Δεν ανηκει στην ενοτητα μας,αλλα κυριως τα ελβετικα,βεβαια εδω αποκρυπτογραφουνε κι αλλα συστηματα.Εχω εναν Vu+ zero 4k-κυριως τον δουλευω με OpenBH(στο multiboot με στικακι VTI)και βλεπω απο 52Ε μεχρι 31,5W(με ροτορα βεβαια)
oscam-emu και BISS
- .:T3O:.
- Thread is marked as Resolved.
There are 324 replies in this Thread which was already clicked 36,927 times. The last Post () by vasilis1985.
-
-
μαλιστα...
απο ελβετικα,τα κρατικα του hotbird δε θα τα δεις με emu, αλλα μονο με c.s. στις 9Ε ομως,εχει καποια free (W9, M6...)
με emu ομως,μπορεις να ανοιξεις αρκετα καναλια (σε διαφορες γλωσσες) ντοκυμανταιρ στις 5Ε και στις 0.8W (τα κοινως λεγομενα powervu,οπου θα βρεις πολλες συζητησεις...)
το ελληνικο ant1 europe στις 9Ε
και επισης ενα μικρο αθλητικο πακετακι (arena) στις 1.9Ε
και φυσικα σε πολλους δορυφορους,απο κανενα ξεμπαρκο...
-
Το Ant1 δε το ξερα οτι ανοιγει,θα το δοκιμασω-και τα αλλα βεβαια,ειμαι περιεργος,αν θα δουλεψουνε με αυτο που εχω.Δε βλεπω μερικα με b#ss,που βλεπω με αλλον δεκτη-μαλλον δε θαναι ολα περασμενα.Περιεργως βλεπω δυο διαφορετικες λιστες,αλλα προφανως τα παιρνει απο κει που γραφει ο oscam.server.
-
Εχει Εργοτελη-ΠΑΟΚ στο arena3
-
Δε τοχω δει
-
υπαρχει τροπος να αλλαξεις την διαδρομη τις oscam που διαβαζει τα config?
π.χ. τωρα ειναι στο etc/tuxbox/config/oscam-emu
ειμαι με nino+ και satdream με την τελευταια oscam
-
ναι γινετε με telnet πχ /usr/bin/oscam-emu -c /etc/tuxbox
-
Προσπάθησα αλλά δεν το δέχεται τι κάνω λάθος; θέλω να βάλω στο oscam-emu κάτω παυλα_
QuoteTrying 192.168.1.100...
Connected to osninoplus.lan.
Escape character is '^]'.
satdreamgr-openpli 5 osninoplus
osninoplus login: root
Password:
root@osninoplus:~# /usr/bin/oscam-emu -c /etc/tuxbox/config/oscam_emu
Warning: keyword 'cacheex_maxhop' in reader section not recognized
Warning: keyword 'cacheex_allow_request' in reader section not recognized
Warning: keyword 'cacheex' in reader section not recognized
Warning: keyword 'cacheex_maxhop' in reader section not recognized
Warning: keyword 'cacheex_allow_request' in reader section not recognized
-
ειναι ανενεργός ο oscam οταν το κανεις???
και υπαρχει ο φακελος oscam_emu ??/
-
Όχι ενεργό είναι το oscam το φάκελο με το oscam_emu τον έφτιαξα πριν δώσω την εντολή δεν έπρεπε;
-
δωσε killall -9 oscam-emu για να σταματήσει ο oscam
και μετα το πιο πανω
-
Οκ το βρηκε:thumbup::thumbup::thumbup:
-
Καλημερα. εχω εναν dreambox 800se με pli4. Μέσα από το μενου του δέκτη δε μπορώ να κατεβάσω το oscam γιατι δεν το εχει καν. Πως μπορώ να το βάλω χειροκίνητα? Ευχαριστώ..
-
Κατεβάζεις το ipk και το βάζεις στον tmp φάκελό. Μέρα απ το μενού του δέκτη σου ψάξε να δεις που είναι η χειροκίνητη εγκατάσταση πρόσθετων
-
Χαιρετώ την παρέα
Έχω Open ATV που βάζω τα μπισκότα για την ΕΡΤ στον Hellas Sat ρε παιδιά??
Και τι μορφή έχουν τα μπισκότα καθότι είμαι νέος στους Linoux !!
-
Διαβασε το νημα Digea 3.1°e & EΡΤ 39°e
-
εναν τροπο να περασει oscam σε openatv 6.3 σε Octagon 8008..??
-
ο πιο ευκολος τροπος ειναι απο τα secret feed
-
που ειναι τα secret feed?γιατι emu στα προσθετα,δεν εχει εδω και πολυ καιρο το openatv..
-
στο satdream ειχαμε αναφέρει
QuoteSoftcam Feed for OpenATV (as of June 2019)
This is not a softcam control panel, It just allows you to install softcams from the plugin server. The softcams on the secret/softcam feed do not work with softcam panel. If the softcam panel is that important to you, please do not install this feed and find softcams that use the old method.
Installation of the secret/softcam feed
Option A:
(Part quote of Spacerat)
The easiest method of getting a shell session to the box is the "Terminal" in OpenWebif, but feel free to use puTTy or whatever you already use.
That one-liner makes sure you get the latest version of the feed for your actual image version and architecture.
No need to download the IPK, copy it to the box and installing it through GUI or shell when using the one-liner but you are still free to use an IPK, if you insist on it.
Use version 4.3r2 or later in that case.
The new feed supports OpenATV 5.3 through 6.3, that is "the last 5 versions of OpenATV".Code:
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
Option B:
Transfer ipk to /tmp
On receiver, press
Menu > Setup > Software management > Install local extension > OK
Select /tmp/ and press OK
Click OK to Install extensions
List of ipks will be shown.
Select the one you want. Ensure it has a tick by pressing OK then press Green to install
Option C:
Transfer ipk to USB stick
Ensure that no menus are showing on TV
Insert USB stick, you will be prompted to install ipks
List of ipks will be shown.
Select the one you want. Ensure it has a tick by pressing OK then press Green to install
Stage 2: install softcams
Once you install the softcam feed, restart the receiver.
To install softcams:
Menu > Plugins > Green (download plugins) > scroll to softcams and press OK> Select the one you want and complete installation
To avoid issues, restart receiver
Stage 3: Edit/transfer your config files
The softcams on the softcam feed use the following locations for config files
mgcamd in /usr/keys (same as before as well as other images)
CCcam in /etc (now same as other images)
OsCam in /etc/tuxbox/config/oscam-xxxx (now same as other images)
Stage 4: Activate/control Softcams
Red > Softcam setup
or
Menu > Setup > Decryption and Parental control > Softcam Setup
Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.
Φόρουμ γερμανικά LinuxSat
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!