Enigma2 Tuner Setup

Enigma2 tuner setup guides — configure satellite, cable and terrestrial tuners and LNB settings on your receiver.

Stored Position Tuner Setup

This guide sets up stored satellite positions on a motorised dish using DiSEqC 1.2 — first configuring the tuner and satellite (Stage 1), then using the satfinder and positioner to physically move the motor and store each position (Stage 2). You'll repeat both stages once per satellite you want the motor to remember.
Stage 1: Configure the tuner and satellite
Go to Main Menu \ Setup \ Service Searching \ Tuning and press OK on TUNER A.
http://img338.imageshack.us/my.php?image=40440488.png
Use…
master G
Like 4
1

GT-Sat GT-dLNB1DY and tuner configuration

This guide shows how to configure the GT-Sat GT-dLNB1DY (also sold as GT-Sat GT-S3DCSS24, generic name dLNB Hello) Unicable LNB on an FBC-tuner receiver, using a single signal/coaxial wire with no splitters — giving you up to 8 independent tuners (A–H) from that one wire.
Before you start
FBC and Unicable are two separate technologies. You can use a Unicable LNB with a non-FBC tuner (e.g. Dreambox 500, Vu+ Solo 2, Technomate Nano 3T Combo), and you can use an FBC tuner with a universal (normal)…
abu baniaz
Like 2
0

Brief description of an FBC tuner

What an FBC tuner is, how its physical and leaf tuners work, and how the "connected" option links them.
abu baniaz
Like 1
0

Unicable LNBs and motorised dishes

Why Unicable LNBs and motorised dishes don't mix — and the right hardware for multi-user, multi-satellite setups.
abu baniaz
Like 1
0

Guide to using Unicable

A full guide to using Unicable / Unicable 2 (JESS) LNBs — how they work, what to buy, and example multi-tuner layouts.
abu baniaz
Like 2
0