I tried deleting ncam.provid, srvid2 and services, but still nothing works. Any help please?
Which other ncam configs do you have? ncam.conf with dvbapi enabled?
What does the ncam log show you in the webinterface?
I tried deleting ncam.provid, srvid2 and services, but still nothing works. Any help please?
Which other ncam configs do you have? ncam.conf with dvbapi enabled?
What does the ncam log show you in the webinterface?
master G i checked my configs. Server works now, but all AFN channels are down. I have the latest configs from here.
2022-07-04 17:17:29 3980B622 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 2 enabled and 0 disabled ecmpids!
2022-07-04 17:17:29 3980B622 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1781 ANY CHID PMTPID 13EF VPID 061D
2022-07-04 17:17:37 3980B622 c (ecm) dvbapiau (P: 0E00::0067:1781:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (2 ms) - AFN (no matching reader)
2022-07-04 17:17:37 3980B622 c (-) -- Skipped 1 duplicated log lines --
2022-07-04 17:17:37 3980B622 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BC9 ANY CHID PMTPID 13EF VPID 061D
2022-07-04 17:17:38 3980B622 c (ecm) dvbapiau (P: 5604::0067:0BC9:0000 #ECM_L:3D #CW=00000000000000000000000000000000 HOP:00): rejected group (2 ms) - AFN (no matching reader)
2022-07-04 17:17:38 3980B622 c (ecm) dvbapiau (P: 5604::0067:0BC9:0000 #ECM_L:3D #CW=00000000000000000000000000000000 HOP:00): rejected group (1 ms) - AFN (no matching reader)
2022-07-04 17:17:38 3980B622 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 2 enabled and 0 disabled ecmpids!
2022-07-04 17:17:38 3980B622 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1781 ANY CHID PMTPID 13EF VPID 061D
2022-07-04 17:17:47 3980B622 c (ecm) dvbapiau (P: 0E00::0067:1781:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (2 ms) - AFN (no matching reader)
2022-07-04 17:17:48 3980B622 c (-) -- Skipped 1 duplicated log lines --
2022-07-04 17:17:48 3980B622 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BC9 ANY CHID PMTPID 13EF VPID 061D
2022-07-04 17:17:49 3980B622 c (ecm) dvbapiau (P: 5604::0067:0BC9:0000 #ECM_L:3D #CW=00000000000000000000000000000000 HOP:00): rejected group (1 ms) - AFN (no matching reader)
2022-07-04 17:17:49 3980B622 c (-) -- Skipped 1 duplicated log lines --
2022-07-04 17:17:49 3980B622 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 2 enabled and 0 disabled ecmpids!
2022-07-04 17:17:49 3980B622 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1781 ANY CHID PMTPID 13EF VPID 061D
2022-07-04 17:17:57 3980B622 c (ecm) dvbapiau (P: 0E00::0067:1781:0000 #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): rejected group (2 ms) - AFN (no matching reader)
Display More1st remove oscam or any other softcam you have: go to plugins-remove plugins-goto softcams & remove oscam. make sure you manually remove any files related to oscam like oscam.log, etc.
depending on your image you may or not have a "sofcam script" menu. this one should disepear when you uninstall oscam. this menu is is stopping the creation of the var/volatile/tmp/.ncam folder where the downloaded softcam.key files should be installed by the readers.
then you can install the ipk file. as for files in config folder you can manually copy ncam.conf, ncam.server and ncam.user from the attached file:
[attach=199468]
or download from here:Ncam Emu compiled and patched by READ
Would scripts perhaps be in /etc/init.d ?
Update:
opkg uninstall <both osam-emu AND ncam>.
Reboted. FTP into box. Search for anything softcam related. Nothing but Softcam none (for the softcam manager).
So nothing to delete.
Installed ncam .ikp from here. Rebooted box.
Placeed just my softcam.keys file in config. folder. Restarted. cw1 & cw1 cycling in Softcam setup (red button, Softcam Setup).
No video.
Looked in ncam.conf to find the webif port. Changed it to port 8888 because....why the hell not? I like to keep them consistent.
Opened the webif. Configuration>DVB-Api.
API for extended cw's set to 2. Changed it to 1 - OE2.2. Saved it.
Restarted ncam. Channels clearing. Cool!
But......nope. No purported folders and such in /var/voatile/tmp.
See? :
ncam.jpg
What is the goal here bud ? What are you trying to achieve that your old oscam emu could not do ?
What is the goal here bud ? What are you trying to achieve that your old oscam emu could not do ?
Sir. The intention is to see what the hype of ncam is all about. Number one.
Number two. To see if what others say is true using it. That AFN keys will come from updated github softcam.keys files that are downloaded when ncam is restarted. To make this whole AFN hourly new-key-posts and ftp into my file system to place them less of a pain in the butt.
Perhaps a simple restart from the webif, or a crafty cron job.
I actually gave up on AFN when they went verimatrix. Which brings up other questions. Thinking pv on afn was no more.
Nevertheless. Being a long time oscam-emu user. Ncam seems like a PITA. Especially from the barrage of other users with the same issues, which makes me feel like at least I'm "not doing it right"....thank GOD the purE2 guy is not around here anymore. You know. gorkaroon!!
And also to bring forth that obviously not all platforms using the .ipk install method is not working all that well.
I thought it would be cool to see if this would be a quick and cool install to keep this hobby interesting. I'm still positive about it.
And. As other posts go here and other places. It has not at least gone stagnant.
Oh. FYI. I did create .ncam manually and it populated with a keys file immediately upon restarting ncam.
You asked, I delivered. We good?
yup all good bud, FYI ncam will not help with your particular needs, it is a fork of oscam emu and i know your a 100% only a EMU user.
You can simply add these 2 readers to your normal oscam emu oscam.server file, and keep your own softcam.key file active as well.
They are 2 github accounts that update keys online, there are other github accounts out there as well so add other reader too is you like.
[reader]
label = Emulator AFN
enable = 1
protocol = emu
device = emulator
device = https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = Emulator_AFN2
protocol = emu
device = https://raw.githubusercontent.com/JetCamFastCam/JetFastCamRza/main/SoftCam.Key
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
yup all good bud, FYI ncam will not help with your particular needs, it is a fork of oscam emu and i know your a 100% only a EMU user.
You can simply add these 2 readers to your normal oscam emu oscam.server file, and keep your own softcam.key file active as well.
They are 2 github accounts that update keys online, there are other github accounts out there as well so add other reader too is you like.
CodeDisplay More[reader] label = Emulator AFN enable = 1 protocol = emu device = emulator device = https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2602:000000;2610:000000;4AE1:000011,000014,0000FE group = 5 emmcache = 2,1,2,1 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE [reader] label = Emulator_AFN2 protocol = emu device = https://raw.githubusercontent.com/JetCamFastCam/JetFastCamRza/main/SoftCam.Key caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2602:000000;2610:000000;4AE1:000011,000014,0000FE group = 5 emmcache = 2,1,2,1 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
you're right. there is another github account from mohamed witch can be assigned to another reader, and it will download an updated sofcam.key file when the ecm keys expired.
Display More1st remove oscam or any other softcam you have: go to plugins-remove plugins-goto softcams & remove oscam. make sure you manually remove any files related to oscam like oscam.log, etc.
depending on your image you may or not have a "sofcam script" menu. this one should disepear when you uninstall oscam. this menu is is stopping the creation of the var/volatile/tmp/.ncam folder where the downloaded softcam.key files should be installed by the readers.
then you can install the ipk file. as for files in config folder you can manually copy ncam.conf, ncam.server and ncam.user from the attached file:
[attach=199468]
or download from here:Ncam Emu compiled and patched by READ
Would scripts perhaps be in /etc/init.d ?
depends on your image. my vix image had it in /etc/init.d folder.
i would enable !afn service from built in emulator so it won't be queue of finding keys on built in emulator since its no longer updating anymore when internet ones are priority for only afn service...it work for me
Display MoreDisplay More1st remove oscam or any other softcam you have: go to plugins-remove plugins-goto softcams & remove oscam. make sure you manually remove any files related to oscam like oscam.log, etc.
depending on your image you may or not have a "sofcam script" menu. this one should disepear when you uninstall oscam. this menu is is stopping the creation of the var/volatile/tmp/.ncam folder where the downloaded softcam.key files should be installed by the readers.
then you can install the ipk file. as for files in config folder you can manually copy ncam.conf, ncam.server and ncam.user from the attached file:
or download from here:Ncam Emu compiled and patched by READ
Would scripts perhaps be in /etc/init.d ?
depends on your image. my vix image had it in /etc/init.d folder.
The only difference here is that the latest Ncam has been patched to use libcurl.
You can achieve the same results with Oscam if you patch that to use libcurl too. Or if you are unable to build and patch your own Oscam versions, then simply use a BASH script to download and install the Softcam.Key files from various GIT's to your keys folder every 15 mins or so using cron. You simply then just setup a hotkey to your job manager and then just pressing one key on your remote will run the script and open AFN for you.
AFN package works well , but something is still missing in your configurations , probably in oscam.server.
Did you add AFN emulator in oscam.server and change some parameters in Service in Webif ? I use oscam emu ,
but I think that is configuration same for both ncam and oscam . Or if you can attach here your oscam.server.
Thank you.
yes i do notice his configuration is no difference with few extra tweaks from mine that i still have issue with caching internet softcam.key file that i have to reset the oscam or ncam so system re-download new softcam.key for every update changes due to emulator just cache internet key into reciever memory and doesn't expired or flush old data when internet keys change again while oscam still using outdated ones from memory.
is there a setting to prevent caching online keys to memory ??
Display MoreDisplay MoreDisplay More1st remove oscam or any other softcam you have: go to plugins-remove plugins-goto softcams & remove oscam. make sure you manually remove any files related to oscam like oscam.log, etc.
depending on your image you may or not have a "sofcam script" menu. this one should disepear when you uninstall oscam. this menu is is stopping the creation of the var/volatile/tmp/.ncam folder where the downloaded softcam.key files should be installed by the readers.
then you can install the ipk file. as for files in config folder you can manually copy ncam.conf, ncam.server and ncam.user from the attached file:
or download from here:Ncam Emu compiled and patched by READ
Would scripts perhaps be in /etc/init.d ?
depends on your image. my vix image had it in /etc/init.d folder.
not work
Hello, i have Ncam patched by RAED v12.5 r1 on Corelec Mecool KIII.
Its possible to update no last revision?
Display MoreDisplay MoreDisplay MoreDisplay More1st remove oscam or any other softcam you have: go to plugins-remove plugins-goto softcams & remove oscam. make sure you manually remove any files related to oscam like oscam.log, etc.
depending on your image you may or not have a "sofcam script" menu. this one should disepear when you uninstall oscam. this menu is is stopping the creation of the var/volatile/tmp/.ncam folder where the downloaded softcam.key files should be installed by the readers.
then you can install the ipk file. as for files in config folder you can manually copy ncam.conf, ncam.server and ncam.user from the attached file:
or download from here:Ncam Emu compiled and patched by READ
Would scripts perhaps be in /etc/init.d ?
depends on your image. my vix image had it in /etc/init.d folder.
not work
Update ...
Ncam V12.6
-Test Version for download AFN keys
-[dvbapi] Clear ECM pids on CA PMT updates as well
(ECM pids where not cleared when a CA PMT update was received. This was actually a bug carried over from the old code.)
-[dvbapi] Only process valid CAIDS and ECM / EMM pids
(CAID 0x0000 is not valid (reserved by EBU). Pid 0x1FFF is reserved for NULL packets.)
-[dvbapi] Make log message more clear
(When there is a transition from scrambled to FTA or vice versa for a channel, we are not exactly continuing descrambling)
-[dvbapi] Do not block ECM / EMM pid 0x1FFF
-(ECM pid 0x1FFF is used in the fake ecm request for BISS. We cannot block it!)
-In this version we try to make ncam to download new keys for AFN channels from any files that always up to date on github ...
(I have use default this files inside ncam.server config file (Thank you JetCamFastCam))
-The ncam.server file now update and you can find the new reader like this
[reader]
### This reader automatically downloads afn keys into memory if label = github:"and path" and if the keys are invalid or missing from the SoftCam.Key file. If you want to find the keys, use debug 2 or 4.
### If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
#label = github:"and path"
label = github:JetCamFastCam/JetFastCamRza/main/SoftCam.Key
#label = github:fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
#label = github:smcam/s/main/SoftCam.Key
#label = github:MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
enable = 1
protocol = emu
#device = emulator
#device = https://raw.githubusercontent.com/fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
#device = https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key
#device = https://raw.githubusercontent.com/JetCamFastCam/JetFastCamRza/main/SoftCam.Key
device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
So you can add and url what you like in (label) option
-If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
P.s: The keys should be update in softcam.keys in github what you are using. If not update it then ncam will download old keys.
Display MoreUpdate ...
Ncam V12.6
-Test Version for download AFN keys
Code-[dvbapi] Clear ECM pids on CA PMT updates as well (ECM pids where not cleared when a CA PMT update was received. This was actually a bug carried over from the old code.) -[dvbapi] Only process valid CAIDS and ECM / EMM pids (CAID 0x0000 is not valid (reserved by EBU). Pid 0x1FFF is reserved for NULL packets.) -[dvbapi] Make log message more clear (When there is a transition from scrambled to FTA or vice versa for a channel, we are not exactly continuing descrambling) -[dvbapi] Do not block ECM / EMM pid 0x1FFF -(ECM pid 0x1FFF is used in the fake ecm request for BISS. We cannot block it!)
-In this version we try to make ncam to download new keys for AFN channels from any files that always up to date on github ...
(I have use default this files inside ncam.server config file (Thank you JetCamFastCam))
https://github.com/JetCamFastC…Rza/blob/main/SoftCam.Key
-The ncam.server file now update and you can find the new reader like this
CodeDisplay More[reader] ### This reader automatically downloads afn keys into memory if label = github:"and path" and if the keys are invalid or missing from the SoftCam.Key file. If you want to find the keys, use debug 2 or 4. ### If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts. #label = github:"and path" label = github:JetCamFastCam/JetFastCamRza/main/SoftCam.Key #label = github:fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key #label = github:smcam/s/main/SoftCam.Key #label = github:MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key enable = 1 protocol = emu #device = emulator #device = https://raw.githubusercontent.com/fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key #device = https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key #device = https://raw.githubusercontent.com/JetCamFastCam/JetFastCamRza/main/SoftCam.Key device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key disablecrccws_only_for = 0E00:000000 caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE group = 1 emmcache = 2,1,2,1 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
So you can add and url what you like in (label) option
-If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
P.s: The keys should be update in softcam.keys in github what you are using. If not update it then ncam will download old keys.
Download link pls.
Look in first post on this thread
Don’t have an account yet? Register yourself now and be a part of our community!