Enigma2 Receiver Flashing

How to flash your Dreambox DM8000 with DreamUp
You require:
(Hidden Content)





First disconnect the box from main power

start the program "DreamUp


select: comport 1 or 2

use network

if network: enter the local IP from your PC, enter a remote IP for your Box


press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware…

How to flash your Dreambox DM800 with DreamUp
You require:
(Hidden Content)




First disconnect the box from main power

start the program "DreamUp


select: comport 1 or 2

use network

if network: enter the local IP from your PC, enter a remote IP for your Box


press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware…

Flashing a new firmware by Browser

What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.

You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm.

You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a…

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If…

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If successful…

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image possible.
4) Power the receiver on.
5) When instructed via the receivers display flashing process.
7) If successful the receiver will reboot it self after the flashing process has completed.
8) Remove USB stick that contains the images files.

(Hidden Content)