Good morning.
I still have problems with the tivusat 4K module and openatv 7.3 or 7.4 images.
I have vu+ duo4kse. and use latest version of ci+ helper
The image appears for 1 second then freezes.
A solution ?
Thanks in advance
Good morning.
I still have problems with the tivusat 4K module and openatv 7.3 or 7.4 images.
I have vu+ duo4kse. and use latest version of ci+ helper
The image appears for 1 second then freezes.
A solution ?
Thanks in advance
check the 10th item ===>High bitrate support if it is set to YES
Good morning. I have the choice between normal, high and extra high. Normal doesn't work, and the other 2 don't solve the problem
i have tivu 4k cam works without issue helper 5.8
i have tivu 4k cam works without issue helper 5.8
hello, what image, version and decoder?
test with vusolo4k vuduo4k openatv 7.3 and 7.4
hello,
I was helped elsewhere and the problem came from the tuner, I had to invert the 2 tuners in the decoder
what do you mean by inverting? i have a simmilar problem, when i reboot the box canale 5 is working, but as soon as i switch even to rai 1 its not working anymore even if there is no encryption, why is that
Open dreamxplorer- install enigma2-plugin-systemplugins-ciplushelper_5.3-r1_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
restart the tuner.
It has been operational since January 11, 2024 on Open ATV 7.4, Open Blackhole 5.3, Open Vix 6.4 images on the VU+ Uno4k and Zero4k box.
Ciao, ho un axas e4hd, ma ho problemi a fare leggere la card 4k con relativa cam TVsat , si vede per un po' e poi si blocca... Ho aggiunto tutti i caid e installato ciplushelper 5.8. qualche aiuto? Grazie
Google Translate - Hello, I only have access to VU+ tuners and the CANAL PLUS 4K ECP card in them.
After uploading the image, for example openATV 7.3 and the dreamexplorer plugin, proceed exactly as follows:
install enigma2-plugin-systemplugins-ciplushelper_5.3-r1_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
restart the tuner.
It still works for me......
ought Bronze, Accessdenied on link https://www.linuxsat-support.c…lushelper-5-8-r2-all-ipk/
Why???
there are no prohibitions, everything is downloaded, look for a problem in your computer, try to disable antivirus software, and so on, everything that can block downloading.
this is only for open ATV or also works in open pli?
i installed it in open pli but cant find it anywhere
need it for kabelio module because rtl channels dont work without ci+
Hi,
I've been dealing with this issue for sometime and now trying different solutions and would appreciated feedback from CI+ pros.
So, I have two modules (Kablio Panaccess & M7 Cam 803 Nagra) using them on Zgemma H9 Twin (1st version) with Oatv 7.3.20240315 (2024-01-30) (which was downloaded from receivers recovery menu) and Kernel / Drivers: 4.4.35 / 20201118.
I have installed Panaccess Cam on Slot 1 and M7 Nagra on Slot 2 and initially with Ci+ Helper 5.8-r2 (downloaded from here) both modules work perfectly for a few hours (less than 12 hours, i think) or after there's been many channel changes on M7 module then Slot 1 (Panaccess) becomes ''module not found'' and basically out of use and I need to do a turn-off/on of the box for Slot 1 to become useful again. This ''module not found'' problem only affects Slot 1(Panaccess) and even after the message appears the other Slot with M7 functions normally!
I have enabled/disabled high bitrate option, added services to common interface assignment and still no improvement in the situation.
I switched Cams places but another problem appeared! This time M7 at Slot 1 works either for a few seconds or as long as other Slot 2 with Panaccess is not started to decode a channel!
At the moment I'm trying Ci+ Helper 5.5-r0 instead of 5.8-r2 with original setting of Panaccess on Slot 1 and M7 on Slot 2 to see if it helps anything.
What could be the problem? and what image is more stable for operating two Ci+ cams? (although only M7 needs Ci+ to function and it would have been helpful to be able to disable CI/CI+ for each slot independently of the other one)
What could be the problem? and what image is more stable for operating two Ci+ cams
openpli developer RE: Plugin CI+ for openpli 8.x
Display MoreHi,
I've been dealing with this issue for sometime and now trying different solutions and would appreciated feedback from CI+ pros.
So, I have two modules (Kablio Panaccess & M7 Cam 803 Nagra) using them on Zgemma H9 Twin (1st version) with Oatv 7.3.20240315 (2024-01-30) (which was downloaded from receivers recovery menu) and Kernel / Drivers: 4.4.35 / 20201118.
I have installed Panaccess Cam on Slot 1 and M7 Nagra on Slot 2 and initially with Ci+ Helper 5.8-r2 (downloaded from here) both modules work perfectly for a few hours (less than 12 hours, i think) or after there's been many channel changes on M7 module then Slot 1 (Panaccess) becomes ''module not found'' and basically out of use and I need to do a turn-off/on of the box for Slot 1 to become useful again. This ''module not found'' problem only affects Slot 1(Panaccess) and even after the message appears the other Slot with M7 functions normally!I have enabled/disabled high bitrate option, added services to common interface assignment and still no improvement in the situation.
I switched Cams places but another problem appeared! This time M7 at Slot 1 works either for a few seconds or as long as other Slot 2 with Panaccess is not started to decode a channel!
At the moment I'm trying Ci+ Helper 5.5-r0 instead of 5.8-r2 with original setting of Panaccess on Slot 1 and M7 on Slot 2 to see if it helps anything.
What could be the problem? and what image is more stable for operating two Ci+ cams? (although only M7 needs Ci+ to function and it would have been helpful to be able to disable CI/CI+ for each slot independently of the other one)
After a few days using Ci+ Helper 5.5-r0 as well as Slowzap plugin I can not see any changes in my situation and still after 10-12h of uptime of the box the module in slot 1 would become ''module not found''. At this point nothing works but a turn-off/on of the box. I have tried GUI restart and Slowzap force init without any success.
It would be appreciated to have an OpenATV/Ci+ Helper developer's input on this issue.
Don’t have an account yet? Register yourself now and be a part of our community!