Posts by paulus

The oscam log contains the following re. the channel I want to open with a BISS key:

2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
2017/10/19 15:32:21 1856 749FF4A0 c linuxsatsupport (2600&000000/0001/1FFF/0000/03:0000/00-00): not found (0 ms) - 2600:0001 unknown
2017/10/19 15:32:50 1856 749FF4A0 c dvbapi: [ADD PID 0] CAID: 2600 ECM_PID: 1FFF PROVID: 000000

Am I correct in assuming that I need to add the line to constant.cw which currently has very few lines, or a different format line to SoftCam.Key where most of the BISS keys appear to be? If the latter, then I assume the line is:-

F 00011FFF 00 Key

F 00011FFF 01 Key

But since this is identical to many other lines in my SoftCam.Key file I'm at a loss to know how oscamymod finds the right one?

Please excuse my ignorance - I am trying hard to learn.

Please excuse me jumping in on this thread - which is of great interest to me.

Where will I find the oscam log? (using OpenBH and oscam-ymod)

I am using OpenBH 0.4. My question: is there a key updater plugin that works with this image, and if there a a few which do people recommend?

I guess if the master cannot get it to work on the Sol2 - then it probably never will!!

Thanks masterG

Has anyone got this to work? Mobdro runs great on my android and windows devices, but ideally I would like it to run on my Solo2 (which is connected to my main TV). It seems to install OK in Kodi but fails to run with an error every time. Just wondering whether this should be possible and I am missing something, or whether this will never run on my Solo2. Any advice would be most welcome.

That's it masterG! Unfortunately I was using an MX skin which never showed that option, it was only when I reverted to the default skin that I found it and switched it off. Must remember that for future reference. Many thanks.

You're right masterG - not what I was looking for. I still want the ecm info to display - but in the lower info bar after a second "OK". I cannot believe this feature has been removed, but I just cannot find where it has been relocated to?

If I remember correctly there used to be a "Hide ecm info" toggle in menu>setup>customisation section of earlier BH images which switched off the top thin bar with ecm info on changing channel. I cannot find it in BH3.0.2I 0 can anyone help?

I have been using a simple cccam configuration which has worked very well as a client. However, thought I would try to get the ESPN channels on 15W. I installed oscam-ymod with cccam 2.3.0 (I am using OpenBH 0.4) and get the client working for my cline - now for the oscam bit. I downloaded latest keys, opened the oscam.keys file and looked in the BISS keys section, but could not find an ESPN line to edit, also the key text file had info such as ESPN Caribbean (Caribbean 901); B8hx00h TABLE followed by the key. This looks very different to the format of the entries in oscam.keys. What is the exact format I need to make a new entry in oscam.keys?

Thanks for any help.

sorry ferdi, I thought it was straight forward. My Solo2 is wifi connected to my router on a fixed local IP. Android app (phone) is wifi attached to the same router. Set app using correct ip, port, user and password. then works fine, config is remembered for next use and connects automatically. However, for remote use I use a no-ip address with ports forwarded, etc. When connecting from a remote location I need to manually configure and the apps main page does not remember the "local" configuration, so still only one box configured. Remotely then works fine. However, on return to "local" (LAN) connection, again need to reconfigure (I wish I could have two configurations saved) the app with local ip etc. but connection always "fails" until I reboot the Solo2. Don't switch between them too often, but would like to have the app "remember" two configs under different names (eg "local" and "remote") so I can select at will, and would like to be able to reconnect to the Solo 2 after returning to local config without a restart of the Solo2.

Have set up OpenWebif and access my Solo2 through the Vu+ PlayerHD android app. Two issues (hoping someone can solve for me):
1. I would like to set up a local and a remote configuration, but the app only seems to ever remember one meaning I have to reconfigure each time I switch between modes
2. Once I have configured for remote access, switching back to local always gives "Connection fail" - the only solution being to restart the Solo2.

Am I doing something wrong?

I have a Vu+ Solo2 running OpenBH and want to setup a new user and password (not root) specifically for Openwebif. How do I do this?

I may be off track here, but I remember having this problem some time back, and as I remember it was sorted by setting "prefer audio track stored by service" to "no" in the auto language settings.

Photo attached - is my data now complete?

01398277a.jpg

[MENTION=41319]Prophet[/MENTION], I will gladly include a photo - but is an unopened box any good? My username? - my forum user name is obvious, what other user name is required. Date and LSS?? - I have no idea what these are or mean. Please explain.

Hi,

I was lucky enough to win this in the recent lottery draw (see http://linuxsat-support.com/sh…-SE?highlight=mars+raffle) but am unable to make use of it. If anyone would like to buy it (box has never been opened) then it's yours for £50. Post and pack would be £5 or free to a VIP member.

master G. The bootloader you link me to is in a subfolder called /solo (not /solo2) - is this correct for the solo2?

Have run CacheFlush - no difference to (what I believe to be) my problem. Image shows the indicator which has hit 100% (no addons installed) and when this happens all addons would freeze. What does this read on your system?

7326b75fda3c5d978f0a.jpg

Don't believe this is a Genesis issue. Even with Genesis now removed (absolutely no addons installed) Memory used still shows 100% in xbmc>system>system info and it was with coincidence with this that xbmc would freeze trying to do anything (at thew time with Genesis). This system (2.1.7 was built from a backup) although I had the same result from starting from scratch AND with using a backup of 3.0.1. I have even had the motherboard replaced. The only thing not changed is the HDD. Every BH image starts off in xbmc showing "Memory used" at about 20% which within a few days gets up to 100% and freezes happen - but no-one seems to know what the "Memory used" is measuring!!

- - - Updated - - -

master g - how do I use these plugins? Regarding a regular reboot I have my doubts since the box has been power-cycled a number of times since I gave up using xbmc but it is still showing Memory used 100%.

I have attached a screenshot of my system info - any clues?

641267013370290e98baa80.jpg

Dreambox player not on Play Store (or at least I can't find it). Also network is OK - I'm using local network and Openwebif works fine to my PC, as well as Channel List and EPG work fine on Vu+ PlayerHD. Gor me scuppered I'm afraid.