Good morning.
I still have problems with the tivusat 4K module and openatv 7.3 or 7.4 images.
I have vu+ duo4kse. and use latest version of ci+ helper
The image appears for 1 second then freezes.
A solution ?
Thanks in advance
CI+ Helper Plugin for OpenATV
- W@Rp
- Thread is marked as Resolved.
-
-
check the 10th item ===>High bitrate support if it is set to YES
-
Good morning. I have the choice between normal, high and extra high. Normal doesn't work, and the other 2 don't solve the problem
-
i have tivu 4k cam works without issue helper 5.8
-
i have tivu 4k cam works without issue helper 5.8
hello, what image, version and decoder?
-
test with vusolo4k vuduo4k openatv 7.3 and 7.4
-
hello,
I was helped elsewhere and the problem came from the tuner, I had to invert the 2 tuners in the decoder
-
what do you mean by inverting? i have a simmilar problem, when i reboot the box canale 5 is working, but as soon as i switch even to rai 1 its not working anymore even if there is no encryption, why is that
-
Open dreamxplorer- install enigma2-plugin-systemplugins-ciplushelper_5.3-r1_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
restart the tuner.
It has been operational since January 11, 2024 on Open ATV 7.4, Open Blackhole 5.3, Open Vix 6.4 images on the VU+ Uno4k and Zero4k box.
-
Ciao, ho un axas e4hd, ma ho problemi a fare leggere la card 4k con relativa cam TVsat , si vede per un po' e poi si blocca... Ho aggiunto tutti i caid e installato ciplushelper 5.8. qualche aiuto? Grazie
-
Google Translate - Hello, I only have access to VU+ tuners and the CANAL PLUS 4K ECP card in them.
After uploading the image, for example openATV 7.3 and the dreamexplorer plugin, proceed exactly as follows:
install enigma2-plugin-systemplugins-ciplushelper_5.3-r1_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
install enigma2-plugin-systemplugins-ciplushelper_5.8-r2_all.ipk,
restart the tuner.
It still works for me......
-
ought Bronze, Accessdenied on link https://www.linuxsat-support.c…lushelper-5-8-r2-all-ipk/
Why???there are no prohibitions, everything is downloaded, look for a problem in your computer, try to disable antivirus software, and so on, everything that can block downloading.
-
-
this is only for open ATV or also works in open pli?
i installed it in open pli but cant find it anywhere
need it for kabelio module because rtl channels dont work without ci+
-
this is only for open ATV or also works in open pli?
i installed it in open pli but cant find it anywhere
need it for kabelio module because rtl channels dont work without ci+
-
Hi,
I've been dealing with this issue for sometime and now trying different solutions and would appreciated feedback from CI+ pros.
So, I have two modules (Kablio Panaccess & M7 Cam 803 Nagra) using them on Zgemma H9 Twin (1st version) with Oatv 7.3.20240315 (2024-01-30) (which was downloaded from receivers recovery menu) and Kernel / Drivers: 4.4.35 / 20201118.
I have installed Panaccess Cam on Slot 1 and M7 Nagra on Slot 2 and initially with Ci+ Helper 5.8-r2 (downloaded from here) both modules work perfectly for a few hours (less than 12 hours, i think) or after there's been many channel changes on M7 module then Slot 1 (Panaccess) becomes ''module not found'' and basically out of use and I need to do a turn-off/on of the box for Slot 1 to become useful again. This ''module not found'' problem only affects Slot 1(Panaccess) and even after the message appears the other Slot with M7 functions normally!I have enabled/disabled high bitrate option, added services to common interface assignment and still no improvement in the situation.
I switched Cams places but another problem appeared! This time M7 at Slot 1 works either for a few seconds or as long as other Slot 2 with Panaccess is not started to decode a channel!
At the moment I'm trying Ci+ Helper 5.5-r0 instead of 5.8-r2 with original setting of Panaccess on Slot 1 and M7 on Slot 2 to see if it helps anything.
What could be the problem? and what image is more stable for operating two Ci+ cams? (although only M7 needs Ci+ to function and it would have been helpful to be able to disable CI/CI+ for each slot independently of the other one)
-
What could be the problem? and what image is more stable for operating two Ci+ cams
openpli developer
RE: Plugin CI+ for openpli 8.x -
Display More
Hi,
I've been dealing with this issue for sometime and now trying different solutions and would appreciated feedback from CI+ pros.
So, I have two modules (Kablio Panaccess & M7 Cam 803 Nagra) using them on Zgemma H9 Twin (1st version) with Oatv 7.3.20240315 (2024-01-30) (which was downloaded from receivers recovery menu) and Kernel / Drivers: 4.4.35 / 20201118.
I have installed Panaccess Cam on Slot 1 and M7 Nagra on Slot 2 and initially with Ci+ Helper 5.8-r2 (downloaded from here) both modules work perfectly for a few hours (less than 12 hours, i think) or after there's been many channel changes on M7 module then Slot 1 (Panaccess) becomes ''module not found'' and basically out of use and I need to do a turn-off/on of the box for Slot 1 to become useful again. This ''module not found'' problem only affects Slot 1(Panaccess) and even after the message appears the other Slot with M7 functions normally!I have enabled/disabled high bitrate option, added services to common interface assignment and still no improvement in the situation.
I switched Cams places but another problem appeared! This time M7 at Slot 1 works either for a few seconds or as long as other Slot 2 with Panaccess is not started to decode a channel!
At the moment I'm trying Ci+ Helper 5.5-r0 instead of 5.8-r2 with original setting of Panaccess on Slot 1 and M7 on Slot 2 to see if it helps anything.
What could be the problem? and what image is more stable for operating two Ci+ cams? (although only M7 needs Ci+ to function and it would have been helpful to be able to disable CI/CI+ for each slot independently of the other one)
After a few days using Ci+ Helper 5.5-r0 as well as Slowzap plugin I can not see any changes in my situation and still after 10-12h of uptime of the box the module in slot 1 would become ''module not found''. At this point nothing works but a turn-off/on of the box. I have tried GUI restart and Slowzap force init without any success.
It would be appreciated to have an OpenATV/Ci+ Helper developer's input on this issue.
-
CI+ Cam module don't work screen black any solution for this reason ?
-
Your resource for Enigma2 system utility plugins
Find downloads and support for tools that monitor performance, manage system settings, provide detailed system info, and automate maintenance. Discover essential Enigma2 system utility plugins. Access downloads and support for performance monitors, maintenance tools, and system information managers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
