Hi all ... I'm trying to update my vu+ duo2 with null cable I've connected fine and its started to update , but it's just hanging at the stage 2 enter into cfe mode and is at 20% am I missing anything? .... I'm having to flash this way as I can't do it through usb , tried all sorts of sub sticks... Any ideas m8ys
Help needed
- splat01
- Thread is marked as Resolved.
-
-
Was your usb formatted to fat32?
-
Yes done all that ....used about 10 different sticks so I've decided to try a null cable ...... Every time I restart my vu box it goes back to the set up screan and won't hold any settings .... So I'm trying to go back to vix from BH .... So as I said does anyone know why it's hanging at 20% and asking to enter cfe mode
-
very strange that it wont accept any usb stick...
presuming you have tried all images and versions including the vu+ duo2 original clean image..
What was the previous working image on it ???
Also presuming it´s an original vu+.......
Can you enter the box through telnet or FTP ?? -
When I put any usb stick in all it says is reading sub for a split second then goes to first boot set up ..... I set it up then turn it off and loops round again...... Tried connecting with vu+ utility and that seems to connect but sticks at 20% and asks to restart machine and want to start cfg..... Then that's as far as it gets..... Don't know what to do next to be honest .....
-
Do you have any other usb or hdd attached while trying to flash ? If so disconnect them. Try using this tool => USB Format Tool
-
I have an hard drive inside for recording but no other sub devices connected .... I'll give that tool a go
-
i would disconnect the hdd and then try lash on a backup ,see what happens...
-
nope still nothing
-
Quote
it says is reading sub for a split second then goes to first boot set up
This usually occurs on mine if the image is corrupt or not in the right format-> vuplus folder containing duo2 folder containing files..
I know you have the experience bud but before desperation,,, a step back to ponder... -
ive read about peeps using a powered usb device and have sorted it out that way.... but i never rush in .. and ill keep reading and searching to sort the prob out .... i think it is corrupt , all i need to do is get inside the damn thing lol ..... right off to bed and try another day .... shame there anything on the board like a pc that i can reset by swapping pins around .... night all
-
Hi all ... I'm trying to update my vu+ duo2 with null cable I've connected fine and its started to update , but it's just hanging at the stage 2 enter into cfe mode and is at 20% am I missing anything? .... I'm having to flash this way as I can't do it through usb , tried all sorts of sub sticks... Any ideas m8ys
Hi Splat01
Can I ask what programme you were using to connect to your duo2?
Thanks
Jay -
master G
Moved the thread from forum Vu+ DUO2 Support to forum VU+ DUO 2.
VU+ DUO 2 PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!