Yea I was about to say the same. One of the better packages out there. Shame if it happens.
Posts by nirmies
-
-
Mate you need a cable router not adsl.
-
I get badr4 on 26e on my td110 with inverto black in west midlands. Mbc2 11.919h. Currently on my blade showing as 70% quality and my usuals needs tweaking.
I also get 7.3w top movies HDTV etc no problems 24 hours a day unless bad weather etc.
-
The range on them is not very good and/or suffer from signal strength.
They are perfectly fine in same room or next to or above and below rooms. Anything more than that then expect a few minor niggles.
-
Same here noticed much higher than the usual higher ecm that has occurred over the least couple of Weeks or so.
-
hey guys, turned on my bedroom box this morn and everything was scrambled, so after checking my homeplugs, i looked at my webifs.
found out that my entitlements had expired, however i thought i had a keep alive? have got the card in original reciever at the min. could somebody have a quick look over my file,
thanks guys.
[reader]
label = slyuk
protocol = pcsc
device = 0
enable = 1
detect = cd
mhz = 357
cardmhz = 357
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000
lb_weight = 101
ecmwhitelist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
showcls = 0[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[webif]
httpport = *****
httpuser = +++++
httppwd = *****
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000[account]
user = *******
pwd = *******
monlevel = 0
uniq = 0
group = 1
au = slyUK
caid = 0963under account au sly UK does not match the label sly uk. Try that. Also I personally don't use mhz and card mhz on 0963 card as oscam sets this its self.
-
Very easy to set up and use. A very popular box for beginners. Motor control is good too and more than good enough to use on a static dish if thats the setup you have.
-
Have you tried port forward website?
-
-
Also check that both oscam and cccam are not trying to read the card. In cccam you should just have connecting line and flines.
Post your oscam configs too.
-
I use oscam to read card with nline connector to cccam and create fline in cccam.cfg and give out cline.
-
-
Blade online has been updated so you can download from there. Saying that TCM HD and Eurosport2 HD are not included. Not sure what else is missing but this is a good template and you can manually add the few missing channels for 28.2e.
-
Thats where I got mine from excellent service and great communication. They do everything for you. Just thought id let you know in case your worried with parting with so much money.
-
1. So you can access blade online and update channels? 2. What is the connection status in the 9991 menu? 3. Is it a wired or wireless connection.
-
Read the tutorials. Then if you have any questions or problems search for the solution and if your still stuck then post a thread in the relevant section.
-
-
Just a quick update. I managed to open up PLTV on 10e using latest biss key through this menu. I navigated to channel and it showed scrambled. Press 9992 on remote and keys menu will appear. Select biss and input key in place of existing key ( I think they are dummy keys ) I noted the key that was overwritten just in case. After entering the key I just pressed ok and the channel cleared in less than a second. Press exit and when prompted save the changes.
Now to try the same for N*** sports on 39e.
-
Hi mate. Yes and other options are there too. I'm not sure if the other options work.
Any idea how to use that menu on a blade? I'm guessing I go into bis then select one of the many options there and input the keys in manually using the remote control.
I've never used keys or soft cams before so I am totally new to this, but I do now have motorised system and would like to try and open up pltv on 10e and from what i've researched n*** sport on 39e.
-