Agree, DVB-S will whip any IPTV stream
Posts by thatfellow
-
-
Quote
Worth bearing in mind that channel details are kept in memory so mereley deleting may not be effective as they may be written back on restart. Some bouquets (owing to names) are not recognised/replaced by programs such as Dreamset.
Try following telnet commands one by one.
Thankyou, I will try that
QuoteJust use the "clear before scan" option in the blindscan plugin, thats what it's there for.
I did that the very first time I attempted this, that only cleared the "Last Scan" folder. Al bouquets and entries in lamedb remained..
I attempted to delete the full contents of the enigma2 folder & do a blind scan but on completion & restart, the new lamedb file still contained entries for 28.2 & slyuk after a blind scan for 16.0E for example.
I also un-installed catseye settings, cleared the enigma2 folder & restarted & did a blind scan of 16.0E but I still did not get a 16.0E only lamedb file..
Is there some kind of backup built into ViX to prevent the lamedb file from being cleared & repopulated with scan results?
-
No steve, cos its the main box for the kids n missus.. Ill try tonight when the coast is clear...
Not sure if I should clear the lamedb file or delete it but Ill do an image backup & have a play tonight..
I was hoping there was an option in ViX to wipe all channels & clear lamedb... -
Is there an easy way to clear all channel lists & lamedb file on VU+ solo2 running ViX?
I want to do blind scans on a few sats and have a clean lamedb file for each scan..Im not sure if its as simple as deleting the lamedb file & all bouquets from /etc/enigma2
-
So here is the growing list as of today..
2710 ITV Encore HD
0F15 *** 1 HD
0F19 *** 1 HD
0F17 *** Arts 1 HD
0F4A *** Arts 2 HD
0F0D *** Atlantic HD
0F1A *** Living HD
0F47 *** Showcase HD
0EED *** Movies Premiere HD
0EE7 *** Movies Greats
0F3C *** Disney HD
0EEA *** Family HD
0EE6 *** Action HD
0EEB *** Comedy HD
0F16 *** Thriller HD
0EE8 *** Drama HD
0EE9 *** Scifi/Horror HD
0F3D *** Select HD UK
0FA3 *** Sports 1 HD
0FA1 *** Sports 3 HD
0EF2 *** Sports HD 4
0EF3 *** Sports 4 HD
0FA4 *** Sports 4 HD
0EF8 National Geographic HD UK
0F2D NatGeo Wild HD
0F2E History HD
0F30 Crime HD -
Yes post your cccam.cfg, also post your rc.local & crntab files located @ /etc/
I think cccam is taking over your omnikey..Back to point 2) did pcsc_scan show the reader as recognised by the system and numbered as "0"
here is the start of the output from pcsc_scan on my system:
Code
Display MorePC/SC device scanner V 1.4.20 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr> Compiled with PC/SC lite version: 1.8.3 Using reader plug'n play mechanism Scanning present readers... [COLOR='#FF0000']0[/COLOR]: OMNIKEY CardMan (076B:3021) 3021 00 00 1: OMNIKEY CardMan (076B:3021) 3021 01 00 2: OMNIKEY CardMan (076B:3021) 3021 02 00 Wed Jun 4 08:44:30 2014 [COLOR='#FF0000']Reader 0[/COLOR]: OMNIKEY CardMan (076B:3021) 3021 00 00 Card state: Card inserted, Exclusive Mode,
-
add this to your [global] settings in oscam.conf
also change
also change or remove
(previously set to 5ms = instant timeout, lol)& remove
and restart oscam or server
Actually, just try Dump in these settings & restart
Code[global] logfile = /var/log/oscam.log nice = -1 maxlogsize = 1000 clienttimeout = 5000 emmlogdir = /var/log/ ecmfmt = |c:p:s:l|e|w|
Also m8, If you are using 2 or more [readers]
add this to oscam.conf [global] settings to prevent request being sent to all readers& post startup & zapping logs
-
All these firmwares were posted a long time back, even if they were completely reversed they would not unlock the HDVide0Guard, they might shed some light on how the receiver ID is generated and how the CW is handled.
But that would only be a fraction of the problem, then there would need to be unique dump of each paired receiver.. -
Quote
sorry mate but i followed the above to the letter and it's not clearing.
regards: canthackit
So little information here that nobody could possibly help you m8, post oscam startup log & log from zapping a few channels
-
Quote
This only downloads the firmware updates from the stream, no solution for the problem :(
-
Just noticed this in your log..
Quotemypcscreader [pcsc] Error getting card status.
1... Have you got cccam running on this pc also? I have seen issues where cccam starts before oscam and locks the reader from oscam..
2... Did you install pcscd and pcsc-tools? if not install those and then run pcsc_scan to confirm device is recognised by the system and the device is Reader 0:
3... Try these basic pcsc reader settings (Note1, there is no need for mhz = 500 with omnikeys, Note2 you were blocking unique EMMs with this line blockemm-u = 1, that will stop your card receiving updates and eventually the card will go off)Code
Display More[reader] label = ***uk protocol = pcsc device = 0 caid = 0963 detect = cd ident = 0963:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-s = 1 blockemm-g = 1 saveemm-u = 1 auprovid = 000963
Lastly, you have no [cccam] entry in oscam.conf so you will not be able to use clines in your client boxs, only nlines..
-
Quote
Thank you Thatfellow
I am after trying as you stated and still That does not work. I have only Amiko Alien 2 (triple tuner) and an old DM 500s. I know you have one of your image set up to go (Commando+ oscam+cccam 2.1.3). I am too familiar setting up Amiko as server, however I have that that mini plugin with all settings in it. Which one is recommended to use for the update?
Thank you
Im sorry m8, but I would not trust an Amiko Alien as a door stop never mind set it up for this...
That is probably not fair as I have never owned one, I've just read the horror stories :laugh:You could use the DM500s, great little box, that image backup of mine is a bit old, look for a newer backup with oscam then get the dvbapi configs for your card (They might already be loaded on the backup)
Before you do any of that, post your current configs..
TF
-
Its a media server that streams to all DLNA devices on your network..
secret website -
Quote
I did make a backup of my image but im not sure if i can use it to restore the box....?
If you cant use it to restore the box, It would not be much of a backup image :laugh:
-
Why svn9584? This is also old and very buggy...
Use this thread to build your own oscam that you will know 100% is compiled for your setup..
Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild -
Quote
I am using a THOMSON *** HD, model/ Serial 4E3
This is one of the series that could not been paired some time ago
I ALSO update my oscam to SVN 9727Any suggestions as no of my HD channels seem to be working. Some were clearing last night. But now only SD are OK including Sports and Movies
Thanks in advance
Fulgas
All sports HD are ok at the minute, here are the Channels affected by Sly's new HD Pairing so far..
2710 : ITV Encore HD
0F15 : *** One
0F19 : ***1 HD
0F17 : *** Arts 1 HD
0F4A : *** Arts 2 HD
0F0D : *** Atlantic HD
0F1A : *** Living HD
0F47 : *** Showcase HD
0EED : *** Movies Premiere HD
0EE7 : *** Modern Greats HD
0F3C : *** Disney HD
0EEA : *** Family HD
0F16 : *** Thriller HD
0EE8 : *** Drama HD
0EE9 : *** Scifi/Horror HD
0F3D : *** Select HD UK
0EF8 : National Geographic HD UK
0F2D : NatGeo Wild HD
0F2E : History HD
0F30 : Crime HDThat Thomson box should not have Paired ur card up because (as far as I am aware) it can't take the new firmware & Receiver ID
Go to Oscam Webif / Config / Loadbalancer
At the bottom of the page click: Clear Stats, Clear Timeouts & Clear Not FoundsGo and test the Channels again..
If that does not work..
Setup your card in a STB with dvbapa & run for a few days, that worked for me when I had a similar issue..
-
Quote
I too have noticed this recently - have gone back to oscam 9691 - now seems OK again
Fingers crossed
By this do you mean the once an hour freeze in original post or the regular freeze on Eden +1
If you mean the latter, I'm pretty sure its not an oscam version issue, I tested a huge range of oscam's last night and they all behaved pretty much the same.
It has stopped now because they have more than likely finished their tests.. -
Quote
My anger is. have a vu + SOLO2 and not to use it in hd.
I use to force the decoder ***.
if not, I burn the card.
but not for long because I expires in two months.
and do not pay a penny moreVU+ Solo2 is one hell of a piece of kit m8, it most certainly does not need to be connected to Sly to earn its keep..
Get yourself a motor or multi LNB setup and you will get pretty much everything your missing on Sly.. -
SVN r9755 Modern Webif Version - Compressed & Normal (In case compressed does not work)
oscam-svn1052-mipsel-webif.rar
Assuming that check scripts etc are in place..
1.. FTP oscam-svn1052-mipsel-webif-compressed to bin folder
2.. Rename old bin by adding _OLD to the end of the filename
3.. Rename the new one to whatever the old one was
4.. chmod 777 the new fileRestart box
-
If anyone can tell me what toolchain to use to compile oscam for DM800 clone with Nemesis image, I will compile the latest build for you.
TF