dm500s 28.2E UK channel list

There are 19 replies in this Thread which was already clicked 3,159 times. The last Post () by cazuela.

    Similarly, I am interested in getting my old dm500s up and running again. I have loaded 15.0d, but I have a problem as I live most of the year on Costa Blanca, Spain.
    I have a 2.4M dish with centre feed. Signal on a S*Y box is excellent and all FTA open.
    Does anyone have a BACKUP suitable for my location, in Spain.
    I am experiencing problems with getting most of the encoded to open (I can't open any). Even some of the FTA ones won't open. Probably due to location in Spain & UK listings used on 15.0d. I get "Error", "channel not available"..
    I have looked in "Camd-info" screen and it reads "FTA", "using fta".
    Using the info on screen I have 84% sig, snr 72%, 10,600Mhz H and the green signal strip shows about 80+% (steady), Comedy Channel.
    I usually have to use channels in the 12Mhz band for decent signals on my S** box.
    I do get channels visible on screen, but a "Service scan" "Scan transponders", has given me only 17 Tv & 14 Radio channels (31 in total) around the 11.5/11.6 Mhz region.
    Can I upload a replacement channel list?


    Anyone able to offer suggestions???:50_002:

    Edited 9 times, last by siesta0 ().

    Thanks Cazuela.
    I have no signal problems with Free *** channels. I get them all. I have done the most obvious an autoscan.
    My *** box gets them all plus lots of trash channels/shopping/asian/etc. Signal on a *** box is excellent and all FTA open. I am getting cleared reception on 10.6MHz to 11.7Mhz, as above thread. Using the info on screen I have 84% sig, snr 72%, 10,600Mhz H and the green signal strip shows about 80+% (steady), *** Comedy Channel.
    What I would like to know is why 15.0d doesn't seem to be working on my DM500S.
    I had given tech info showing some of my results with scans, my LNB is 0.6 and the dish size is 2.4M. My LNB is a twin feed, 1 feed to *** box & 1 feed to DM500S.
    How do I get the cams to work on my DM 500S?
    The reception is not my problem it is the non-working cams I am concerned with.
    I have uploaded Neutrino to the DM500S and that gives me strong signals and a full list of FTA channels, but no *** channels. BBC , ITV, C4, Channel 5 are clear as day, same as on my *** box.
    Neutrino seems to be providing me with the best options.
    How do I install cccam on Neutrino?
    Many thanks M8's.


    - - - Updated - - -

    Edited 13 times, last by siesta0 ().

    Quote

    Using the info on screen I have 84% sig, snr 72%, 10,600Mhz H and the green signal strip shows about 80+% (steady), *** Comedy Channel.


    Quote

    my LNB is 0.6 and the dish size is 2.4M. My LNB is a twin feed, 1 feed to *** box & 1 feed to DM500S.


    maybe you need to activate whichever cam you want to use on it..

    My LNB is 0.6 and the dish size is 2.4M. My LNB is a twin feed, 1 feed to *** box & 1 feed to DM500S.


    How do I get the cams to work on my DM 500S?


    The reception is not my problem it is the non-working cams I am concerned with.


    The cams have been activated. Ethernet is not a problem.


    I am experiencing problems with getting most of the encoded *** to open (I can't open any).


    I have NO signal problems with Free *** channels. I get them all. I have done the most obvious an autoscan.


    My *** box gets them all plus lots of trash channels/shopping/asian/etc. Signal on a *** box is excellent and all FTA open. I am getting cleared reception on 10.6MHz to 11.8hz, as above thread.


    Using the info on screen on my DM 500S, I have 84% sig, snr 72%, 10,600Mhz H and the green signal strip shows about 80+% (steady), *** Comedy Channel, but the channel won't open.


    How do I install Cccam on Neutrino?


    Neutrino seems to be providing me with the best options.

    Edited 3 times, last by siesta0 ().

    Quote from siesta0

    I don't have subscription or a share.


    I thought Cccam & Oscam opened the subscription channels???


    Many thanks.


    Then you misunderstood whatyou have read/heard.
    You either need a subscription card and/or a peer with such card to open any P.P.V channels
    An emulator such as CCcam will open these when you have configured it for your own card..

    Thank you once again.


    The only card I have is a freesat *** card. Without subscription to premium channels. White card.


    I thought a "backup image" would open subscription channels.


    Thanks for the info.


    I'll have to get an openbox rxr with gift then!


    Or do I have any options for my DM500S?

    Edited 3 times, last by siesta0 ().

    so you can either live with what you have.... or...
    get yourself a card with certain package then look for a peer with another package to share with.
    Read up about Cardsharing Tutorials, HowTo & Guides
    At first it might all seem very daunting but it is far better( you´ve got all the info + support on site)
    than "monthly renting" from those "microwave operators" in the south..
    Regards from the North ;)

    Thank you.


    Just had a look "Cardsharing Tutorials, HowTo & Guides".


    Looks like I have my reading until after Xmas.


    Where do I start???


    Where do I get "a card with certain package then look for a peer with another package to share with"?


    Any help is most welcome!

    Edited once, last by siesta0 ().

    It depends on what you want to watch and can afford obviously..
    There are too many to list here but if you look at the sponsors´ online shop to give you an idea..
    or Imagine you get a movies package then look for a peer with a sports package.( not necessarily $ly card as there doesnt seem to be much future for them)
    again reading will soon clear it up for you..
    btw- if you know of any neighbours wanting to get rid of their 150 dishes let me know please.. :)

    The sponsor doesn't seem to have much choice (2 types adult and Tivusat), a total of only 4 cards available.


    Anyone else able to supply???


    Or where do I start with my reading???

    Edited once, last by siesta0 ().

Your dedicated resource for Enigma1 Dreambox support.

Access downloads and troubleshooting for the DM500, DM600, and DM7020 legacy models. Support and downloads for classic Dreamboxes. Keep your DM500, DM600, or DM7020 running with Enigma1 software and community help.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login