oscam and fransat

Oscam can read a Viaccess Fransat card if that's what you're asking.

HTH
Sairze

yes it works with oscam

Quote from alain34280

yes it works with oscam

Sorry to hijack this thread but is there an idiots guide to using a Fransat card with Oscam like there are several very good ones for Sky.

Thanks

The short answer is no. I have been trying for 5 years to get TNTSAT or Francesat cards working. You can bits here or bits there but I have found it impossible to put it all together. I used to use an Atlas and F lined it to my VU+ but for some reason Atlas no longer reads the cards so I am having yet another go. How have you fared, benwiddowson? Or can anyone else point us in the right direction.
?

Quote from naszdom

The short answer is no. I have been trying for 5 years to get TNTSAT or Francesat cards working. You can bits here or bits there but I have found it impossible to put it all together. I used to use an Atlas and F lined it to my VU+ but for some reason Atlas no longer reads the cards so I am having yet another go. How have you fared, benwiddowson? Or can anyone else point us in the right direction.
?

I managed to get TNTSAT and Sky both working on Oscam mate. Would it help if i post my configs?

Yes please I might be able to get my Cyfra+ card instead of your sky going in oscam at the same time. However I have seen lots of oscam.conf files but then there is also oscam.dvbapi oscam.user oscam.srvid the list gets longer every time and everyone looks different. This is where I get lost.

I'm at work at the moment. I'll post them tomorrow morning provided I remember.

- - - Updated - - -

The following is what i used to get mine working. I have a red s*y uk card and an official TN*SAT card. This worked fine in my Amiko Alien2+ (although i currently have an issue with sky entitlements but thats because i had the card out the box for a few weeks). I don't have a FRANSAT card so can't vouch for that.

*** OSCAM.USER ****
[account]
user = localuser
group = 1,2

*** OSCAM.SERVER ****
[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = ****
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

[reader]
label = tntsat
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:030B00,FFF400
aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,0,2504B382B16D8C6758DB960E311E9351,0,0,0,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,0,0,1DE5B042AD670BB16A3A76BDAD2F7AC0
group = 1

*** OSCAM.DVBAPI ****

P: 0500:030B00:2013:04A9 # TMC
P: 0500:030B00:2027:04A9 # TMC
P: 0960:000000

Hope this helps

Sorry still black screen. Can I go through my setup and see if cannot see anything bleeding obvious

Receiver: VU+ Uno
Image: VTI 9.0.1
Oscam: 1.20 rev 11201
Card: TNT working last night in a strong
Slot: Slot 2 (sci1) chip side

Tuxbox/Config:
oscam.server*
oscam.conf
oscam.dvbapi*
oscam.provid
oscam.services
oscam.srvid
oscam.user*
The above I picked up on previous attempts. Those marked * have been amended to yours except in oscam.server I only have the tntsat info under [reader]. The others files may need amending or deleting. Everything 755

Tuxbox:
oscam.constant.cw
oscam.keys
satellites.xml
scart.conf
terrestrial.xml
timezone.xml
The above date back to Oct and Dec 2015 except for keys which are the latest. Everything 755