Gigablue

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If…

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If successful…

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image possible.
4) Power the receiver on.
5) When instructed via the receivers display flashing process.
7) If successful the receiver will reboot it self after the flashing process has completed.
8) Remove USB stick that contains the images files.

(Hidden Content)