Help to set up server

There are 15 replies in this Thread which was already clicked 825 times. The last Post () by master G.

    Hi,


    Total newbie so be gentle please :sun:


    I have followed http://linuxsat-support.com/li…-1-3-install-package.html and have got as far as setting up omnikey readers.


    I have typed in nano /etc/opensc/opensc.conf and removed hash tags as explained as


    reader_drivers = pcsc, ctapi;
    try_emulation_first = yes;
    lock_login = false;
    provider_library = /lib/libpcsclite.so.1


    I then type in after reboot opens-tool ?list-readers -1 and get invalid option -- `1` ??? according to tutorial is should say
    Readers known about:
    Nr. Driver Name
    0 pcsc Omnikey 1020


    When i log in to web interface it says readers 0/1 (i have to omnikey plugged in)


    0x272fb30 r 1 #mysmartcardreader ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:12:22 UNKNOWN (no entitlements)


    Do you know what I am doing wrong? how do I configure the configure section on the oscam 1.2o unstable web interface for sly uk and is there any other advice?


    As said, total newbie so any info would be much appreciated.


    Thanks

    • Official Post


    The correct command to list your omnikey is


    Code
    opensc-tool -l


    Try that buddy.

    Quote from rangers19873

    Thanks but I am getting the same response


    opensc-tool : invalid option -- `1`
    Usage: opensc-tool [OPTIONS]
    Options:
    lists all different commands :-(


    That's a lower case L you need to type, not the number 1


    sent using my telepathic powers

    Have you got this in oscam server
    [reader]
    label = ****K
    protocol = pcsc
    device = 0
    post your configs leaving out the ****** bits and it might help
    on some setups you don't even have to #out any thing (single reader setups)
    did you update/install pcsc "apt-get install opensc" ??? hope this helps annie.

    I have my mate connecting and its coming on CCcam web info page as connected but has (nok) which i presume stands for not ok.
    |00d 00:04:28|00d 00:00:01|64 (0)|0 (0)|2.1.4 |*** Digital (UK) - ESPN (nok)| 0.0001s |


    Any suggestions? I must be so close. Shall I post any config files?


    Thanks


    Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-------+-----+--------+-----------------------------+----------+
    00:02:30|00d 00:00:07|110 (0)|0 (0)|2.1.4 |*** Digital (UK) - ESPN (nok)| 0.0001s |
    +---------+---------------+------------+------------+-------+-----+--------+-----------------------------+----------


    there also is a oscam.conf.bak....should that be there?


    oscam.server



    and oscam.user


    Code
    [account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963


    is there anything else?


    Thanks

    • Official Post
    Quote

    there also is a oscam.conf.bak....should that be there?


    You can safely delete .bak files, they are duplicates..


    Quote

    is there anything else?


    Make these changes then check oscam log for errors...


    Add this to [global] in oscam.conf, restart oscam then look in /var/log/oscam.log or connect to the webif status page and copy the info from there..


    Code
    logfile = /var/log/oscam.log


    Change oscam.server to this;


    Code
    [reader]
label = slot1
protocol = pcsc
device = 0
detect = cd
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963


    Do you have an N line in CCcam.cfg to connect oscam & CCcam ? If so show us that also buddy..

    hi this is the log



    Really appreciated

    code:



    -------------------------------------------------------------------------------
    >> OSCam << cardserver log switched at Wed Feb 27 08:47:53 2013
    -------------------------------------------------------------------------------
    2013/02/27 08:47:53 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:47:53 CEF720 c cccam (0963&000000/0000/C5A8/66:CB1E): not found (79 ms) by slot1
    2013/02/27 08:47:53 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7149 (x86_64-linux-gnu)
    2013/02/27 08:47:53 0 version=1.20-unstable_svn, build #7149, system=x86_64-linux-gnu, nice=-1
    2013/02/27 08:47:53 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/27 08:47:53 0 max. logsize=10 Kb, loghistorysize=4096 bytes
    2013/02/27 08:47:53 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2013/02/27 08:48:01 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:48:01 CEF720 c cccam (0963&000000/0000/C5A8/66:5386): not found (79 ms) by slot1
    2013/02/27 08:48:09 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:48:09 CEF720 c cccam (0963&000000/0000/C5A8/66:626D): not found (79 ms) by slot1
    2013/02/27 08:48:17 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:48:17 CEF720 c cccam (0963&000000/0000/C5A8/66:5338): not found (79 ms) by slot1
    2013/02/27 08:48:25 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:48:25 CEF720 c cccam (0963&000000/0000/C5A8/66:BB98): not found (78 ms) by slot1
    2013/02/27 08:48:33 CEAD80 r slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/27 08:48:33 CEF720 c cccam (0963&000000/0000/C5A8/66:F216): not found (78 ms) by slot1


    Hope this helps. I notice this is saying channel not subscribed??


    CCcam.cfg


    code:


    N: 127.0.0.1 ###### ##### ##### 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256



    Thanks

    sorted, mate gave me a card that did not have sports and he was trying to watch sports :snicker:


    Thanks to everyone. ECM times are saying 87ms is that good? @ what ECM time would you expect glitching and I have a 2nd card I would like to put in and load balance. How would I do that and what advantages will this give? In the meantime I'll do more reading to see if I can answer my own questions.


    Thanks

    • Official Post
    Quote from rangers19873

    sorted, mate gave me a card that did not have sports and he was trying to watch sports :snicker:


    Thanks to everyone. ECM times are saying 87ms is that good? @ what ECM time would you expect glitching and I have a 2nd card I would like to put in and load balance. How would I do that and what advantages will this give? In the meantime I'll do more reading to see if I can answer my own questions.


    Thanks


    Ecm times are great buddy. To benefit from oscams load balancing you really need to be using oscam only on the server side but tbh your current setup should be more than enough to satisfy any hobbyist so imo there is no need to change anything, just enjoy what you have now for a while.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login