to E2 without the correct u-boot update and there is only one version of Spark that also includes a u-boot update, so try the above by all means but you MUST make sure you go for Spark 1.2.52 E2 Update, if you don't you will have problems with E2 and booting methods.
I personally would advise our own customers to please never try this yourselves unless you are 100% sure you know what you are doing, we'd much rather you contact us and let us do the job for you. If you purchased elsewhere then best to check with your supplier as their terms maybe different.
Amiko alien 2 morto aqui no Brasil,menos de 24 horas de teste,ferrou,fica parado no
relógio,não aceita o putty,já fiz de tudo,de uma luz pois já, vejo muita conversa sobre o mesmo,pra mim e inviável mandar para outro pais
Here Amiko Alien 2 Dead not Brazil, Less than 24 Hours test, screwed, there IS Stopped Clock, NOT AGREE putty,'ve done everything from POIs Have A light,
I see lot of talk about the SAME, TO ME paragraph and send another country unviable
I would do neither and contact your supplier to cure this problem for you however if you do have a go yourself then you MUST make sure once you get Spark to boot that you do an online update to Spark 1.2.51 E2 as this is the ONLY Spark update which contains a U-boot update which if you don't do you run the risk of never being able to boot to E2 again. AGAIN WE ASK THAT NONE OF OUR OWN CUSTOMERS EVER TRY THIS simply contact us if you have a problem such as this and we will look at recovering this for you.
Many thanks for your Message, it does help me a lot.
Jokal please read the rules, paying attention to Rule number 1.
Thanks
Nano
Hi,
many thanks for your info, no i have installed 1.2.51 with u-boot update for E2, after i update only the App from a usb-Stick to 1.2.65, how can i start E2 now?
Should i update U-Boot again?
Many thanks
jokal
User Jokal has now been given a 24 hour ban for refusing to make an introduction as per the forum rules despite being asked several times to do so :amazed:
Hello Everyone, i also have a amiko alien 2 stuck on boot. im a complete newbie to amiko. BUT im still stuck. i get the error below.
Board: STx7105-PDK [32-bit mode]
U-Boot 1.3.1-g72483220 (Jan 17 2012 - 17:10:49) - stm23_0051 - YW_1.1.003-9-g7248322 overclock
DRAM: 256 MiB
NAND: Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
512 MiB
SPI: ERROR: Unknown SPI Device detected, devid = 0x1f, 0x46, 0x02
ERROR: Offset out of range (max=0xffffffff)
In: serial
Out: serial
Err: serial
Ident ic exist
Ident ic get stb id
IdentID : 0c 00 0a 00 00 08 01
PDK7105>
PDK7105> stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=6000
PDK7105> set bootargs console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:0037:04:15:00
PDK7105> 8.40.1:255.25 5.0.0:lh:eth0:off
Unknown command '8.40.1:255.25' - try 'help'
PDK7105> 000
Unknown command '000' - try 'help'
PDK7105>
do i need to download anything before trying putty? not sure what im doing wrong! im not sure what files i need to download and upload to box.
If its not working i would contact the shop you purchased it from.
Nano
hi i manage to getting AMIKO ALIEN 2 FIXED VIA PUTTY. but im a newbie, everytime i switch off the receiver it gets stuck on boot again and i have to redo the putty. also seems like it doesnt scan the 28.2e
Don’t have an account yet? Register yourself now and be a part of our community!