Posts by nirmies

  • Blade BM7000s using on a motorised System

    With my blade I download the 28.2 channel list from blade online.


    Then I scan whichever sat i'm interested in. to access the sat or sats I press group then select 7w or whatever and the dish will move to that sat and I can select in this case top movies channel.


    Sent from my GT-I9100 using Tapatalk 2

  • Oscam entitlements for slyuk


    This is what I have tested and can confirm it does work. Entitlements will be around 4-5 weeks ahead of current date.

  • Latest Firmware for Blade Media BM7000S

    So when you press 9991 status is green and says connected?


    Have you tried to power off and back on again?


    Do you know if the owner of the server you are connecting to has not disabled share to you?


    What happens if you go back to the old software?

  • Debain 6 Oscam+cccam Omnikey


    Did you follow the tut How to install Omnikey readers on Linux PC in the tutorial section by master g? If not try that.

  • Debain 6 Oscam+cccam Omnikey

    Quote from sync

    0 means it's a local card, 7 means you can share down 7 more hops
    1 & 1 means you friends card is local and you have 1 re-share


    I suspect your friend is faking his local card, try his line directly in a box, if it dont clear ask him why
    fakers will give you plenty excuses why and tell you its your fault all the while using your card
    give him 0 0 0 { 0: 0: 0 } untill his card starts to clear channels, but watch this 'friend' closely ;)


    Thanks for advice regarding the "friend". I will keep an eye on things and see what develops. Still cant get this omnikey to work. Any other suggestions that I could try, I have tried everything to my knowledge.

  • Debain 6 Oscam+cccam Omnikey

    Quote from sync

    glad you got sorted


    is this other card showing in server and shares in your CCcam.info ?


    Yes it is mate. One thing that puzzles me is that my friends c line shows Uphops/Downhops etc 1 and 1, for my card it shows 0 and 7 could this be the problem? Im assuming the 0 means no reshare?!?

  • Debain 6 Oscam+cccam Omnikey

    Quote from sync

    also if your client box is connecting to CCcam then don't forget to allow it to recieve a share from beyond your CCcam


    F: user pass 3 0 0 { 0: 0: 2 }


    BIG THANKS that seems to have done the trick and the channel I was after from him now clears, now to try and work out why the card I have temp access too wont clear.

  • Debain 6 Oscam+cccam Omnikey

    Hi im having problems with my card not clearing. I am getting rejected user ident (120 ms) (0 of 0) (no card support 0963:000000) continuously. What have I missed out?


    [global]
    nice = -1
    logfile = /dev/null
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httprefresh = 5
    httphideidleclients = 0
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = 10002@0963:000000


    [reader]
    label = whitecard
    protocol = pcsc
    device = 0
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    emmcache = 1,3,2
    group = 1
    caid = 0963
    ecmwhitelist = 0963@000000:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B


    [account]


    user = linuxsat
    pwd = support
    monlevel = 0
    uniq = 0
    group = 1
    au = whitecard
    caid = 0963


    in cccam interface im getting nameofchannel(nok)


    I also have a cline from a friend and with no card in reader I still get the (nok)


    Thanks in advance.

  • Debain 6 Oscam+cccam Omnikey

    Right on my spare pc I thought I would experiment with the above setup.


    I have installed Debain 6 and oscam+cccam.


    I have followed the guide on how to install omnikey readers on Linux pc.


    All goes well before and after the bit where I type opensc-tool ?list-readers. I do not get the


    Readers known about:
    Nr. Driver Name
    0 pcsc Omnikey 1020


    as shown in the tut


    all I get is the options commands list


    any advice?

  • Latest Firmware for Blade Media BM7000S

    Is it just me or has anyone else noticed since installing this update that the Blade tends to "lock up" and become unresponsive? The only way to use it again is to power off and boot back up.


    I have gone back to the January software and will keep an eye on it.

  • Services-file

    Right I have got my csp working. I am using dreambox 500s to read card with oscam+cccam. I have set up a services file in the config and created the appropriate directory. My problem is not all channels show under session. I assume that the file is incomplete.


    I have previous knowledge of editing cccam channel info. Does this sevices file work the same as that as in find the channel id and edit accordingly and/or add any new channels which are not listed.


    Im confused. Any help in explaining the format of the line would be very much appreciated.